ESPilight support

Support for ESPilight - only recieve at the moment

OpenMQTTGateway.ino

@@ -61,7 +61,7 @@
 #include <ArduinoJson.h>
 
 // Modules config inclusion
-#if defined(ZgatewayRF) || defined(ZgatewayRF2)
+#if defined(ZgatewayRF) || defined(ZgatewayRF2) || defined(ZgatewayPilight)
   #include "config_RF.h"
 #endif
 #ifdef ZgatewayRF315
@@ -355,6 +355,9 @@ void setup()
   #ifdef ZgatewayRF2
     setupRF2();
   #endif
+  #ifdef ZgatewayPilight
+    setupPilight();
+  #endif
   #ifdef ZgatewaySRFB
     setupSRFB();
   #endif
@@ -632,6 +635,13 @@ void loop()
       timer_led_receive = millis();
       }
     #endif
+    #ifdef ZgatewayPilight
+      if(PilighttoMQTT()){
+      trc(F("PilighttoMQTT OK"));
+      digitalWrite(led_receive, LOW);
+      timer_led_receive = millis();
+      }
+    #endif
     #ifdef ZgatewaySRFB
       if(SRFBtoMQTT())
       trc(F("SRFBtoMQTT OK"));
@@ -718,6 +728,9 @@ void stateMeasures(){
       #ifdef ZgatewayRF2
           modules = modules  + ZgatewayRF2;
       #endif
+      #ifdef ZgatewayPilight
+          modules = modules  + ZgatewayPilight;
+      #endif
       #ifdef ZgatewaySRFB
           modules = modules  + ZgatewaySRFB;
       #endif
@@ -808,6 +821,9 @@ digitalWrite(led_send, LOW);
 #ifdef ZgatewayRF2
   MQTTtoRF2(topicOri, datacallback);
 #endif
+#ifdef ZgatewayPilight
+  MQTTtoPilight(topicOri, datacallback);
+#endif
 #ifdef Zgateway2G
   MQTTto2G(topicOri, datacallback);
 #endif

User_config.h

@@ -94,6 +94,7 @@ const byte subnet[] = { 255, 255, 255, 0 }; //ip adress
 #define ZgatewayIR     "IR"       //ESP8266, Arduino,         Sonoff RF Bridge
 #define ZgatewayBT     "BT"       //ESP8266, Arduino, ESP32
 //#define ZgatewayRF2    "RF2"      //ESP8266, Arduino, ESP32
+//#define ZgatewayPilight  "Pilight" //ESP8266
 //#define ZgatewaySRFB   "SRFB"     //                          Sonoff RF Bridge
 //#define Zgateway2G     "2G"       //ESP8266, Arduino, ESP32
 //#define ZactuatorONOFF "ONOFF"    //ESP8266, Arduino, ESP32,  Sonoff RF Bridge

ZgatewayPilight.ino

@@ -0,0 +1,99 @@
+/*  
+  OpenMQTTGateway  - ESP8266 or Arduino program for home automation 
+
+   Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal  and a MQTT broker 
+   Send and receiving command by MQTT
+ 
+  This gateway enables to:
+ - publish MQTT data to a different topic related to received 433Mhz signal using ESPiLight
+
+    Copyright: (c)Florian ROBERT
+    Copyright: (c)Randy Simons http://randysimons.nl/
+  
+    This file is part of OpenMQTTGateway.
+    
+    OpenMQTTGateway is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    OpenMQTTGateway is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef ZgatewayPilight
+
+#include <ESPiLight.h>
+
+ESPiLight rf(RF_EMITTER_PIN);  // use -1 to disable transmitter
+
+struct Pilightrxd
+{
+  String protocol;
+  String deviceID;
+  String status;
+  String message;
+  bool hasNewData;
+};
+
+Pilightrxd pilightrd;
+
+void setupPilight(){
+    #ifndef ZgatewayRF && ZgatewayRF2 //receiving with Pilight is not compatible with ZgatewayRF or RF2 as far as I can tell 
+        rf.setCallback(pilightCallback);
+        rf.initReceiver(RF_RECEIVER_PIN);
+        trc(F("RF_EMITTER_PIN "));
+        trc(String(RF_EMITTER_PIN));
+        trc(F("RF_RECEIVER_PIN "));
+        trc(String(RF_RECEIVER_PIN));
+        trc(F("ZgatewayPilight setup done "));
+    #endif 
+}
+
+boolean PilighttoMQTT(){
+  rf.loop();
+
+  if(pilightrd.hasNewData){
+    
+    pilightrd.hasNewData=false;
+    trc(F("Rcv. Pilight"));
+    String MQTTprotocol;
+    String MQTTdeviceID;
+    String MQTTstatus;
+    String MQTTmessage;
+
+    MQTTprotocol = String(pilightrd.protocol);
+    MQTTdeviceID = String(pilightrd.deviceID);
+    MQTTstatus = String(pilightrd.status);
+    MQTTmessage = String(pilightrd.message);
+    String MQTTPilightstring;
+    MQTTPilightstring = subjectPilighttoMQTT+String("/")+MQTTprotocol+String("/")+MQTTdeviceID;
+    trc(F("Adv data PilighttoMQTT"));
+    client.publish((char *)MQTTPilightstring.c_str(),(char *)MQTTmessage.c_str());  
+    return true;
+    
+  }
+  return false;
+}
+
+void pilightCallback(const String &protocol, const String &message, int status,
+                size_t repeats, const String &deviceID) {
+
+  pilightrd.protocol=protocol;
+  pilightrd.deviceID=deviceID;
+  pilightrd.status=status;
+  pilightrd.message=message;
+  pilightrd.hasNewData=true;
+
+}
+
+void MQTTtoPilight(char * topicOri, char * datacallback) {
+
+}
+
+#endif

config_RF.h

@@ -60,6 +60,11 @@ RF supported protocols
 #define RF2groupKey "GROUP_"  // number of your group value  will be defined if a subject contains RF2groupKey followed by a value of 1 digit
 #define RF2dimKey "DIM"  // number of your dim value will be defined if a subject contains RF2dimKey and the payload contains the dim value as digits
 
+/*-------------------ESPPiLight topics & parameters----------------------*/
+//433Mhz Pilight MQTT Subjects and keys
+#define subjectMQTTtoPilight  Base_Topic Gateway_Name "/commands/MQTTtoPilight"
+#define subjectPilighttoMQTT  Base_Topic Gateway_Name "/PilighttoMQTT"
+
 /*-------------------PIN DEFINITIONS----------------------*/
 #ifdef ESP8266
     #define RF_RECEIVER_PIN 0 // D3 on nodemcu