chriz/OpenMQTT-Gateway
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 5 Wiki Activity
Files
d4457f817afa51f009f12c778b70f7e189e08bf5
OpenMQTT-Gateway/main/ZgatewayIR.ino
T
FlorianandLeon Kiefer 6e9b170c00 [RF] handle 64 bits values (except for UNO) (#698) 
* handle 64 bits values, except for UNO
Arduino UNO is not enough powerfull to handle properly uint64_t in terms of memory so differenciate the variable type depending on the board type
With this configuration ATMega will not be able to receive with simpleReceiving 64 bits values. Of course Json will work with 64 bits values for this board.
* Simplify jsondata.success() condition
* Renamings and optimize deduplication functions
* replace 2 dimensions array by a structure so as to handle the time with an uint32_t  when using an ESP (instead of a uint64_t)
* change storeValue and isAduplicate function names
* point to the rcswitch revision with the new 40 bits protocol

Co-authored-by: Leon Kiefer <leon.k97@gmx.de>
2020-07-18 17:14:19 -05:00

1140 lines
38 KiB
Arduino
Raw Blame History

/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Send and receiving command by MQTT
This gateway enables to:
- receive MQTT data from a topic and send IR signal corresponding to the received MQTT data
- publish MQTT data to a different topic related to received IR signal
Copyright: (c)Florian ROBERT
This file is part of OpenMQTTGateway.
OpenMQTTGateway is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
OpenMQTTGateway is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "User_config.h"
#ifdef ZgatewayIR
# if defined(ESP8266) || defined(ESP32)
# include <IRrecv.h> // Needed if you want to receive IR commands.
# include <IRremoteESP8266.h>
# include <IRsend.h> // Needed if you want to send IR commands.
# include <IRutils.h>
# ifdef DumpMode // in dump mode we increase the size of the buffer to catch big codes
IRrecv irrecv(IR_RECEIVER_GPIO, 1024, 15U, true);
# else
IRrecv irrecv(IR_RECEIVER_GPIO);
# endif
IRsend irsend(IR_EMITTER_GPIO);
# else
# include <IRremote.h>
IRrecv irrecv(IR_RECEIVER_GPIO);
IRsend irsend; //connect IR emitter pin to D9 on arduino, you need to comment #define IR_USE_TIMER2 and uncomment #define IR_USE_TIMER1 on library IRremote.h so as to free pin D3 for RF RECEIVER PIN
# endif
// IR protocol bits definition for Arduino (for ESP8266 they are defined in IRRemoteESP8266.h)
# ifndef NEC_BITS
# define NEC_BITS 32U
# endif
# ifndef SAMSUNG_BITS
# define SAMSUNG_BITS 32U
# endif
# ifndef SHARP_BITS
# define SHARP_ADDRESS_BITS 5U
# define SHARP_COMMAND_BITS 8U
# define SHARP_BITS (SHARP_ADDRESS_BITS + SHARP_COMMAND_BITS + 2) // 15U
# endif
# ifndef RC5_BITS
# define RC5_RAW_BITS 14U
# define RC5_BITS RC5_RAW_BITS - 2U
# endif
# ifndef DISH_BITS
# define DISH_BITS 16U
# endif
# ifndef SONY_20_BITS
# define SONY_20_BITS 20
# endif
# ifndef SONY_12_BITS
# define SONY_12_BITS 12U
# endif
# ifndef LG_BITS
# define LG_BITS 28U
# endif
# ifndef WHYNTER_BITS
# define WHYNTER_BITS 32U
# endif
// The function below comes from IRMQTTServer.INO on IRremoteESP8266 project from @crankyoldgit
uint64_t getUInt64fromHex(char const* str) {
uint64_t result = 0;
uint16_t offset = 0;
// Skip any leading '0x' or '0X' prefix.
if (str[0] == '0' && (str[1] == 'x' || str[1] == 'X')) offset = 2;
for (; isxdigit((unsigned char)str[offset]); offset++) {
char c = str[offset];
result *= 16;
if (isdigit(c))
result += c - '0'; // '0' .. '9'
else if (isupper(c))
result += c - 'A' + 10; // 'A' .. 'F'
else
result += c - 'a' + 10; // 'a' .. 'f'
}
return result;
}
void setupIR() {
//IR init parameters
# if defined(ESP8266) || defined(ESP32)
irsend.begin();
# endif
irrecv.enableIRIn(); // Start the receiver
Log.notice(F("IR_EMITTER_GPIO: %d " CR), IR_EMITTER_GPIO);
Log.notice(F("IR_RECEIVER_GPIO: %d " CR), IR_RECEIVER_GPIO);
Log.trace(F("ZgatewayIR setup done " CR));
}
void IRtoMQTT() {
decode_results results;
if (irrecv.decode(&results)) {
Log.trace(F("Creating IR buffer" CR));
StaticJsonBuffer<JSON_MSG_BUFFER> jsonBuffer;
JsonObject& IRdata = jsonBuffer.createObject();
Log.trace(F("Rcv. IR" CR));
# ifdef ESP32
Log.trace(F("IR Task running on core :%d" CR), xPortGetCoreID());
# endif
IRdata.set("value", (SIGNAL_SIZE_UL_ULL)(results.value));
IRdata.set("protocol", (int)(results.decode_type));
IRdata.set("bits", (int)(results.bits));
# if defined(ESP8266) || defined(ESP32) //resultToHexidecimal is only available with IRremoteESP8266
String hex = resultToHexidecimal(&results);
IRdata.set("hex", (char*)hex.c_str());
IRdata.set("protocol_name", (char*)(typeToString(results.decode_type, false)).c_str());
# endif
String rawCode = "";
// Dump data
for (uint16_t i = 1; i < results.rawlen; i++) {
# if defined(ESP8266) || defined(ESP32)
if (i % 100 == 0)
yield(); // Preemptive yield every 100th entry to feed the WDT.
rawCode = rawCode + (results.rawbuf[i] * RAWTICK);
# else
rawCode = rawCode + (results.rawbuf[i] * USECPERTICK);
# endif
if (i < results.rawlen - 1)
rawCode = rawCode + ","; // ',' not needed on last one
}
//trc(rawCode);
IRdata.set("raw", rawCode);
// if needed we directly resend the raw code
# ifdef RawDirectForward
# if defined(ESP8266) || defined(ESP32)
uint16_t rawsend[results.rawlen];
for (uint16_t i = 1; i < results.rawlen; i++) {
if (i % 100 == 0)
yield(); // Preemptive yield every 100th entry to feed the WDT.
# else
unsigned int rawsend[results.rawlen];
for (int i = 1; i < results.rawlen; i++) {
# endif
rawsend[i] = results.rawbuf[i];
}
irsend.sendRaw(rawsend, results.rawlen, RawFrequency);
Log.trace(F("raw redirected" CR));
# endif
irrecv.resume(); // Receive the next value
SIGNAL_SIZE_UL_ULL MQTTvalue = IRdata.get<SIGNAL_SIZE_UL_ULL>("value");
//trc(MQTTvalue);
if ((pubIRunknownPrtcl == false && IRdata.get<int>("protocol") == -1)) { // don't publish unknown IR protocol
Log.notice(F("--no pub unknwn prt--" CR));
} else if (!isAduplicateSignal(MQTTvalue) && MQTTvalue != 0) { // conditions to avoid duplications of IR -->MQTT
Log.trace(F("Adv data IRtoMQTT" CR));
pub(subjectIRtoMQTT, IRdata);
Log.trace(F("Store val: %D" CR), MQTTvalue);
storeSignalValue(MQTTvalue);
if (repeatIRwMQTT) {
Log.trace(F("Pub. IR for rpt" CR));
pubMQTT(subjectForwardMQTTtoIR, MQTTvalue);
}
}
}
}
# ifdef jsonReceiving
void MQTTtoIR(char* topicOri, JsonObject& IRdata) {
if (cmpToMainTopic(topicOri, subjectMQTTtoIR)) {
Log.trace(F("MQTTtoIR json" CR));
uint64_t data = IRdata["value"];
const char* raw = IRdata["raw"];
const char* hex = IRdata["hex"];
if (hex) { // we privilegiate the hex usage over the value one (less risk of error)
Log.trace(F("hex: %s" CR), hex);
data = getUInt64fromHex(hex);
}
if (data != 0 || raw) {
Log.trace(F("MQTTtoIR value || raw detected" CR));
bool signalSent = false;
const char* protocol_name = IRdata["protocol_name"];
unsigned int valueBITS = IRdata["bits"] | 0;
uint16_t valueRPT = IRdata["repeat"] | repeatIRwNumber;
if (raw) {
Log.trace(F("Raw: %s" CR), raw);
unsigned int s = strlen(raw);
//number of "," value count
int count = 0;
for (int i = 0; i < s; i++) {
if (raw[i] == ',') {
count++;
}
}
# ifdef IR_GC
if (strcmp(protocol_name, "GC") == 0) { // sending GC data from https://irdb.globalcache.com
Log.trace(F("GC" CR));
//buffer allocation from char datacallback
uint16_t GC[count + 1];
String value = "";
int j = 0;
for (int i = 0; i < s; i++) {
if (raw[i] != ',') {
value = value + String(raw[i]);
}
if ((raw[i] == ',') || (i == s - 1)) {
GC[j] = value.toInt();
value = "";
j++;
}
}
irsend.sendGC(GC, j);
signalSent = true;
}
# endif
# ifdef IR_RAW
if (strcmp(protocol_name, "Raw") == 0) { // sending Raw data
Log.trace(F("Raw" CR));
//buffer allocation from char datacallback
# if defined(ESP8266) || defined(ESP32)
uint16_t Raw[count + 1];
# else
unsigned int Raw[count + 1];
# endif
String value = "";
int j = 0;
for (int i = 0; i < s; i++) {
if (raw[i] != ',') {
value = value + String(raw[i]);
}
if ((raw[i] == ',') || (i == s - 1)) {
Raw[j] = value.toInt();
value = "";
j++;
}
}
irsend.sendRaw(Raw, j, RawFrequency);
signalSent = true;
}
# endif
} else if (protocol_name && (strcmp(protocol_name, "NEC") != 0)) {
Log.trace(F("Using Identified Protocol: %s bits: %d repeat: %d" CR), protocol_name, valueBITS, valueRPT);
signalSent = sendIdentifiedProtocol(protocol_name, data, hex, valueBITS, valueRPT);
} else {
Log.trace(F("Using NEC protocol" CR));
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = NEC_BITS;
# if defined(ESP8266) || defined(ESP32)
irsend.sendNEC(data, valueBITS, valueRPT);
# else
for (int i = 0; i <= valueRPT; i++)
irsend.sendNEC(data, valueBITS);
# endif
signalSent = true;
}
if (signalSent) { // we acknowledge the sending by publishing the value to an acknowledgement topic, for the moment even if it is a signal repetition we acknowledge also
Log.notice(F("MQTTtoIR OK" CR));
pub(subjectGTWIRtoMQTT, IRdata);
}
irrecv.enableIRIn(); // ReStart the IR receiver (if not restarted it is not able to receive data)
} else {
Log.error(F("MQTTtoIR failed json read" CR));
}
}
}
# endif
bool sendIdentifiedProtocol(const char* protocol_name, SIGNAL_SIZE_UL_ULL data, const char* hex, unsigned int valueBITS, uint16_t valueRPT) {
uint8_t dataarray[valueBITS];
if (hex) {
const char* ptr = NULL;
(strstr(hex, "0x") != NULL) ? ptr = hex += 2 : ptr = hex;
for (int i = 0; i < sizeof dataarray / sizeof *dataarray; i++) {
sscanf(ptr, "%2hhx", &dataarray[i]);
ptr += 2;
}
for (int i = 0; i < valueBITS; i++) {
Log.trace(F("%x"), dataarray[i]);
}
}
# ifdef IR_WHYNTER
if (strcmp(protocol_name, "WHYNTER") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = WHYNTER_BITS;
# if defined(ESP8266) || defined(ESP32)
irsend.sendWhynter(data, valueBITS, valueRPT);
# else
for (int i = 0; i <= valueRPT; i++)
irsend.sendWhynter(data, valueBITS);
# endif
return true;
}
# endif
# ifdef IR_LG
if (strcmp(protocol_name, "LG") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = LG_BITS;
# if defined(ESP8266) || defined(ESP32)
irsend.sendLG(data, valueBITS, valueRPT);
# else
for (int i = 0; i <= valueRPT; i++)
irsend.sendLG(data, valueBITS);
# endif
return true;
}
# endif
# ifdef IR_SONY
if (strcmp(protocol_name, "SONY") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
# if defined(ESP8266) || defined(ESP32)
if (valueBITS == 0)
valueBITS = SONY_20_BITS;
irsend.sendSony(data, valueBITS, valueRPT);
# else
if (valueBITS == 0)
valueBITS = SONY_12_BITS;
for (int i = 0; i <= valueRPT; i++)
irsend.sendSony(data, valueBITS);
# endif
return true;
}
# endif
# ifdef IR_DISH
if (strcmp(protocol_name, "DISH") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = DISH_BITS;
# if defined(ESP8266) || defined(ESP32)
irsend.sendDISH(data, valueBITS, valueRPT);
# else
for (int i = 0; i <= valueRPT; i++)
irsend.sendDISH(data, valueBITS);
# endif
return true;
}
# endif
# ifdef IR_RC5
if (strcmp(protocol_name, "RC5") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = RC5_BITS;
# if defined(ESP8266) || defined(ESP32)
irsend.sendRC5(data, valueBITS, valueRPT);
# else
for (int i = 0; i <= valueRPT; i++)
irsend.sendRC5(data, valueBITS);
# endif
return true;
}
# endif
# ifdef IR_RC6
if (strcmp(protocol_name, "RC6") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = RC6_MODE0_BITS;
# if defined(ESP8266) || defined(ESP32)
irsend.sendRC6(data, valueBITS, valueRPT);
# else
for (int i = 0; i <= valueRPT; i++)
irsend.sendRC6(data, valueBITS);
# endif
return true;
}
# endif
# ifdef IR_SHARP
if (strcmp(protocol_name, "SHARP") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = SHARP_BITS;
# if defined(ESP8266) || defined(ESP32)
irsend.sendSharpRaw(data, valueBITS, valueRPT);
# else
for (int i = 0; i <= valueRPT; i++)
irsend.sendSharpRaw(data, valueBITS);
# endif
return true;
}
# endif
# ifdef IR_SAMSUNG
if (strcmp(protocol_name, "SAMSUNG") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = SAMSUNG_BITS;
# if defined(ESP8266) || defined(ESP32)
irsend.sendSAMSUNG(data, valueBITS, valueRPT);
# else
for (int i = 0; i <= valueRPT; i++)
irsend.sendSAMSUNG(data, valueBITS);
# endif
return true;
}
# endif
# ifdef IR_JVC
if (strcmp(protocol_name, "JVC") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = JVC_BITS;
# if defined(ESP8266) || defined(ESP32)
irsend.sendJVC(data, valueBITS, valueRPT);
# else
for (int i = 0; i <= valueRPT; i++)
irsend.sendJVC(data, valueBITS);
# endif
return true;
}
# endif
# ifdef IR_PANASONIC
if (strcmp(protocol_name, "PANASONIC") == 0) {
# if defined(ESP8266) || defined(ESP32)
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = PANASONIC_BITS;
irsend.sendPanasonic(PanasonicAddress, data, valueBITS, valueRPT);
# else
for (int i = 0; i <= valueRPT; i++)
irsend.sendPanasonic(PanasonicAddress, data);
# endif
return true;
}
# endif
# if defined(ESP8266) || defined(ESP32)
# ifdef IR_COOLIX
if (strcmp(protocol_name, "COOLIX") == 0) {
Log.trace(F("Sending %s:" CR), protocol_name);
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kCoolixBits;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kCoolixDefaultRepeat);
irsend.sendCOOLIX(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_RCMM
if (strcmp(protocol_name, "RCMM") == 0) {
Log.trace(F("Sending %s:" CR), protocol_name);
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kRCMMBits;
irsend.sendRCMM(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_DENON
if (strcmp(protocol_name, "DENON") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = DENON_BITS;
irsend.sendDenon(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_GICABLE
if (strcmp(protocol_name, "GICABLE") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kGicableBits;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kGicableMinRepeat);
irsend.sendGICable(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_SHERWOOD
if (strcmp(protocol_name, "SHERWOOD") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kSherwoodBits;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kSherwoodMinRepeat);
irsend.sendSherwood(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_MITSUBISHI
if (strcmp(protocol_name, "MITSUBISHI") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kMitsubishiBits;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kMitsubishiMinRepeat);
irsend.sendMitsubishi(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_NIKAI
if (strcmp(protocol_name, "NIKAI") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kNikaiBits;
irsend.sendNikai(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_MIDEA
if (strcmp(protocol_name, "MIDEA") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kMideaBits;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kMideaMinRepeat);
irsend.sendMidea(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_MAGIQUEST
if (strcmp(protocol_name, "MAGIQUEST") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kMagiquestBits;
irsend.sendMagiQuest(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_LASERTAG
if (strcmp(protocol_name, "LASERTAG") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kLasertagBits;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kLasertagMinRepeat);
irsend.sendLasertag(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_CARRIER_AC
if (strcmp(protocol_name, "CARRIER_AC") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kCarrierAcBits;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kCarrierAcMinRepeat);
irsend.sendCarrierAC(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_MITSUBISHI2
if (strcmp(protocol_name, "MITSUBISHI2") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kMitsubishiBits;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kMitsubishiMinRepeat);
irsend.sendMitsubishi2(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_AIWA_RC_T501
if (strcmp(protocol_name, "AIWA_RC_T501") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kAiwaRcT501Bits;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kAiwaRcT501MinRepeats);
irsend.sendAiwaRCT501(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_DAIKIN
if (strcmp(protocol_name, "DAIKIN") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kDaikinStateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kDaikinDefaultRepeat);
irsend.sendDaikin(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_KELVINATOR
if (strcmp(protocol_name, "KELVINATOR") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kKelvinatorStateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kKelvinatorDefaultRepeat);
irsend.sendKelvinator(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_MITSUBISHI_AC
if (strcmp(protocol_name, "MITSUBISHI_AC") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kMitsubishiACStateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kMitsubishiACMinRepeat);
irsend.sendMitsubishiAC(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_SANYO
if (strcmp(protocol_name, "SANYOLC7461") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kSanyoLC7461Bits;
irsend.sendSanyoLC7461(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_GREE
if (strcmp(protocol_name, "GREE") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kGreeStateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kGreeDefaultRepeat);
irsend.sendGree(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_ARGO
if (strcmp(protocol_name, "ARGO") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kArgoStateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kArgoDefaultRepeat);
irsend.sendArgo(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_TROTEC
if (strcmp(protocol_name, "TROTEC") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kTrotecStateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kTrotecDefaultRepeat);
irsend.sendTrotec(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_TOSHIBA_AC
if (strcmp(protocol_name, "TOSHIBA_AC") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kToshibaACBits;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kToshibaACMinRepeat);
irsend.sendToshibaAC(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_FUJITSU_AC
if (strcmp(protocol_name, "FUJITSU_AC") == 0) {
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kFujitsuAcMinRepeat);
irsend.sendFujitsuAC(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_HAIER_AC
if (strcmp(protocol_name, "HAIER_AC") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kHaierACStateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kHaierAcDefaultRepeat);
irsend.sendHaierAC(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_HITACHI_AC
if (strcmp(protocol_name, "HITACHI_AC") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kHitachiAcStateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kHitachiAcDefaultRepeat);
irsend.sendHitachiAC(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_HITACHI_AC1
if (strcmp(protocol_name, "HITACHI_AC1") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kHitachiAc1StateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kHitachiAcDefaultRepeat);
irsend.sendHitachiAC1(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_HITACHI_AC2
if (strcmp(protocol_name, "HITACHI_AC2") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kHitachiAc2StateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kHitachiAcDefaultRepeat);
irsend.sendHitachiAC2(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_HAIER_AC_YRW02
if (strcmp(protocol_name, "HAIER_AC_YRW02") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kHaierACYRW02StateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kHaierAcYrw02DefaultRepeat);
irsend.sendHaierACYRW02(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_WHIRLPOOL_AC
if (strcmp(protocol_name, "WHIRLPOOL_AC") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kWhirlpoolAcStateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kWhirlpoolAcDefaultRepeat);
irsend.sendWhirlpoolAC(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_SAMSUNG_AC
if (strcmp(protocol_name, "SAMSUNG_AC") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kSamsungAcStateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kSamsungAcDefaultRepeat);
irsend.sendSamsungAC(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_LUTRON
if (strcmp(protocol_name, "LUTRON") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kLutronBits;
irsend.sendLutron(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_ELECTRA_AC
if (strcmp(protocol_name, "ELECTRA_AC") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kElectraAcStateLength;
irsend.sendElectraAC(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_PANASONIC_AC
if (strcmp(protocol_name, "PANASONIC_AC") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kPanasonicAcStateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kPanasonicAcDefaultRepeat);
irsend.sendPanasonicAC(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_PIONEER
if (strcmp(protocol_name, "PIONEER") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kPioneerBits;
irsend.sendPioneer(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_LG2
if (strcmp(protocol_name, "LG2") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kLgBits;
irsend.sendLG2(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_MWM
if (strcmp(protocol_name, "MWM") == 0) {
irsend.sendMWM(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_DAIKIN2
if (strcmp(protocol_name, "DAIKIN2") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kDaikin2StateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kDaikin2DefaultRepeat);
irsend.sendDaikin2(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_VESTEL_AC
if (strcmp(protocol_name, "VESTEL_AC") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kVestelAcBits;
irsend.sendVestelAc(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_SAMSUNG36
if (strcmp(protocol_name, "SAMSUNG36") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kSamsung36Bits;
irsend.sendSamsung36(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_TCL112AC
if (strcmp(protocol_name, "TCL112AC") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kTcl112AcStateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kTcl112AcDefaultRepeat);
irsend.sendTcl112Ac(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_TECO
if (strcmp(protocol_name, "TECO") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kTecoBits;
irsend.sendTeco(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_LEGOPF
if (strcmp(protocol_name, "LEGOPF") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kLegoPfBits;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kLegoPfMinRepeat);
irsend.sendLegoPf(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_MITSUBISHIHEAVY88
if (strcmp(protocol_name, "MITSUBISHIHEAVY88") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kMitsubishiHeavy88StateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kMitsubishiHeavy88MinRepeat);
irsend.sendMitsubishiHeavy88(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_MITSUBISHIHEAVY152
if (strcmp(protocol_name, "MITSUBISHIHEAVY152") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kMitsubishiHeavy152StateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kMitsubishiHeavy152MinRepeat);
irsend.sendMitsubishiHeavy152(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_DAIKIN216
if (strcmp(protocol_name, "DAIKIN216") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kDaikin216StateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kDaikin216DefaultRepeat);
irsend.sendDaikin216(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_SHARP_AC
if (strcmp(protocol_name, "SHARP_AC") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kSharpAcStateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kSharpAcDefaultRepeat);
irsend.sendSharpAc(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_GOODWEATHER
if (strcmp(protocol_name, "GOODWEATHER_AC") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kGoodweatherBits;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kGoodweatherMinRepeat);
irsend.sendGoodweather(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_INAX
if (strcmp(protocol_name, "INAX") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kInaxBits;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kInaxMinRepeat);
irsend.sendInax(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_DAIKIN160
if (strcmp(protocol_name, "DAIKIN160") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kDaikin160StateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kDaikin160DefaultRepeat);
irsend.sendDaikin160(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_NEOCLIMA
if (strcmp(protocol_name, "NEOCLIMA") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kNeoclimaStateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kNeoclimaMinRepeat);
irsend.sendNeoclima(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_DAIKIN176
if (strcmp(protocol_name, "DAIKIN176") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kDaikin176StateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kDaikin176DefaultRepeat);
irsend.sendDaikin176(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_DAIKIN128
if (strcmp(protocol_name, "DAIKIN128") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kDaikin128StateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kDaikin128DefaultRepeat);
irsend.sendDaikin128(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_AMCOR
if (strcmp(protocol_name, "AMCOR") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kAmcorStateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kAmcorDefaultRepeat);
irsend.sendAmcor(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_DAIKIN152
if (strcmp(protocol_name, "DAIKIN152") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kDaikin152StateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kDaikin152DefaultRepeat);
irsend.sendDaikin152(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_MITSUBISHI136
if (strcmp(protocol_name, "MITSUBISHI136") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kMitsubishi136StateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kMitsubishi136MinRepeat);
irsend.sendMitsubishi136(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_MITSUBISHI112
if (strcmp(protocol_name, "MITSUBISHI112") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kMitsubishi112StateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kMitsubishi112MinRepeat);
irsend.sendMitsubishi112(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_HITACHI_AC424
if (strcmp(protocol_name, "HITACHI_AC424") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kHitachiAc424StateLength;
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kHitachiAcDefaultRepeat);
irsend.sendHitachiAc424(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_SONY_38K
if (strcmp(protocol_name, "SONY_38K") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, (uint16_t)(kSonyMinRepeat + 1));
if (valueBITS == 0)
valueBITS = kSony20Bits;
irsend.sendSony38(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_EPSON
if (strcmp(protocol_name, "EPSON") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kEpsonMinRepeat);
if (valueBITS == 0)
valueBITS = kEpsonBits;
irsend.sendEpson(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_SYMPHONY
if (strcmp(protocol_name, "SYMPHONY") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kSymphonyDefaultRepeat);
if (valueBITS == 0)
valueBITS = kSymphonyBits;
irsend.sendSymphony(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_HITACHI_AC3
if (strcmp(protocol_name, "HITACHI_AC3") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kHitachiAcDefaultRepeat);
if (valueBITS == 0)
Log.error(F("For this protocol you should have a BIT number as there is no default one defined" CR));
irsend.sendHitachiAc3(dataarray, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_DAIKIN64
if (strcmp(protocol_name, "DAIKIN64") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kDaikin64DefaultRepeat);
if (valueBITS == 0)
valueBITS = kDaikin64Bits;
irsend.sendDaikin64(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_AIRWELL
if (strcmp(protocol_name, "AIRWELL") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kAirwellMinRepeats);
if (valueBITS == 0)
valueBITS = kAirwellBits;
irsend.sendAirwell(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_DELONGHI_AC
if (strcmp(protocol_name, "DELONGHI_AC") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kDelonghiAcDefaultRepeat);
if (valueBITS == 0)
valueBITS = kDelonghiAcBits;
irsend.sendDelonghiAc(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_DOSHISHA
if (strcmp(protocol_name, "DOSHISHA") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueBITS == 0)
valueBITS = kDoshishaBits;
irsend.sendDoshisha(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_CARRIER_AC40
if (strcmp(protocol_name, "CARRIER_AC40") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kCarrierAc40MinRepeat);
if (valueBITS == 0)
valueBITS = kCarrierAc40Bits;
irsend.sendCarrierAC40(data, valueBITS, valueRPT);
return true;
}
# endif
# ifdef IR_CARRIER_AC64
if (strcmp(protocol_name, "CARRIER_AC64") == 0) {
Log.notice(F("Sending IR signal with %s" CR), protocol_name);
if (valueRPT == repeatIRwNumber)
valueRPT = std::max(valueRPT, kCarrierAc64MinRepeat);
if (valueBITS == 0)
valueBITS = kCarrierAc64Bits;
irsend.sendCarrierAC64(data, valueBITS, valueRPT);
return true;
}
# endif
Log.warning(F("Unknown IR protocol" CR));
return false;
# endif
}
#endif
Reference in new issue View Git Blame Copy Permalink