add 315mhz RF gateway (#209)

based on RF gateway add the same implementation for 315mhz to facilitate the integration for whom who wants to use 433 and 315
2018-05-30 21:49:46 +02:00
1 parent 11e5bd3f00
commit b568e7137c
@@ -0,0 +1,66 @@
+/*  
+  OpenMQTTGateway  - ESP8266 or Arduino program for home automation 
+
+   Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal  and a MQTT broker 
+   Send and receiving command by MQTT
+ 
+   This files enables to set your parameter for the radiofrequency gateways (ZgatewayRF315 ) with RCswitch  library
+  
+    Copyright: (c)Florian ROBERT
+  
+    This file is part of OpenMQTTGateway.
+    
+    OpenMQTTGateway is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    OpenMQTTGateway is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*-------------------RF topics & parameters----------------------*/
+//433Mhz MQTT Subjects and keys
+#define subjectMQTTtoRF315  Base_Topic Gateway_Name "/commands/MQTTto315"
+#define subjectRF315toMQTT  Base_Topic Gateway_Name "/315toMQTT"
+#define subjectGTWRF315toMQTT  Base_Topic Gateway_Name "/315toMQTT"
+#define subjectRF315toMQTTprotocol  Base_Topic Gateway_Name "/315toMQTT/protocol"
+#define subjectRF315toMQTTbits  Base_Topic Gateway_Name "/315toMQTT/bits"
+#define subjectRF315toMQTTlength  Base_Topic Gateway_Name "/315toMQTT/length"
+#define RF315protocolKey "315_" // protocol will be defined if a subject contains RFprotocolKey followed by a value of 1 digit
+#define RF315bitsKey "RFBITS_" // bits  will be defined if a subject contains RFbitsKey followed by a value of 2 digits
+#define repeatRF315wMQTT false // do we repeat a received signal by using mqtt
+/*
+RF supported protocols
+315_1
+315_2
+315_3
+315_4
+315_5
+315_6
+*/
+#define RF315pulselengthKey "PLSL_" // pulselength will be defined if a subject contains RFprotocolKey followed by a value of 3 digits
+// subject monitored to listen traffic processed by other gateways to store data and avoid ntuple
+#define subjectMultiGTWRF315 "+/315toMQTT"
+//RF number of signal repetition
+#define RF315_EMITTER_REPEAT 20
+
+/*-------------------PIN DEFINITIONS----------------------*/
+#ifdef ESP8266
+    #define RF315_RECEIVER_PIN 4 // D3 on nodemcu
+    #define RF315_EMITTER_PIN 5 // RX on nodemcu
+#elif defined(ESP32)
+    #define RF315_RECEIVER_PIN 13 // D13 on DOIT ESP32
+    #define RF315_EMITTER_PIN 12 // D12 on DOIT ESP32
+#else
+    //IMPORTANT NOTE: On arduino UNO connect IR emitter pin to D9 , comment #define IR_USE_TIMER2 and uncomment #define IR_USE_TIMER1 on library <library>IRremote/IRremoteInt.h so as to free pin D3 for RF RECEIVER PIN
+    //RF PIN definition
+    #define RF315_RECEIVER_PIN 1 //1 = D3 on arduino
+    #define RF315_EMITTER_PIN 4 //4 = D4 on arduino
+#endif
+