[DOC] Tip correction

docs/prerequisites/board.md

@@ -36,7 +36,7 @@ The boards below need hardware [parts](parts.md) and electronic/hardware compete
 |ESP32|X|X|X|X|not tested|X|X|
 |ESP8266|X|X|X|not tested|X|X|X|
 
-::: tip INFO
+::: tip
 Pilight is only supported on ESP, Arduino UNO handle only 32bits values in our context.
 Setup based on HM10 doesn't support some BLE [devices](devices.md#for-ble-devices).
 :::

docs/prerequisites/devices.md

@@ -39,7 +39,7 @@ OpenMQTTGateway is able to scan all the BLE devices that advertise their data so
 
 Exhaustive list [here](https://compatible.openmqttgateway.com/index.php/devices/ble-devices/)
 
-::: tip INFO
+::: tip
 - (1) Not supported with HM10.
 - (2) See https://github.com/atc1441/ATC_MiThermometer
 :::

docs/prerequisites/parts.md

@@ -15,6 +15,6 @@ Here is below the main parts reference.
 |SX1276|-|-|-|X|-|
 |A6/A7|-|-|-|-|X|
 
-::: tip INFO
+::: tip
 There is a wide range of parts available that may be compatible with OpenMQTTGateway, the ones [listed](https://compatible.openmqttgateway.com/index.php/parts/) are the ones tested and for which you can ask for support. Indeed for other parts we may not have it so as to reproduce the issue, or in the worst case they may not be compatible.
 :::

docs/use/actuators.md

@@ -102,7 +102,7 @@ The json message must contain two properties:
 * remote: the index of the remote which is used to send the command (index start at zero)
 * command: the command which should be send with the remote as string, see [table of command names](https://github.com/Legion2/Somfy_Remote_Lib#available-commands).
 
-::: tip NOTE
+::: tip
 The middle button on physical Somfy RTS Remote controls is called "My".
 :::
 

docs/use/ble.md

@@ -93,7 +93,7 @@ Once the forced scan has completed, the previous scan interval value will be res
 
 The default value `TimeBtwRead` is set into config_BT.h or into your .ini file for platformio users.
 
-::: tip INFO
+::: tip
 For certain devices like LYWSD03MMC OpenMQTTGateway use a connection (due to the fact that the advertized data are encrypted), this connection mechanism is launched after every `ScanBeforeConnect` per default, you can modify it by following the procedure below.
 :::