128 lines
3.5 KiB
Arduino
128 lines
3.5 KiB
Arduino
/*
|
|
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
|
|
|
|
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
|
|
Send and receiving command by MQTT
|
|
|
|
This is the Light Meter Addon:
|
|
- Measures ambient Light Intensity in Lux (lx), Foot Candela (ftcd) and Watt/m^2 (wattsm2)
|
|
- Required Hardware Module: BH1750
|
|
|
|
Connection Schemata:
|
|
--------------------
|
|
|
|
BH1750 ------> Arduino Uno ----------> ESP8266
|
|
==============================================
|
|
Vcc ---------> 5V -------------------> Vu (5V)
|
|
GND ---------> GND ------------------> GND
|
|
SCL ---------> Pin A5 ---------------> D1
|
|
SDA ---------> Pin A4 ---------------> D2
|
|
ADD ---------> N/C (Not Connected) --> N/C (Not Connected)
|
|
|
|
Copyright: (c) Hans-Juergen Dinges
|
|
|
|
This file is part of OpenMQTTGateway.
|
|
|
|
OpenMQTTGateway is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
OpenMQTTGateway is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
#include "User_config.h"
|
|
|
|
#ifdef ZsensorBH1750
|
|
#include "math.h" // Library for trig and exponential functions
|
|
#include "Wire.h" // Library for communication with I2C / TWI devices
|
|
|
|
void setupZsensorBH1750()
|
|
{
|
|
Wire.begin();
|
|
Wire.beginTransmission(BH1750_i2c_addr);
|
|
Wire.write(0x10); // Set resolution to 1 Lux
|
|
Wire.endTransmission();
|
|
delay(300);
|
|
}
|
|
|
|
// void loop()
|
|
void MeasureLightIntensity()
|
|
{
|
|
if (millis() > (timebh1750 + TimeBetweenReadingBH1750))
|
|
{ //retriving value of Lux, FtCd and Wattsm2 from BH1750
|
|
trc(F("Creating BH1750 buffer"));
|
|
StaticJsonBuffer<JSON_MSG_BUFFER> jsonBuffer;
|
|
JsonObject &BH1750data = jsonBuffer.createObject();
|
|
|
|
timebh1750 = millis();
|
|
unsigned int i = 0;
|
|
static float persistedll;
|
|
static float persistedlf;
|
|
static float persistedlw;
|
|
unsigned int Lux;
|
|
float ftcd;
|
|
float Wattsm2;
|
|
|
|
// Check if reads failed and exit early (to try again).
|
|
Wire.requestFrom(BH1750_i2c_addr, 2);
|
|
if (Wire.available() != 2)
|
|
{
|
|
trc(F("Failed to read from LightSensor BH1750!"));
|
|
}
|
|
else
|
|
{
|
|
i = Wire.read();
|
|
i <<= 8;
|
|
i |= Wire.read();
|
|
|
|
// Calculate the Values
|
|
Lux = i / 1.2; // Convert to Lux
|
|
ftcd = Lux / 10.764;
|
|
Wattsm2 = Lux / 683.0;
|
|
|
|
// Generate Lux
|
|
if (Lux != persistedll || bh1750_always)
|
|
{
|
|
BH1750data.set("lux", (unsigned int)Lux);
|
|
}
|
|
else
|
|
{
|
|
trc(F("Same lux don't send it"));
|
|
}
|
|
|
|
// Generate FtCd
|
|
if (ftcd != persistedlf || bh1750_always)
|
|
{
|
|
BH1750data.set("ftcd", (unsigned int)ftcd);
|
|
}
|
|
else
|
|
{
|
|
trc(F("Same ftcd don't send it"));
|
|
}
|
|
|
|
// Generate Watts/m2
|
|
if (Wattsm2 != persistedlw || bh1750_always)
|
|
{
|
|
BH1750data.set("wattsm2", (unsigned int)Wattsm2);
|
|
}
|
|
else
|
|
{
|
|
trc(F("Same wattsm2 don't send it"));
|
|
}
|
|
if (BH1750data.size() > 0)
|
|
pub(subjectBH1750toMQTT, BH1750data);
|
|
}
|
|
persistedll = Lux;
|
|
persistedlf = ftcd;
|
|
persistedlw = Wattsm2;
|
|
}
|
|
}
|
|
|
|
#endif
|