[ONOFF] ON OFF behavior fixes (#1828)

-Avoid plug restart in case of OverCurrent detection, introduced with central queue add
-publish uselaststate value
-if uselaststate is false we switch off the relay at restart

main/ZactuatorONOFF.ino

@@ -121,8 +121,11 @@ void setupONOFF() {
 #  ifdef ACTUATOR_ONOFF_DEFAULT
   digitalWrite(ACTUATOR_ONOFF_GPIO, ACTUATOR_ONOFF_DEFAULT);
 #  elif defined(ESP32)
-  if (ONOFFConfig.useLastStateOnStart)
+  if (ONOFFConfig.useLastStateOnStart) {
     digitalWrite(ACTUATOR_ONOFF_GPIO, ONOFFConfig.ONOFFState);
+  } else {
+    digitalWrite(ACTUATOR_ONOFF_GPIO, !ACTUATOR_ON);
+  }
 #  endif
   updatePowerIndicator();
   Log.trace(F("ZactuatorONOFF setup done" CR));
@@ -194,6 +197,7 @@ void MQTTtoONOFF(char* topicOri, JsonObject& ONOFFdata) {
 
     // Load config from json if available
     ONOFFConfig_fromJson(ONOFFdata);
+    stateONOFFMeasures();
   }
 }
 #  endif
@@ -285,14 +289,12 @@ void ActuatorTrigger() {
   } else {
     PowerIndicatorOFF();
   }
-  // Send the state of the switch to the broker so as to update the status
-  StaticJsonDocument<64> jsonBuffer;
-  JsonObject ONOFFdata = jsonBuffer.to<JsonObject>();
-  ONOFFdata["cmd"] = (int)level;
-  ONOFFdata["origin"] = subjectGTWONOFFtoMQTT;
-  handleJsonEnqueue(ONOFFdata, QueueSemaphoreTimeOutTask);
+
 #  ifdef ESP32
   if (ONOFFConfig.useLastStateOnStart) {
+    StaticJsonDocument<64> jsonBuffer;
+    JsonObject ONOFFdata = jsonBuffer.to<JsonObject>();
+    ONOFFdata["cmd"] = (int)level;
     ONOFFdata["save"] = true;
     ONOFFConfig_fromJson(ONOFFdata);
   }
@@ -302,9 +304,12 @@ void ActuatorTrigger() {
 
 void stateONOFFMeasures() {
   //Publish actuator state
-  StaticJsonDocument<64> jsonBuffer;
+  StaticJsonDocument<128> jsonBuffer;
   JsonObject ONOFFdata = jsonBuffer.to<JsonObject>();
   ONOFFdata["cmd"] = (int)digitalRead(ACTUATOR_ONOFF_GPIO);
+#  ifdef ESP32
+  ONOFFdata["uselaststate"] = ONOFFConfig.useLastStateOnStart;
+#  endif
   ONOFFdata["origin"] = subjectGTWONOFFtoMQTT;
   handleJsonEnqueue(ONOFFdata, QueueSemaphoreTimeOutTask);
 }

main/ZmqttDiscovery.ino

@@ -949,7 +949,7 @@ void pubMqttDiscovery() {
 
 #  ifdef ZactuatorONOFF
   Log.trace(F("actuatorONOFFDiscovery" CR));
-  char* actuatorONOFF[8] = {"switch", "actuatorONOFF", "", "", "", "{\"cmd\":1}", "{\"cmd\":0}", ""};
+  char* actuatorONOFF[8] = {"switch", "actuatorONOFF", "", "", "{{ value_json.cmd }}", "{\"cmd\":1}", "{\"cmd\":0}", ""};
   //component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
 
   //trc(actuatorONOFF[1]);
@@ -959,7 +959,8 @@ void pubMqttDiscovery() {
                   actuatorONOFF[5], actuatorONOFF[6], actuatorONOFF[7],
                   0, Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoONOFF,
                   "", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
-                  stateClassNone //State Class
+                  stateClassNone, //State Class
+                  "0", "1" //state_off, state_on
   );
 #  endif
 

main/ZsensorRN8209.ino

@@ -106,7 +106,7 @@ void setupRN8209() {
   cal.EC = RN8209_EC;
   set_user_param(cal);
   init_8209c_interface();
-  xTaskCreate(rn8209_loop, "rn8209_loop", 5000, NULL, 10, &rn8209TaskHandle);
+  xTaskCreate(rn8209_loop, "rn8209_loop", 5500, NULL, 10, &rn8209TaskHandle);
   //esp_task_wdt_add(rn8209TaskHandle);
   Log.trace(F("ZsensorRN8209 setup done " CR));
 }