chriz/OpenMQTT-Gateway
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 5 Wiki Activity

[DOCS] Remove HM10 (#1284)

Browse Source
This commit is contained in:
Florian authored and GitHub committed 2022-10-11 19:43:15 -05:00
1 parent bf38bb52f6
commit b0fc25bfe0
3 files changed
+1 -30
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

docs/prerequisites/parts.md
-1
View File
@@ -10,7 +10,6 @@ Here is below the main parts reference.
|-|:-:|:-:|:-:|:-:|:-:|
|SRX882 / STX882|X|-||-|-|
|CC1101|X|-|-|-|-|
|HM10|-|-|X|-|-|
|38KHz IR emitter and receiver|-|X|-|-|-|
|SX1276|-|-|-|X|-|
|A6/A7|-|-|-|-|X|
docs/setitup/ble.md
+1 -28
View File
@@ -7,31 +7,4 @@ You can use a barebone ESP32 or some nice looking products like the ones below (
![](../img/OpenMQTTgateway_M5_Atom_Board.png)
![](../img/OpenMQTTgateway_M5_Stack_Board_Display_Text.png)
For Arduino and ESP8266 you can use an HM10 or HM11 below.
|Module|Purpose|Where to Buy|
|-|-|-|
|HM 10 Keyes bluetooth module|Bluetooth|[compatible parts list](https://compatible.openmqttgateway.com/index.php/parts)|
## Pinout
|Module Pin|Board RX Pin|Board TX Pin|
|-|:-:|:-:|
|Arduino|D6 to HM10 RX|D5 to HM10 TX|
|ESP8266|D6 to HM10 RX|D7 to HM10 TX|
Vcc pin of the board and the HM10 Module to a 5V supply source.
Ground pins of the board and the HM10 Module to the ground of the supply source.
### Debugging the HM10
So as to communicate directly with the HM10 you may use [this program](https://github.com/1technophile/serial_modules_debug) from Martin Currey, you can upload it to your ESP board and it will enable without an FTDI to write and read commands directly to the HM10 through the ESP. You may use the Arduino IDE Serial Monitor to read and send the commands.
The baud rate of the HM10/11 module must be set to 9600 bauds , the command `AT+BAUD?` enables to know at which speed the module is set.
So as to set it to 9600 that you may use `AT+BAUD0` command.
The HM10/11 firmware version must be >= V709 the command `AT+VERS?` enables to know the firmware version.
## Arduino Hardware setup
![BLE Arduino](../img/OpenMQTTgateway_Arduino_Addon_BT.png)
## ESP8266 Hardware setup
![BLE ESP8266](../img/OpenMQTTgateway_ESP8266_Addon_BT.png)
The implementation with the HM10 module would not have been possible without the work of [Martin Currey]( http://www.martyncurrey.com), thanks!
For Arduino and ESP8266, we previously used HM10, this module is no longer supported by OpenMQTTGateway, prefer an ESP32.
docs/upload/web-install.md
-1
View File
@@ -53,7 +53,6 @@ The table below describes the libraries and the modules of each board configurat
|esp32dev-ble-datatest|ESP32 dev board|Default BLE gateway with additional servicedata, manufacturerdata and service uuid for analysing decoding issues|-|-|X|-|
|**ESP8266**|
|nodemcuv2-2g|ESP8266 board|SMS gateway, need A6/A7 GSM module|-|-|-|-|
|nodemcuv2-ble|ESP8266 board|BLE gateway, need HM10 Module|-|-|X|-|
|nodemcuv2-ir|ESP8266 board|Infrared gateway using [IRremoteESP8266](https://github.com/crankyoldgit/IRremoteESP8266)|-|X|-|-|
|nodemcuv2-rf-cc1101|ESP8266 board|RF gateway using [RCSwitch](https://github.com/1technophile/rc-switch) library, need CC1101|X|-|-|-|
|nodemcuv2-rf|ESP8266 board|RF gateway using [RCSwitch](https://github.com/1technophile/rc-switch) library|X|-|-|-|