111 lines
4.7 KiB
C
111 lines
4.7 KiB
C
/*
|
|
OpenMQTTGateway - ESP8266 or Arduino program for home automation
|
|
|
|
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
|
|
Send and receiving command by MQTT
|
|
|
|
This program enables to:
|
|
- receive MQTT data from a topic and send RF 433Mhz signal corresponding to the received MQTT data
|
|
- publish MQTT data to a different topic related to received 433Mhz signal
|
|
- receive MQTT data from a topic and send IR signal corresponding to the received MQTT data
|
|
- publish MQTT data to a different topic related to received IR signal
|
|
|
|
Copyright: (c)1technophile
|
|
|
|
Contributors:
|
|
- crankyoldgit
|
|
- Spudtater
|
|
|
|
Permission is hereby granted, free of charge, to any person obtaining a copy of this software
|
|
and associated documentation files (the "Software"), to deal in the Software without restriction,
|
|
including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so,
|
|
subject to the following conditions:
|
|
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
|
|
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
|
|
TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
|
|
CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/*----------------------------USER PARAMETERS-----------------------------*/
|
|
/*-------------DEFINE YOUR MQTT & NETWORK PARAMETERS BELOW----------------*/
|
|
//MQTT Parameters definition
|
|
#define mqtt_server "192.168.1.17"
|
|
#define mqtt_user "your_username" // not compulsory only if your broker needs authentication
|
|
#define mqtt_password "your_password" // not compulsory only if your broker needs authentication
|
|
#define mqtt_port 1883
|
|
|
|
// Update these with values suitable for your network.
|
|
#ifdef ESP8266 // for nodemcu, weemos and esp8266
|
|
#define wifi_ssid "wifi ssid"
|
|
#define wifi_password "wifi password"
|
|
#else // for arduino + W5100
|
|
const byte mac[] = { 0xDE, 0xED, 0xBA, 0xFE, 0x54, 0x95 }; //W5100 ethernet shield mac adress
|
|
const byte ip[] = { 192, 168, 1, 95 }; //W5100 ethernet shield ip adress
|
|
#endif
|
|
|
|
//Addons management, comment the line if you don't use
|
|
//#define ZaddonDHT true
|
|
|
|
/*----------------------------OTHER PARAMETERS-----------------------------*/
|
|
/*-------------------CHANGING THEM IS NOT COMPULSORY-----------------------*/
|
|
//variables to avoid duplicates for RF
|
|
#define time_avoid_duplicate 3000 // if you want to avoid duplicate mqtt message received set this to > 0, the value is the time in milliseconds during which we don't publish duplicates
|
|
|
|
//MQTT definitions
|
|
//RF MQTT Subjects
|
|
#define GatewayName "OpenMQTTGateway"
|
|
#define GatewayAnnouncementTopic "OpenMQTTGateway connected"
|
|
#define GatewayAnnouncementMsg "hello broker!"
|
|
// global MQTT subject listened by the gateway to execute commands (send RF, IR or others)
|
|
#define subjectMQTTtoX "home/commands/#"
|
|
#define subjectAck "/ack"
|
|
|
|
//433Mhz MQTT Subjects and keys
|
|
#define subjectMQTTto433 "home/commands/MQTTto433"
|
|
#define subject433toMQTT "home/433toMQTT"
|
|
#define subject433toMQTTAdvanced "home/433toMQTTAdvanced"
|
|
#define RFprotocolKey "433_" // protocol will be defined if a subject contains RFprotocolKey followed by a value of 1 digit
|
|
#define RFpulselengthKey "PLSL_" // pulselength will be defined if a subject contains RFprotocolKey followed by a value of 3 digits
|
|
//IR MQTT Subjects
|
|
#define subjectIRtoMQTT "home/sensors/ir"
|
|
#define subjectMQTTtoIR "home/commands/MQTTtoIR"
|
|
/*
|
|
RF supported protocols
|
|
433_1
|
|
433_2
|
|
433_3
|
|
433_4
|
|
433_5
|
|
433_6
|
|
IR supported protocols
|
|
IR_NEC
|
|
IR_LG
|
|
IR_Sony
|
|
IR_DISH
|
|
IR_Sharp
|
|
IR_SAMSUNG
|
|
IR_COOLIX
|
|
IR_Whynter
|
|
*/
|
|
|
|
//IR PIN definition
|
|
#define IR_RECEIVER_PIN 2 // put 2 = D4 on nodemcu, 2 = D2 on arduino
|
|
#define RF_EMITTER_PIN 4 //put 4 = D2 on nodemcu, 4 = D4 on arduino
|
|
|
|
#ifdef ESP8266
|
|
#define IR_EMITTER_PIN 14 // 14 = D5 on nodemcu #define only usefull for ESP8266
|
|
//RF PIN definition
|
|
#define RF_RECEIVER_PIN 5 // 5 = D1 on nodemcu
|
|
#else
|
|
//IMPORTANT NOTE: On arduino UNO connect IR emitter pin to D9 , comment #define IR_USE_TIMER2 and uncomment #define IR_USE_TIMER1 on library <library>IRremote/IRremoteInt.h so as to free pin D3 for RF RECEIVER PIN
|
|
//RF PIN definition
|
|
#define RF_RECEIVER_PIN 1 // 1 = D3 on arduino
|
|
#endif
|
|
//RF number of signal repetition
|
|
#define RF_EMITTER_REPEAT 20
|
|
|
|
//Do we want to see trace for debugging purposes
|
|
#define TRACE 1 // 0= trace off 1 = trace on
|