Florian
7db2e93c28
* [FSK] Add Lilygo Heltec environment with FSK modulation Enable RTL_433 frequency and active receiver change with WebUI Add FSK environment for Heltec and Lilygo
82 lines
2.7 KiB
Arduino
82 lines
2.7 KiB
Arduino
/*
|
|
OpenMQTTGateway - ESP8266 or Arduino program for home automation
|
|
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
|
|
Send and receiving command by MQTT
|
|
|
|
This actor enables to:
|
|
- receive MQTT data from a topic and send Somfy RTS remote control signals corresponding to the received MQTT data
|
|
|
|
Copyright (C) 2020 Leon Kiefer
|
|
|
|
This file is part of OpenMQTTGateway.
|
|
|
|
OpenMQTTGateway is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
OpenMQTTGateway is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
#include "User_config.h"
|
|
|
|
#ifdef ZactuatorSomfy
|
|
|
|
# include <EEPROM.h>
|
|
# include <EEPROMRollingCodeStorage.h>
|
|
# include <SomfyRemote.h>
|
|
|
|
# ifdef ZradioCC1101
|
|
# include <ELECHOUSE_CC1101_SRC_DRV.h>
|
|
# endif
|
|
|
|
void setupSomfy() {
|
|
pinMode(RF_EMITTER_GPIO, OUTPUT);
|
|
digitalWrite(RF_EMITTER_GPIO, LOW);
|
|
|
|
# if defined(ESP32)
|
|
if (!EEPROM.begin(max(4, SOMFY_REMOTE_NUM * 2))) {
|
|
Log.error(F("failed to initialise EEPROM" CR));
|
|
}
|
|
# elif defined(ESP8266)
|
|
EEPROM.begin(max(4, SOMFY_REMOTE_NUM * 2));
|
|
# endif
|
|
|
|
Log.trace(F("ZactuatorSomfy setup done " CR));
|
|
}
|
|
|
|
# if jsonReceiving
|
|
void MQTTtoSomfy(char* topicOri, JsonObject& jsonData) {
|
|
if (cmpToMainTopic(topicOri, subjectMQTTtoSomfy)) {
|
|
Log.trace(F("MQTTtoSomfy json data analysis" CR));
|
|
float txFrequency = jsonData["frequency"] | RFConfig.frequency;
|
|
# ifdef ZradioCC1101 // set Receive off and Transmitt on
|
|
disableCurrentReceiver();
|
|
ELECHOUSE_cc1101.SetTx(txFrequency);
|
|
Log.notice(F("Transmit frequency: %F" CR), txFrequency);
|
|
# endif
|
|
|
|
const int remoteIndex = jsonData["remote"];
|
|
if (remoteIndex >= SOMFY_REMOTE_NUM) {
|
|
Log.warning(F("ZactuatorSomfy remote does not exist" CR));
|
|
return;
|
|
}
|
|
const String commandData = jsonData["command"];
|
|
const Command command = getSomfyCommand(commandData);
|
|
|
|
const int repeat = jsonData["repeat"] | 4;
|
|
|
|
EEPROMRollingCodeStorage rollingCodeStorage(EEPROM_ADDRESS_START + remoteIndex * 2);
|
|
SomfyRemote somfyRemote(RF_EMITTER_GPIO, somfyRemotes[remoteIndex], &rollingCodeStorage);
|
|
somfyRemote.sendCommand(command, repeat);
|
|
initCC1101();
|
|
enableActiveReceiver();
|
|
}
|
|
}
|
|
# endif
|
|
|
|
#endif
|