chriz/OpenMQTT-Gateway
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 5 Wiki Activity
Files
f6fa1e52dacbf30953449467cd8ae3a55993fa52
OpenMQTT-Gateway/main/main.ino
T

1592 lines
43 KiB
Arduino
Raw Blame History

/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Send and receiving command by MQTT
This program enables to:
- receive MQTT data from a topic and send signal (RF, IR, BLE, GSM) corresponding to the received MQTT data
- publish MQTT data to a different topic related to received signals (RF, IR, BLE, GSM)
Copyright: (c)Florian ROBERT
This file is part of OpenMQTTGateway.
OpenMQTTGateway is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
OpenMQTTGateway is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "User_config.h"
// array to store previous received RFs, IRs codes and their timestamps
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
#define array_size 12
unsigned long ReceivedSignal[array_size][2] = {{0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}};
//Time used to wait for an interval before checking system measures
unsigned long timer_sys_measures = 0;
#else // boards with smaller memory
#define array_size 4
unsigned long ReceivedSignal[array_size][2] = {{0, 0}, {0, 0}, {0, 0}, {0, 0}};
#endif
#include <PubSubClient.h>
#include <ArduinoJson.h>
#include <ArduinoLog.h>
// Modules config inclusion
#if defined(ZgatewayRF) || defined(ZgatewayRF2) || defined(ZgatewayPilight)
#include "config_RF.h"
#endif
#ifdef ZgatewayWeatherStation
#include "config_WeatherStation.h"
#endif
#ifdef ZgatewayLORA
#include "config_LORA.h"
#endif
#ifdef ZgatewaySRFB
#include "config_SRFB.h"
#endif
#ifdef ZgatewayBT
#include "config_BT.h"
#endif
#ifdef ZgatewayIR
#include "config_IR.h"
#endif
#ifdef Zgateway2G
#include "config_2G.h"
#endif
#ifdef ZactuatorONOFF
#include "config_ONOFF.h"
#endif
#ifdef ZsensorINA226
#include "config_INA226.h"
#endif
#ifdef ZsensorHCSR501
#include "config_HCSR501.h"
#endif
#ifdef ZsensorADC
#include "config_ADC.h"
#endif
#ifdef ZsensorBH1750
#include "config_BH1750.h"
#endif
#ifdef ZsensorTSL2561
#include "config_TSL2561.h"
#endif
#ifdef ZsensorBME280
#include "config_BME280.h"
#endif
#ifdef ZsensorHTU21
#include "config_HTU21.h"
#endif
#ifdef ZsensorHCSR04
#include "config_HCSR04.h"
#endif
#ifdef ZsensorDHT
#include "config_DHT.h"
#endif
#ifdef ZsensorDS1820
#include "config_DS1820.h"
#endif
#ifdef ZgatewayRFM69
#include "config_RFM69.h"
#endif
#ifdef ZsensorGPIOInput
#include "config_GPIOInput.h"
#endif
#ifdef ZsensorGPIOKeyCode
#include "config_GPIOKeyCode.h"
#endif
#ifdef ZmqttDiscovery
#include "config_mqttDiscovery.h"
#endif
#ifdef ZactuatorFASTLED
#include "config_FASTLED.h"
#endif
#if defined(ZboardM5STICKC) || defined(ZboardM5STACK)
#include "config_M5.h"
#endif
/*------------------------------------------------------------------------*/
//adding this to bypass the problem of the arduino builder issue 50
void callback(char *topic, byte *payload, unsigned int length);
bool connectedOnce = false; //indicate if we have been connected once to MQTT
int failure_number_ntwk = 0; // number of failure connecting to network
int failure_number_mqtt = 0; // number of failure connecting to MQTT
#ifdef ESP32
#include <FS.h>
#include "SPIFFS.h"
#include <WiFi.h>
#include <ArduinoOTA.h>
#include <WiFiUdp.h>
#include "esp_wifi.h"
WiFiClient eClient;
#include <WiFiManager.h>
#include <Preferences.h>
Preferences preferences;
#ifdef MDNS_SD
#include <ESPmDNS.h>
#endif
#elif defined(ESP8266)
#include <FS.h>
#include <ESP8266WiFi.h>
#include <ArduinoOTA.h>
#include <DNSServer.h>
#include <ESP8266WebServer.h>
#include <WiFiManager.h>
WiFiClient eClient;
#ifdef MDNS_SD
#include <ESP8266mDNS.h>
#endif
#else
#include <Ethernet.h>
EthernetClient eClient;
#endif
// client link to pubsub mqtt
PubSubClient client(eClient);
//MQTT last attemps reconnection date
unsigned long lastMQTTReconnectAttempt = 0;
void revert_hex_data(char *in, char *out, int l)
{
//reverting array 2 by 2 to get the data in good order
int i = l - 2, j = 0;
while (i != -2)
{
if (i % 2 == 0)
out[j] = in[i + 1];
else
out[j] = in[i - 1];
j++;
i--;
}
out[l - 1] = '\0';
}
void extract_char(char *token_char, char *subset, int start, int l, bool reverse, bool isNumber)
{
char tmp_subset[l + 1];
memcpy(tmp_subset, &token_char[start], l);
tmp_subset[l] = '\0';
if (isNumber)
{
char tmp_subset2[l + 1];
if (reverse)
revert_hex_data(tmp_subset, tmp_subset2, l + 1);
else
strncpy(tmp_subset2, tmp_subset, l + 1);
long long_value = strtoul(tmp_subset2, NULL, 16);
sprintf(tmp_subset2, "%ld", long_value);
strncpy(subset, tmp_subset2, l + 1);
}
else
{
if (reverse)
revert_hex_data(tmp_subset, subset, l + 1);
else
strncpy(subset, tmp_subset, l + 1);
}
subset[l] = '\0';
}
int strpos(char *haystack, char *needle) //from @miere https://stackoverflow.com/users/548685/miere
{
char *p = strstr(haystack, needle);
if (p)
return p - haystack;
return -1;
}
char *ip2CharArray(IPAddress ip)
{ //from Nick Lee https://stackoverflow.com/questions/28119653/arduino-display-ethernet-localip
static char a[16];
sprintf(a, "%d.%d.%d.%d", ip[0], ip[1], ip[2], ip[3]);
return a;
}
bool to_bool(String const &s)
{ // thanks Chris Jester-Young from stackoverflow
return s != "0";
}
void pub(char *topicori, char *payload, bool retainFlag)
{
String topic = String(mqtt_topic) + String(topicori);
pubMQTT((char *)topic.c_str(), payload, retainFlag);
}
void pub(char *topicori, JsonObject &data)
{
Log.notice(F("Subject: %s" CR),topicori);
logJson(data);
if (client.connected())
{
digitalWrite(led_receive, HIGH);
String topic = String(mqtt_topic) + String(topicori);
#ifdef valueAsASubject
unsigned long value = data["value"];
if (value != 0)
{
topic = topic + "/" + String(value);
}
#endif
#ifdef jsonPublishing
Log.trace(F("jsonPublishing" CR));
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
char JSONmessageBuffer[data.measureLength() + 1];
#else
char JSONmessageBuffer[JSON_MSG_BUFFER];
#endif
data.printTo(JSONmessageBuffer, sizeof(JSONmessageBuffer));
pubMQTT(topic, JSONmessageBuffer);
#endif
#ifdef simplePublishing
Log.trace(F("simplePublishing" CR));
// Loop through all the key-value pairs in obj
for (JsonPair &p : data)
{
#if defined(ESP8266)
yield();
#endif
if (p.value.is<unsigned long>() && strcmp(p.key, "rssi") != 0)
{ //test rssi , bypass solution due to the fact that a int is considered as an unsigned long
if (strcmp(p.key, "value") == 0)
{ // if data is a value we don't integrate the name into the topic
pubMQTT(topic, p.value.as<unsigned long>());
}
else
{ // if data is not a value we integrate the name into the topic
pubMQTT(topic + "/" + String(p.key), p.value.as<unsigned long>());
}
}
else if (p.value.is<int>())
{
pubMQTT(topic + "/" + String(p.key), p.value.as<int>());
}
else if (p.value.is<float>())
{
pubMQTT(topic + "/" + String(p.key), p.value.as<float>());
}
else if (p.value.is<char *>())
{
pubMQTT(topic + "/" + String(p.key), p.value.as<const char *>());
}
}
#endif
}
else
{
Log.warning(F("client not connected can't pub" CR));
}
}
void pub(char *topicori, char *payload)
{
if (client.connected())
{
String topic = String(mqtt_topic) + String(topicori);
Log.trace(F("Pub ack %s into: %s" CR), payload, topic.c_str());
pubMQTT(topic, payload);
}
else
{
Log.warning(F("client not connected can't pub" CR));
}
}
void pub_custom_topic(char *topicori, JsonObject &data, boolean retain)
{
if (client.connected())
{
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
char JSONmessageBuffer[data.measureLength() + 1];
#else
char JSONmessageBuffer[JSON_MSG_BUFFER];
#endif
data.printTo(JSONmessageBuffer, sizeof(JSONmessageBuffer));
Log.trace(F("Pub json :%s into custom topic: %s" CR), JSONmessageBuffer, topicori);
pubMQTT(topicori, JSONmessageBuffer, retain);
}
else
{
Log.warning(F("client not connected can't pub" CR));
}
}
// Low level MQTT functions
void pubMQTT(char * topic, char * payload)
{
client.publish(topic, payload);
}
void pubMQTT(char * topicori, char * payload, bool retainFlag)
{
client.publish(topicori, payload, retainFlag);
}
void pubMQTT(String topic, char * payload)
{
client.publish((char *)topic.c_str(),payload);
}
void pubMQTT(char *topic, unsigned long payload)
{
char val[11];
sprintf(val, "%lu", payload);
client.publish(topic, val);
}
void pubMQTT(char *topic, unsigned long long payload)
{
char val[21];
sprintf(val, "%llu", payload);
client.publish(topic, val);
}
void pubMQTT(char *topic, String payload)
{
client.publish(topic, (char *)payload.c_str());
}
void pubMQTT(String topic, String payload)
{
client.publish((char *)topic.c_str(), (char *)payload.c_str());
}
void pubMQTT(String topic, int payload)
{
char val[12];
sprintf(val, "%d", payload);
client.publish((char *)topic.c_str(), val);
}
void pubMQTT(String topic, float payload)
{
char val[12];
dtostrf(payload, 3, 1, val);
client.publish((char *)topic.c_str(), val);
}
void pubMQTT(char *topic, float payload)
{
char val[12];
dtostrf(payload, 3, 1, val);
client.publish(topic, val);
}
void pubMQTT(char *topic, int payload)
{
char val[6];
sprintf(val, "%d", payload);
client.publish(topic, val);
}
void pubMQTT(char *topic, unsigned int payload)
{
char val[6];
sprintf(val, "%u", payload);
client.publish(topic, val);
}
void pubMQTT(char *topic, long payload)
{
char val[11];
sprintf(val, "%l", payload);
client.publish(topic, val);
}
void pubMQTT(char *topic, double payload)
{
char val[16];
sprintf(val, "%d", payload);
client.publish(topic, val);
}
void pubMQTT(String topic, unsigned long payload)
{
char val[11];
sprintf(val, "%lu", payload);
client.publish((char *)topic.c_str(), val);
}
void logJson(JsonObject &jsondata)
{
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
char JSONmessageBuffer[jsondata.measureLength() + 1];
#else
char JSONmessageBuffer[JSON_MSG_BUFFER];
#endif
jsondata.printTo(JSONmessageBuffer, sizeof(JSONmessageBuffer));
Log.notice(F("Received json : %s" CR),JSONmessageBuffer);
}
bool cmpToMainTopic(char * topicOri, char * toAdd){
char topic[mqtt_topic_max_size];
strcpy(topic,mqtt_topic);
strcat(topic,toAdd);
if (strstr(topicOri,topic) != NULL){
return true;
}else{
return false;
}
}
void connectMQTT()
{
#ifndef ESPWifiManualSetup
#if defined(ESP8266) || defined(ESP32)
checkButton(); // check if a reset of wifi/mqtt settings is asked
#endif
#endif
Log.warning(F("MQTT connection..." CR));
char topic[mqtt_topic_max_size];
strcpy(topic,mqtt_topic);
strcat(topic,will_Topic);
if (client.connect(gateway_name, mqtt_user, mqtt_pass, topic, will_QoS, will_Retain, will_Message))
{
#if defined(ZboardM5STICKC) || defined(ZboardM5STACK)
if (low_power_mode < 2)
M5Display("MQTT connected", "", "");
#endif
Log.notice(F("Connected to broker" CR));
failure_number_mqtt = 0;
// Once connected, publish an announcement...
pub(will_Topic, Gateway_AnnouncementMsg, will_Retain);
// publish version
pub(version_Topic, OMG_VERSION, will_Retain);
//Subscribing to topic
char topic2[mqtt_topic_max_size];
strcpy(topic2,mqtt_topic);
strcat(topic2,subjectMQTTtoX);
if (client.subscribe(topic2))
{
#ifdef ZgatewayRF
client.subscribe(subjectMultiGTWRF); // subject on which other OMG will publish, this OMG will store these msg and by the way don't republish them if they have been already published
#endif
#ifdef ZgatewayIR
client.subscribe(subjectMultiGTWIR); // subject on which other OMG will publish, this OMG will store these msg and by the way don't republish them if they have been already published
#endif
Log.trace(F("Subscription OK to the subjects" CR));
}
}
else
{
failure_number_mqtt++; // we count the failure
Log.warning(F("failure_number_mqtt: %d" CR), failure_number_mqtt);
Log.warning(F("failed, rc=%d" CR), client.state());
delay(5000);
#if defined(ESP8266) || defined(ESP32)
disconnection_handling(failure_number_mqtt);
#endif
}
}
// Callback function, when the gateway receive an MQTT value on the topics subscribed this function is called
void callback(char *topic, byte *payload, unsigned int length)
{
// In order to republish this payload, a copy must be made
// as the orignal payload buffer will be overwritten whilst
// constructing the PUBLISH packet.
Log.trace(F("Hey I got a callback " CR));
// Allocate the correct amount of memory for the payload copy
byte *p = (byte *)malloc(length + 1);
// Copy the payload to the new buffer
memcpy(p, payload, length);
// Conversion to a printable string
p[length] = '\0';
//launch the function to treat received data if this data concern OpenMQTTGateway
if ((strstr(topic, subjectMultiGTWKey) != NULL) || (strstr(topic, subjectGTWSendKey) != NULL))
receivingMQTT(topic, (char *)p);
// Free the memory
free(p);
}
void setup_parameters()
{
strcat(mqtt_topic, gateway_name);
}
void setup()
{
//Launch serial for debugging purposes
Serial.begin(SERIAL_BAUD);
Log.begin(LOG_LEVEL, &Serial);
Log.notice(F(CR "************* WELCOME TO OpenMQTTGateway **************" CR));
#if defined(ESP8266) || defined(ESP32)
#ifdef ESP8266
#ifndef ZgatewaySRFB // if we are not in sonoff rf bridge case we apply the ESP8266 pin optimization
Serial.end();
Serial.begin(SERIAL_BAUD, SERIAL_8N1, SERIAL_TX_ONLY); // enable on ESP8266 to free some pin
#endif
#elif ESP32
preferences.begin(Gateway_Short_Name, false);
low_power_mode = preferences.getUInt("low_power_mode", DEFAULT_LOW_POWER_MODE);
preferences.end();
#if defined(ZboardM5STICKC) || defined(ZboardM5STACK)
setupM5();
#endif
#endif
Log.trace(F("OpenMQTTGateway Wifi protocol used: %d" CR), wifiProtocol);
#if defined(ESPWifiManualSetup)
setup_wifi();
#else
setup_wifimanager(false);
#endif
Log.trace(F("OpenMQTTGateway mac: %s" CR),WiFi.macAddress().c_str());
Log.trace(F("OpenMQTTGateway ip: %s" CR),WiFi.localIP().toString().c_str());
setOTA();
#else // In case of arduino platform
//Launch serial for debugging purposes
Serial.begin(SERIAL_BAUD);
//Begining ethernet connection in case of Arduino + W5100
setup_ethernet();
#endif
//setup LED status
pinMode(led_receive, OUTPUT);
pinMode(led_send, OUTPUT);
pinMode(led_info, OUTPUT);
digitalWrite(led_receive, LOW);
digitalWrite(led_send, LOW);
digitalWrite(led_info, LOW);
#if defined(MDNS_SD) && defined(ESP8266)
Log.trace(F("Connecting to MQTT by mDNS without mqtt hostname" CR));
connectMQTTmdns();
#else
long port;
port = strtol(mqtt_port, NULL, 10);
Log.trace(F("Port: %l" CR),port);
#ifdef mqtt_server_name // if name is defined we define the mqtt server by its name
IPAddress mqtt_server_ip;
WiFi.hostByName(mqtt_server_name, mqtt_server_ip);
client.setServer(mqtt_server_ip, port);
Log.trace(F("Mqtt server connection by host name: %s" CR),mqtt_server_ip.toString());
#else // if not by its IP adress
client.setServer(mqtt_server, port);
Log.trace(F("Mqtt server connection by IP: %s" CR),mqtt_server);
#endif
#endif
setup_parameters();
client.setCallback(callback);
delay(1500);
lastMQTTReconnectAttempt = 0;
#ifdef ZsensorBME280
setupZsensorBME280();
#endif
#ifdef ZsensorHTU21
setupZsensorHTU21();
#endif
#ifdef ZsensorBH1750
setupZsensorBH1750();
#endif
#ifdef ZsensorTSL2561
setupZsensorTSL2561();
#endif
#ifdef Zgateway2G
setup2G();
#endif
#ifdef ZgatewayIR
setupIR();
#endif
#ifdef ZgatewayLORA
setupLORA();
#endif
#ifdef ZgatewayRF
setupRF();
#endif
#ifdef ZgatewayRF2
setupRF2();
#endif
#ifdef ZgatewayPilight
setupPilight();
#endif
#ifdef ZgatewayWeatherStation
setupWeatherStation();
#endif
#ifdef ZgatewaySRFB
setupSRFB();
#endif
#ifdef ZgatewayBT
setupBT();
#endif
#ifdef ZgatewayRFM69
setupRFM69();
#endif
#ifdef ZsensorINA226
setupINA226();
#endif
#ifdef ZsensorHCSR501
setupHCSR501();
#endif
#ifdef ZsensorHCSR04
setupHCSR04();
#endif
#ifdef ZsensorGPIOInput
setupGPIOInput();
#endif
#ifdef ZsensorGPIOKeyCode
setupGPIOKeyCode();
#endif
#ifdef ZactuatorFASTLED
setupFASTLED();
#endif
#ifdef ZsensorDS1820
setupZsensorDS1820();
#endif
#ifdef ZsensorADC
setupADC();
#endif
#ifdef ZsensorDHT
setupDHT();
#endif
Log.trace(F("MQTT_MAX_PACKET_SIZE: %d" CR),MQTT_MAX_PACKET_SIZE);
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
if (MQTT_MAX_PACKET_SIZE == 128)
Log.error(F("WRONG PUBSUBCLIENT LIBRARY USED PLEASE INSTALL THE ONE FROM RELEASE PAGE" CR));
#endif
Log.notice(F("Setup OpenMQTTGateway end" CR));
}
#if defined(ESP8266) || defined(ESP32)
// Bypass for ESP not reconnecting automaticaly the second time https://github.com/espressif/arduino-esp32/issues/2501
bool wifi_reconnect_bypass(){
uint8_t wifi_autoreconnect_cnt = 0;
#ifdef ESP32
while (WiFi.status() != WL_CONNECTED && wifi_autoreconnect_cnt < maxConnectionRetryWifi) {
#else
while (WiFi.waitForConnectResult() != WL_CONNECTED && wifi_autoreconnect_cnt < maxConnectionRetryWifi) {
#endif
Log.notice(F("Attempting Wifi connection with saved AP: %d" CR), wifi_autoreconnect_cnt);
WiFi.begin();
delay(500);
wifi_autoreconnect_cnt++;
}
if(wifi_autoreconnect_cnt < maxConnectionRetryWifi)
{
return true;
} else {
return false;
}
}
// the 2 methods below are used to recover wifi connection by changing the protocols
void forceWifiProtocol(){
#ifdef ESP32
Log.warning(F("ESP32: Forcing to wifi %d" CR), wifiProtocol);
esp_wifi_set_protocol(WIFI_IF_STA, wifiProtocol);
#elif ESP8266
Log.warning(F("ESP8266: Forcing to wifi %d" CR), wifiProtocol);
WiFi.setPhyMode((WiFiPhyMode_t)wifiProtocol);
#endif
}
void reinit_wifi()
{
delay(10);
WiFi.mode(WIFI_STA);
if (!wifiProtocol) forceWifiProtocol();
WiFi.begin();
}
void disconnection_handling( int failure_number){
Log.warning(F("disconnection_handling, failed %d times" CR), failure_number);
if (failure_number > maxConnectionRetry && !connectedOnce)
{
#ifndef ESPWifiManualSetup
Log.error(F("Failed connecting 1st time to mqtt, reset wifi manager & erase network credentials" CR));
setup_wifimanager(true);
#endif
}
else if (failure_number <= maxConnectionRetry + ATTEMPTS_BEFORE_BG && connectedOnce)
{
Log.warning(F("Attempt to reinit wifi: %d" CR), wifiProtocol);
reinit_wifi();
}
else if (failure_number > maxConnectionRetry + ATTEMPTS_BEFORE_BG && failure_number <= maxConnectionRetry + ATTEMPTS_BEFORE_B ) // After maxConnectionRetry + ATTEMPTS_BEFORE_BG try to connect with BG protocol
{
#ifdef ESP32
wifiProtocol = WIFI_PROTOCOL_11B | WIFI_PROTOCOL_11G;
#elif ESP8266
wifiProtocol = WIFI_PHY_MODE_11G;
#endif
Log.warning(F("Wifi Protocol changed to WIFI_11G: %d" CR), wifiProtocol);
reinit_wifi();
}
else if (failure_number > maxConnectionRetry + ATTEMPTS_BEFORE_B && failure_number <= maxConnectionRetry + ATTEMPTS_BEFORE_B + ATTEMPTS_BEFORE_BG ) // After maxConnectionRetry + ATTEMPTS_BEFORE_B try to connect with B protocol
{
#ifdef ESP32
wifiProtocol = WIFI_PROTOCOL_11B;
#elif ESP8266
wifiProtocol = WIFI_PHY_MODE_11B;
#endif
Log.warning(F("Wifi Protocol changed to WIFI_11B: %d" CR), wifiProtocol);
reinit_wifi();
}
else if (failure_number > maxConnectionRetry + ATTEMPTS_BEFORE_B + ATTEMPTS_BEFORE_BG ) // After maxConnectionRetry + ATTEMPTS_BEFORE_B try to connect with B protocol
{
#ifdef ESP32
wifiProtocol = 0;
#elif ESP8266
wifiProtocol = 0;
#endif
Log.warning(F("Wifi Protocol reverted to normal mode: %d" CR), wifiProtocol);
reinit_wifi();
}
}
void setOTA(){
// Port defaults to 8266
ArduinoOTA.setPort(ota_port);
// Hostname defaults to esp8266-[ChipID]
ArduinoOTA.setHostname(ota_hostname);
// No authentication by default
ArduinoOTA.setPassword(ota_password);
ArduinoOTA.onStart([]() {
Log.trace(F("Start OTA" CR));
});
ArduinoOTA.onEnd([]() {
Log.trace(F("\nEnd OTA" CR));
});
ArduinoOTA.onProgress([](unsigned int progress, unsigned int total) {
Log.trace(F("Progress: %u%%\r" CR), (progress / (total / 100)));
});
ArduinoOTA.onError([](ota_error_t error) {
Serial.printf("Error[%u]: ", error);
if (error == OTA_AUTH_ERROR)
Log.error(F("Auth Failed" CR));
else if (error == OTA_BEGIN_ERROR)
Log.error(F("Begin Failed" CR));
else if (error == OTA_CONNECT_ERROR)
Log.error(F("Connect Failed" CR));
else if (error == OTA_RECEIVE_ERROR)
Log.error(F("Receive Failed" CR));
else if (error == OTA_END_ERROR)
Log.error(F("End Failed" CR));
});
ArduinoOTA.begin();
}
#endif
#if defined(ESPWifiManualSetup)
void setup_wifi()
{
delay(10);
WiFi.mode(WIFI_STA);
if (!wifiProtocol) forceWifiProtocol();
// We start by connecting to a WiFi network
Log.trace(F("Connecting to %s" CR), wifi_ssid);
#ifdef ESPWifiAdvancedSetup
IPAddress ip_adress(ip);
IPAddress gateway_adress(gateway);
IPAddress subnet_adress(subnet);
IPAddress dns_adress(Dns);
if (!WiFi.config(ip_adress, gateway_adress, subnet_adress, dns_adress))
{
Log.error(F("Wifi STA Failed to configure" CR));
}
WiFi.begin(wifi_ssid, wifi_password);
#else
WiFi.begin(wifi_ssid, wifi_password);
#endif
if(wifi_reconnect_bypass());
Log.notice(F("Connected with saved credentials" CR));
while (WiFi.status() != WL_CONNECTED)
{
delay(500);
Log.trace(F("." CR));
failure_number_ntwk++;
disconnection_handling(failure_number_ntwk);
}
Log.notice(F("WiFi ok with manual config credentials" CR));
}
#elif defined(ESP8266) || defined(ESP32)
WiFiManager wifiManager;
//flag for saving data
bool shouldSaveConfig = true;
//do we have been connected once to mqtt
//callback notifying us of the need to save config
void saveConfigCallback()
{
Log.trace(F("Should save config" CR));
shouldSaveConfig = true;
}
void checkButton()
{ // code from tzapu/wifimanager examples
// check for button press
if (digitalRead(TRIGGER_PIN) == LOW)
{
// poor mans debounce/press-hold, code not ideal for production
delay(50);
if (digitalRead(TRIGGER_PIN) == LOW)
{
Log.trace(F("Trigger button Pressed" CR));
// still holding button for 3000 ms, reset settings, code not ideaa for production
delay(3000); // reset delay hold
if (digitalRead(TRIGGER_PIN) == LOW)
{
Log.trace(F("Button Held" CR));
Log.notice(F("Erasing ESP Config, restarting" CR));
setup_wifimanager(true);
}
}
}
}
void eraseAndRestart()
{
#if defined(ESP8266)
WiFi.disconnect(true);
#else
WiFi.disconnect(true, true);
#endif
Log.trace(F("Formatting requested, result: %d" CR), SPIFFS.format());
#if defined(ESP8266)
ESP.eraseConfig();
delay(5000);
ESP.reset();
#else
ESP.restart();
#endif
}
void setup_wifimanager(bool reset_settings)
{
pinMode(TRIGGER_PIN, INPUT_PULLUP);
delay(10);
WiFi.mode(WIFI_STA);
if (!wifiProtocol) forceWifiProtocol();
if (reset_settings)
eraseAndRestart();
//read configuration from FS json
Log.trace(F("mounting FS..." CR));
if (SPIFFS.begin())
{
Log.trace(F("mounted file system" CR));
}
else
{
Log.warning(F("failed to mount FS -> formating" CR));
SPIFFS.format();
if (SPIFFS.begin())
Log.trace(F("mounted file system after formating" CR));
}
if (SPIFFS.exists("/config.json"))
{
//file exists, reading and loading
Log.trace(F("reading config file" CR));
File configFile = SPIFFS.open("/config.json", "r");
if (configFile)
{
Log.trace(F("opened config file" CR));
size_t size = configFile.size();
// Allocate a buffer to store contents of the file.
std::unique_ptr<char[]> buf(new char[size]);
configFile.readBytes(buf.get(), size);
DynamicJsonBuffer jsonBuffer;
JsonObject &json = jsonBuffer.parseObject(buf.get());
json.printTo(Serial);
if (json.success())
{
Log.trace(F("\nparsed json" CR));
if (json.containsKey("mqtt_server"))
strcpy(mqtt_server, json["mqtt_server"]);
if (json.containsKey("mqtt_port"))
strcpy(mqtt_port, json["mqtt_port"]);
if (json.containsKey("mqtt_user"))
strcpy(mqtt_user, json["mqtt_user"]);
if (json.containsKey("mqtt_pass"))
strcpy(mqtt_pass, json["mqtt_pass"]);
if (json.containsKey("mqtt_topic"))
strcpy(mqtt_topic, json["mqtt_topic"]);
if (json.containsKey("gateway_name"))
strcpy(gateway_name, json["gateway_name"]);
}
else
{
Log.warning(F("failed to load json config" CR));
}
}
}
// The extra parameters to be configured (can be either global or just in the setup)
// After connecting, parameter.getValue() will get you the configured value
// id/name placeholder/prompt default length
WiFiManagerParameter custom_mqtt_server("server", "mqtt server", mqtt_server, parameters_size);
WiFiManagerParameter custom_mqtt_port("port", "mqtt port", mqtt_port, 6);
WiFiManagerParameter custom_mqtt_user("user", "mqtt user", mqtt_user, parameters_size);
WiFiManagerParameter custom_mqtt_pass("pass", "mqtt pass", mqtt_pass, parameters_size);
WiFiManagerParameter custom_mqtt_topic("topic", "mqtt base topic", mqtt_topic, mqtt_topic_max_size);
WiFiManagerParameter custom_gateway_name("name", "gateway name", gateway_name, parameters_size * 2);
//WiFiManager
//Local intialization. Once its business is done, there is no need to keep it around
wifiManager.setConnectTimeout(WifiManager_TimeOut);
//Set timeout before going to portal
wifiManager.setConfigPortalTimeout(WifiManager_ConfigPortalTimeOut);
//set config save notify callback
wifiManager.setSaveConfigCallback(saveConfigCallback);
//set static ip
#ifdef NetworkAdvancedSetup
Log.trace(F("Adv wifi cfg" CR));
IPAddress gateway_adress(gateway);
IPAddress subnet_adress(subnet);
IPAddress ip_adress(ip);
wifiManager.setSTAStaticIPConfig(ip_adress, gateway_adress,subnet_adress);
#endif
//add all your parameters here
wifiManager.addParameter(&custom_mqtt_server);
wifiManager.addParameter(&custom_mqtt_port);
wifiManager.addParameter(&custom_mqtt_user);
wifiManager.addParameter(&custom_mqtt_pass);
wifiManager.addParameter(&custom_gateway_name);
wifiManager.addParameter(&custom_mqtt_topic);
//set minimum quality of signal so it ignores AP's under that quality
wifiManager.setMinimumSignalQuality(MinimumWifiSignalQuality);
if(!wifi_reconnect_bypass())// if we didn't connect with saved credential we start Wifimanager web portal
{
#ifdef ESP32
if (low_power_mode < 2)
{
#if defined(ZboardM5STICKC) || defined(ZboardM5STACK)
M5Display("Connect your phone to WIFI AP:", WifiManager_ssid, WifiManager_password);
#endif
} else { // in case of low power mode we put the ESP to sleep again if we didn't get connected (typical in case the wifi is down)
#ifdef ZgatewayBT
lowPowerESP32();
#endif
}
#endif
Log.notice(F("Connect your phone to WIFI AP: %s with PWD: %s" CR), WifiManager_ssid, WifiManager_password );
//fetches ssid and pass and tries to connect
//if it does not connect it starts an access point with the specified name
//and goes into a blocking loop awaiting configuration
if (!wifiManager.autoConnect(WifiManager_ssid, WifiManager_password))
{
Log.warning(F("failed to connect and hit timeout" CR));
delay(3000);
//reset and try again
#if defined(ESP8266)
ESP.reset();
#else
ESP.restart();
#endif
delay(5000);
}
}
#if defined(ZboardM5STICKC) || defined(ZboardM5STACK)
if (low_power_mode < 2)
M5Display("Wifi connected", "", "");
#endif
//read updated parameters
strcpy(mqtt_server, custom_mqtt_server.getValue());
strcpy(mqtt_port, custom_mqtt_port.getValue());
strcpy(mqtt_user, custom_mqtt_user.getValue());
strcpy(mqtt_pass, custom_mqtt_pass.getValue());
strcpy(mqtt_topic, custom_mqtt_topic.getValue());
strcpy(gateway_name, custom_gateway_name.getValue());
//save the custom parameters to FS
if (shouldSaveConfig)
{
Log.trace(F("saving config" CR));
DynamicJsonBuffer jsonBuffer;
JsonObject &json = jsonBuffer.createObject();
json["mqtt_server"] = mqtt_server;
json["mqtt_port"] = mqtt_port;
json["mqtt_user"] = mqtt_user;
json["mqtt_pass"] = mqtt_pass;
json["mqtt_topic"] = mqtt_topic;
json["gateway_name"] = gateway_name;
File configFile = SPIFFS.open("/config.json", "w");
if (!configFile)
{
Log.error(F("failed to open config file for writing" CR));
}
json.printTo(Serial);
json.printTo(configFile);
configFile.close();
//end save
}
}
#else // Arduino case
void setup_ethernet()
{
#ifdef NetworkAdvancedSetup
Log.trace(F("Adv eth cfg" CR));
Ethernet.begin(mac, ip, Dns, gateway, subnet);
#else
Log.trace(F("Spl eth cfg" CR));
Ethernet.begin(mac, ip);
#endif
if (Ethernet.hardwareStatus() == EthernetNoHardware)
{
Log.error(F("Ethernet shield was not found." CR));
}
else
{
Log.trace(F("ip: %s " CR),Ethernet.localIP());
}
}
#endif
#if defined(MDNS_SD) && defined(ESP8266)
void connectMQTTmdns()
{
if (!MDNS.begin("ESP_MQTT"))
{
Log.error(F("Error setting up MDNS responder!" CR));
while (1)
{
delay(1000);
}
}
Log.trace(F("Browsing for MQTT service" CR));
int n = MDNS.queryService("mqtt", "tcp");
if (n == 0)
{
Log.error(F("no services found" CR));
}
else
{
Log.trace(F("%d service(s) found" CR),n);
for (int i = 0; i < n; ++i)
{
Log.trace(F("Service %d %s found" CR),i, MDNS.hostname(i).c_str());
Log.trace(F("IP %s Port %d" CR),MDNS.IP(i).toString().c_str(), MDNS.port(i));
}
if (n == 1)
{
Log.trace(F("One MQTT server found setting parameters" CR));
client.setServer(MDNS.IP(0), int(MDNS.port(0)));
}
else
{
Log.error(F("Several MQTT servers found, please deactivate mDNS and set your default server" CR));
}
}
}
#endif
void loop()
{
#ifndef ESPWifiManualSetup
#if defined(ESP8266) || defined(ESP32)
checkButton(); // check if a reset of wifi/mqtt settings is asked
#endif
#endif
digitalWrite(led_receive, LOW);
digitalWrite(led_info, LOW);
digitalWrite(led_send, LOW);
unsigned long now = millis();
#if defined(ESP8266) || defined(ESP32)
if (WiFi.status() == WL_CONNECTED)
{
#else
if ((Ethernet.hardwareStatus() != EthernetW5100 && Ethernet.linkStatus() == LinkON) || (Ethernet.hardwareStatus() == EthernetW5100))
{ //we are able to detect disconnection only on w5200 and w5500
#endif
failure_number_ntwk = 0;
if (client.connected())
{
#ifdef ZmqttDiscovery
if(!connectedOnce) pubMqttDiscovery(); // at first connection we publish the discovery payloads
#endif
connectedOnce = true;
failure_number_ntwk = 0;
client.loop();
#if defined(ESP8266) || defined(ESP32)
ArduinoOTA.handle();
#endif
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
if (now > (timer_sys_measures + (TimeBetweenReadingSYS * 1000)) || !timer_sys_measures)
{
timer_sys_measures = millis();
stateMeasures();
}
#endif
#ifdef ZsensorBME280
MeasureTempHumAndPressure(); //Addon to measure Temperature, Humidity, Pressure and Altitude with a Bosch BME280
#endif
#ifdef ZsensorHTU21
MeasureTempHum(); //Addon to measure Temperature, Humidity, of a HTU21 sensor
#endif
#ifdef ZsensorHCSR04
MeasureDistance(); //Addon to measure distance with a HC-SR04
#endif
#ifdef ZsensorBH1750
MeasureLightIntensity(); //Addon to measure Light Intensity with a BH1750
#endif
#ifdef ZsensorTSL2561
MeasureLightIntensityTSL2561();
#endif
#ifdef ZsensorDHT
MeasureTempAndHum(); //Addon to measure the temperature with a DHT
#endif
#ifdef ZsensorDS1820
MeasureDS1820Temp(); //Addon to measure the temperature with DS1820 sensor(s)
#endif
#ifdef ZsensorINA226
MeasureINA226();
#endif
#ifdef ZsensorHCSR501
MeasureHCSR501();
#endif
#ifdef ZsensorGPIOInput
MeasureGPIOInput();
#endif
#ifdef ZsensorGPIOKeyCode
MeasureGPIOKeyCode();
#endif
#ifdef ZsensorADC
MeasureADC(); //Addon to measure the analog value of analog pin
#endif
#ifdef ZgatewayLORA
LORAtoMQTT();
#endif
#ifdef ZgatewayRF
RFtoMQTT();
#endif
#ifdef ZgatewayRF2
RF2toMQTT();
#endif
#ifdef ZgatewayWeatherStation
ZgatewayWeatherStationtoMQTT();
#endif
#ifdef ZgatewayPilight
PilighttoMQTT();
#endif
#ifdef ZgatewayBT
#ifndef ESP32
if (BTtoMQTT())
Log.trace(F("BTtoMQTT OK" CR));
#endif
#endif
#ifdef ZgatewaySRFB
SRFBtoMQTT();
#endif
#ifdef ZgatewayIR
IRtoMQTT();
#endif
#ifdef Zgateway2G
if (_2GtoMQTT())
Log.trace(F("2GtoMQTT OK" CR));
#endif
#ifdef ZgatewayRFM69
if (RFM69toMQTT())
Log.trace(F("RFM69toMQTT OK" CR));
#endif
#ifdef ZactuatorFASTLED
FASTLEDLoop();
#endif
}
else
{
connectMQTT();
}
}
else
{ // disconnected from network
#if defined(ESP8266) || defined(ESP32)
Log.warning(F("wifi disconnected" CR));
delay(10000); // add a delay to avoid ESP32 crash and reset
failure_number_ntwk++;
disconnection_handling(failure_number_ntwk);
#else
Log.warning(F("eth disconnected" CR));
#endif
}
// Function that doesn't need an active connection
#if defined(ZboardM5STICKC) || defined(ZboardM5STACK)
loopM5();
#endif
}
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
void stateMeasures()
{
StaticJsonBuffer<JSON_MSG_BUFFER> jsonBuffer;
JsonObject &SYSdata = jsonBuffer.createObject();
unsigned long uptime = millis() / 1000;
SYSdata["uptime"] = uptime;
SYSdata["version"] = OMG_VERSION;
Log.trace(F("retriving value of system characteristics Uptime (s):%u" CR),uptime);
#if defined(ESP8266) || defined(ESP32)
uint32_t freeMem;
freeMem = ESP.getFreeHeap();
SYSdata["freemem"] = freeMem;
long rssi = WiFi.RSSI();
SYSdata["rssi"] = rssi;
String SSID = WiFi.SSID();
SYSdata["SSID"] = SSID;
SYSdata["ip"] = ip2CharArray(WiFi.localIP());
String mac = WiFi.macAddress();
SYSdata["mac"] = (char *)mac.c_str();
SYSdata["wifiprt"] = (int)wifiProtocol;
#else
SYSdata["ip"] = ip2CharArray(Ethernet.localIP());
#endif
String modules = "";
#ifdef ZgatewayRF
modules = modules + ZgatewayRF;
#endif
#ifdef ZsensorBME280
modules = modules + ZsensorBME280;
#endif
#ifdef ZsensorHTU21
modules = modules + ZsensorHTU21;
#endif
#ifdef ZsensorHCSR04
modules = modules + ZsensorHCSR04;
#endif
#ifdef ZsensorBH1750
modules = modules + ZsensorBH1750;
#endif
#ifdef ZsensorTSL2561
modules = modules + ZsensorTSL2561;
#endif
#ifdef ZsensorDHT
modules = modules + ZsensorDHT;
#endif
#ifdef ZsensorDS1820
modules = modules + ZsensorDS1820;
#endif
#ifdef ZactuatorONOFF
modules = modules + ZactuatorONOFF;
#endif
#ifdef Zgateway2G
modules = modules + Zgateway2G;
#endif
#ifdef ZgatewayIR
modules = modules + ZgatewayIR;
#endif
#ifdef ZgatewayLORA
modules = modules + ZgatewayLORA;
#endif
#ifdef ZgatewayRF2
modules = modules + ZgatewayRF2;
#endif
#ifdef ZgatewayWeatherStation
modules = modules + ZgatewayWeatherStation;
#endif
#ifdef ZgatewayPilight
modules = modules + ZgatewayPilight;
#endif
#ifdef ZgatewaySRFB
modules = modules + ZgatewaySRFB;
#endif
#ifdef ZgatewayBT
modules = modules + ZgatewayBT;
#ifdef ESP32
SYSdata["lowpowermode"] = (int)low_power_mode;
#endif
#endif
#ifdef ZgatewayRFM69
modules = modules + ZgatewayRFM69;
#endif
#ifdef ZsensorINA226
modules = modules + ZsensorINA226;
#endif
#ifdef ZsensorHCSR501
modules = modules + ZsensorHCSR501;
#endif
#ifdef ZsensorGPIOInput
modules = modules + ZsensorGPIOInput;
#endif
#ifdef ZsensorGPIOKeyCode
modules = modules + ZsensorGPIOKeyCode;
#endif
#ifdef ZsensorGPIOKeyCode
modules = modules + ZsensorGPIOKeyCode;
#endif
#ifdef ZmqttDiscovery
modules = modules + ZmqttDiscovery;
#endif
#ifdef ZactuatorFASTLED
modules = modules + ZactuatorFASTLED;
#endif
#ifdef ZboardM5STACK
M5.Power.begin();
SYSdata["m5-batt-level"] = (int8_t)M5.Power.getBatteryLevel();
SYSdata["m5-is-charging"] = (bool)M5.Power.isCharging();
SYSdata["m5-is-chargefull"] = (bool)M5.Power.isChargeFull();
#endif
#ifdef ZboardM5STICKC
M5.Axp.EnableCoulombcounter();
SYSdata["m5-bat-voltage"] = (float)M5.Axp.GetBatVoltage();
SYSdata["m5-bat-current"] = (float)M5.Axp.GetBatCurrent();
SYSdata["m5-vin-voltage"] = (float)M5.Axp.GetVinVoltage();
SYSdata["m5-vin-current"] = (float)M5.Axp.GetVinCurrent();
SYSdata["m5-vbus-voltage"] = (float)M5.Axp.GetVBusVoltage();
SYSdata["m5-vbus-current"] = (float)M5.Axp.GetVBusCurrent();
SYSdata["m5-temp-axp"] = (float)M5.Axp.GetTempInAXP192();
SYSdata["m5-bat-power"] = (float)M5.Axp.GetBatPower();
SYSdata["m5-bat-chargecurrent"] = (float)M5.Axp.GetBatChargeCurrent();
SYSdata["m5-aps-voltage"] = (float)M5.Axp.GetAPSVoltage();
#endif
SYSdata["modules"] = modules;
pub(subjectSYStoMQTT, SYSdata);
}
#endif
void storeValue(unsigned long MQTTvalue)
{
unsigned long now = millis();
// find oldest value of the buffer
int o = getMin();
Log.trace(F("Min ind: %d" CR),o);
// replace it by the new one
ReceivedSignal[o][0] = MQTTvalue;
ReceivedSignal[o][1] = now;
Log.trace(F("store code : %u / %u" CR),ReceivedSignal[o][0],ReceivedSignal[o][1]);
Log.trace(F("Col: val/timestamp" CR));
for (int i = 0; i < array_size; i++)
{
Log.trace(F("mem code : %u / %u" CR),ReceivedSignal[i][0],ReceivedSignal[i][1]);
}
}
int getMin()
{
unsigned int minimum = ReceivedSignal[0][1];
int minindex = 0;
for (int i = 0; i < array_size; i++)
{
if (ReceivedSignal[i][1] < minimum)
{
minimum = ReceivedSignal[i][1];
minindex = i;
}
}
return minindex;
}
bool isAduplicate(unsigned long value)
{
Log.trace(F("isAdupl?" CR));
// check if the value has been already sent during the last time_avoid_duplicate
for (int i = 0; i < array_size; i++)
{
if (ReceivedSignal[i][0] == value)
{
unsigned long now = millis();
if (now - ReceivedSignal[i][1] < time_avoid_duplicate)
{ // change
Log.notice(F("no pub. dupl" CR));
return true;
}
}
}
return false;
}
void receivingMQTT(char *topicOri, char *datacallback)
{
StaticJsonBuffer<JSON_MSG_BUFFER> jsonBuffer;
JsonObject &jsondata = jsonBuffer.parseObject(datacallback);
if (strstr(topicOri, subjectMultiGTWKey) != NULL) // storing received value so as to avoid publishing this value if it has been already sent by this or another OpenMQTTGateway
{
unsigned long data = 0;
#ifdef jsonPublishing
if (jsondata.success())
data = jsondata["value"];
#endif
#ifdef simplePublishing
data = strtoul(datacallback, NULL, 10); // we will not be able to pass values > 4294967295
#endif
if (data != 0)
{
storeValue(data);
}
}
if (jsondata.success())
{ // json object ok -> json decoding
// log the received json
logJson(jsondata);
#ifdef ZgatewayPilight // ZgatewayPilight is only defined with json publishing due to its numerous parameters
MQTTtoPilight(topicOri, jsondata);
#endif
#ifdef jsonReceiving
#ifdef ZgatewayLORA
MQTTtoLORA(topicOri, jsondata);
#endif
#ifdef ZgatewayRF
MQTTtoRF(topicOri, jsondata);
#endif
#ifdef ZgatewayRF2
MQTTtoRF2(topicOri, jsondata);
#endif
#ifdef Zgateway2G
MQTTto2G(topicOri, jsondata);
#endif
#ifdef ZgatewaySRFB
MQTTtoSRFB(topicOri, jsondata);
#endif
#ifdef ZgatewayIR
MQTTtoIR(topicOri, jsondata);
#endif
#ifdef ZgatewayRFM69
MQTTtoRFM69(topicOri, jsondata);
#endif
#ifdef ZgatewayBT
MQTTtoBT(topicOri, jsondata);
#endif
#ifdef ZactuatorFASTLED
MQTTtoFASTLED(topicOri, jsondata);
#endif
#if defined(ZboardM5STICKC) || defined(ZboardM5STACK)
MQTTtoM5(topicOri, jsondata);
#endif
#endif
#ifdef ZactuatorONOFF // outside the jsonpublishing macro due to the fact that we need to use simplepublishing with HA discovery
MQTTtoONOFF(topicOri, jsondata);
#endif
digitalWrite(led_send, HIGH);
MQTTtoSYS(topicOri, jsondata);
}
else
{ // not a json object --> simple decoding
#ifdef simpleReceiving
#ifdef ZgatewayLORA
MQTTtoLORA(topicOri, datacallback);
#endif
#ifdef ZgatewayRF
MQTTtoRF(topicOri, datacallback);
#endif
#ifdef ZgatewayRF315
MQTTtoRF315(topicOri, datacallback);
#endif
#ifdef ZgatewayRF2
MQTTtoRF2(topicOri, datacallback);
#endif
#ifdef Zgateway2G
MQTTto2G(topicOri, datacallback);
#endif
#ifdef ZgatewaySRFB
MQTTtoSRFB(topicOri, datacallback);
#endif
#ifdef ZgatewayRFM69
MQTTtoRFM69(topicOri, datacallback);
#endif
#ifdef ZactuatorFASTLED
MQTTtoFASTLED(topicOri, datacallback);
#endif
#endif
#ifdef ZactuatorONOFF
MQTTtoONOFF(topicOri, datacallback);
#endif
digitalWrite(led_send, HIGH);
}
//YELLOW OFF
digitalWrite(led_send, HIGH);
}
void MQTTtoSYS(char *topicOri, JsonObject &SYSdata)
{ // json object decoding
if (cmpToMainTopic(topicOri,subjectMQTTtoSYSset))
{
Log.trace(F("MQTTtoSYS json" CR));
#if defined(ESP8266) || defined(ESP32)
if (SYSdata.containsKey("cmd"))
{
const char *cmd = SYSdata["cmd"];
Log.notice(F("Command: %s" CR),cmd);
if (strstr(cmd, restartCmd) != NULL)
{ //restart
#if defined(ESP8266)
ESP.reset();
#else
ESP.restart();
#endif
}
else if (strstr(cmd, eraseCmd) != NULL)
{ //erase and restart
#ifndef ESPWifiManualSetup
setup_wifimanager(true);
#endif
}
else
{
Log.warning(F("wrong command" CR));
}
}
#endif
}
}
Reference in new issue View Git Blame Copy Permalink