Florian
b568e7137c
based on RF gateway add the same implementation for 315mhz to facilitate the integration for whom who wants to use 433 and 315
67 lines
2.9 KiB
C
67 lines
2.9 KiB
C
/*
|
|
OpenMQTTGateway - ESP8266 or Arduino program for home automation
|
|
|
|
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
|
|
Send and receiving command by MQTT
|
|
|
|
This files enables to set your parameter for the radiofrequency gateways (ZgatewayRF315 ) with RCswitch library
|
|
|
|
Copyright: (c)Florian ROBERT
|
|
|
|
This file is part of OpenMQTTGateway.
|
|
|
|
OpenMQTTGateway is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
OpenMQTTGateway is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/*-------------------RF topics & parameters----------------------*/
|
|
//433Mhz MQTT Subjects and keys
|
|
#define subjectMQTTtoRF315 Base_Topic Gateway_Name "/commands/MQTTto315"
|
|
#define subjectRF315toMQTT Base_Topic Gateway_Name "/315toMQTT"
|
|
#define subjectGTWRF315toMQTT Base_Topic Gateway_Name "/315toMQTT"
|
|
#define subjectRF315toMQTTprotocol Base_Topic Gateway_Name "/315toMQTT/protocol"
|
|
#define subjectRF315toMQTTbits Base_Topic Gateway_Name "/315toMQTT/bits"
|
|
#define subjectRF315toMQTTlength Base_Topic Gateway_Name "/315toMQTT/length"
|
|
#define RF315protocolKey "315_" // protocol will be defined if a subject contains RFprotocolKey followed by a value of 1 digit
|
|
#define RF315bitsKey "RFBITS_" // bits will be defined if a subject contains RFbitsKey followed by a value of 2 digits
|
|
#define repeatRF315wMQTT false // do we repeat a received signal by using mqtt
|
|
/*
|
|
RF supported protocols
|
|
315_1
|
|
315_2
|
|
315_3
|
|
315_4
|
|
315_5
|
|
315_6
|
|
*/
|
|
#define RF315pulselengthKey "PLSL_" // pulselength will be defined if a subject contains RFprotocolKey followed by a value of 3 digits
|
|
// subject monitored to listen traffic processed by other gateways to store data and avoid ntuple
|
|
#define subjectMultiGTWRF315 "+/315toMQTT"
|
|
//RF number of signal repetition
|
|
#define RF315_EMITTER_REPEAT 20
|
|
|
|
/*-------------------PIN DEFINITIONS----------------------*/
|
|
#ifdef ESP8266
|
|
#define RF315_RECEIVER_PIN 4 // D3 on nodemcu
|
|
#define RF315_EMITTER_PIN 5 // RX on nodemcu
|
|
#elif defined(ESP32)
|
|
#define RF315_RECEIVER_PIN 13 // D13 on DOIT ESP32
|
|
#define RF315_EMITTER_PIN 12 // D12 on DOIT ESP32
|
|
#else
|
|
//IMPORTANT NOTE: On arduino UNO connect IR emitter pin to D9 , comment #define IR_USE_TIMER2 and uncomment #define IR_USE_TIMER1 on library <library>IRremote/IRremoteInt.h so as to free pin D3 for RF RECEIVER PIN
|
|
//RF PIN definition
|
|
#define RF315_RECEIVER_PIN 1 //1 = D3 on arduino
|
|
#define RF315_EMITTER_PIN 4 //4 = D4 on arduino
|
|
#endif
|
|
|