Northern Man
2e0d1708c3
* Update to rtl_433_ESP 0.1.5 Includes support for LILYGO® LoRa32 V2.1_1.6.1 433 Mhz * Fix lint issue * Fix build and lint issues * Add lilygo-rtl_433 to build.yml
290 lines
10 KiB
Arduino
290 lines
10 KiB
Arduino
/*
|
|
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
|
|
|
|
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
|
|
Send and receiving command by MQTT
|
|
|
|
Supported boards with displays
|
|
|
|
HELTEC ESP32 LORA - SSD1306 / Onboard 0.96-inch 128*64 dot matrix OLED display
|
|
LILYGO® LoRa32 V2.1_1.6.1 433 Mhz / https://www.lilygo.cc/products/lora3?variant=42476923879605
|
|
|
|
Copyright: (c)Florian ROBERT
|
|
|
|
Contributors:
|
|
- 1technophile
|
|
- NorthernMan54
|
|
|
|
This file is part of OpenMQTTGateway.
|
|
|
|
OpenMQTTGateway is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
OpenMQTTGateway is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#if defined(ZdisplaySSD1306)
|
|
|
|
# include <ArduinoJson.h>
|
|
|
|
# include "ArduinoLog.h"
|
|
# include "User_config.h"
|
|
# include "config_SSD1306.h"
|
|
|
|
SemaphoreHandle_t semaphoreOLEDOperation;
|
|
|
|
void logToLCD(bool display) {
|
|
display ? Log.begin(LOG_LEVEL_LCD, &Oled) : Log.begin(LOG_LEVEL, &Serial); // Log on LCD following LOG_LEVEL_LCD
|
|
}
|
|
|
|
void setupSSD1306() {
|
|
Log.trace(F("Setup SSD1306 Display" CR));
|
|
Log.trace(F("ZdisplaySSD1306 command topic: %s" CR), subjectMQTTtoSSD1306set);
|
|
Oled.begin();
|
|
Log.notice(F("Setup SSD1306 Display end" CR));
|
|
|
|
# if LOG_TO_LCD
|
|
Log.begin(LOG_LEVEL_LCD, &Oled); // Log on LCD following LOG_LEVEL_LCD
|
|
# endif
|
|
}
|
|
|
|
static int previousLogLevel = 0;
|
|
|
|
void loopSSD1306() {
|
|
int currentLogLevel = Log.getLastMsgLevel();
|
|
if (previousLogLevel != currentLogLevel && lowpowermode != 2) {
|
|
switch (currentLogLevel) {
|
|
case 1:
|
|
case 2:
|
|
// wakeScreen(NORMAL_LCD_BRIGHTNESS);
|
|
// M5.Lcd.fillScreen(TFT_RED); // FATAL, ERROR
|
|
// M5.Lcd.setTextColor(TFT_BLACK, TFT_RED);
|
|
break;
|
|
case 3:
|
|
// wakeScreen(NORMAL_LCD_BRIGHTNESS);
|
|
// M5.Lcd.fillScreen(TFT_ORANGE); // WARNING
|
|
// M5.Lcd.setTextColor(TFT_BLACK, TFT_ORANGE);
|
|
break;
|
|
default:
|
|
// TODO: Display splash screen x seconds after last message displayed on OLED
|
|
Oled.fillScreen(WHITE);
|
|
Oled.drawLogo((int)OLED_WIDTH * 0.24, (int)(OLED_WIDTH / 2) - OLED_WIDTH * 0.2, (int)(OLED_HEIGHT / 2) + OLED_HEIGHT * 0.2, true, true, true, true, true, true); // Name
|
|
break;
|
|
}
|
|
}
|
|
previousLogLevel = currentLogLevel;
|
|
}
|
|
|
|
void MQTTtoSSD1306(char* topicOri, JsonObject& SSD1306data) { // json object decoding
|
|
bool success = false;
|
|
if (cmpToMainTopic(topicOri, subjectMQTTtoSSD1306set)) {
|
|
Log.trace(F("MQTTtoSSD1306 json set" CR));
|
|
// Log display set between SSD1306 lcd (true) and serial monitor (false)
|
|
if (SSD1306data.containsKey("log-lcd")) {
|
|
bool displayOnLCD = SSD1306data["log-lcd"];
|
|
Log.notice(F("Set lcd log: %T" CR), displayOnLCD);
|
|
logToLCD(displayOnLCD);
|
|
success = true;
|
|
}
|
|
if (success) {
|
|
pub(subjectSSD1306toMQTTset, SSD1306data);
|
|
} else {
|
|
pub(subjectSSD1306toMQTTset, "{\"Status\": \"Error\"}"); // Fail feedback
|
|
Log.error(F("MQTTtoSSD1306 Fail json" CR), SSD1306data);
|
|
}
|
|
}
|
|
}
|
|
|
|
// Simple print methonds
|
|
|
|
void ssd1306Print(char* line1, char* line2, char* line3) {
|
|
Oled.println(line1);
|
|
Oled.println(line2);
|
|
Oled.println(line3);
|
|
delay(2000);
|
|
}
|
|
|
|
void ssd1306Print(char* line1, char* line2) {
|
|
Oled.println(line1);
|
|
Oled.println(line2);
|
|
delay(2000);
|
|
}
|
|
|
|
void ssd1306Print(char* line1) {
|
|
Oled.println(line1);
|
|
delay(2000);
|
|
}
|
|
|
|
// This pattern was borrowed from HardwareSerial and modified to support the ssd1306 display
|
|
|
|
OledSerial Oled(0); // Not sure about this, came from Hardwareserial
|
|
OledSerial::OledSerial(int x) {
|
|
# if defined(WIFI_Kit_32) || defined(WIFI_LoRa_32) || defined(WIFI_LoRa_32_V2)
|
|
pinMode(RST_OLED, OUTPUT);
|
|
digitalWrite(RST_OLED, LOW);
|
|
delay(50);
|
|
digitalWrite(RST_OLED, HIGH);
|
|
display = new SSD1306Wire(0x3c, SDA_OLED, SCL_OLED, GEOMETRY_128_64);
|
|
# elif defined(Wireless_Stick)
|
|
pinMode(RST_OLED, OUTPUT);
|
|
digitalWrite(RST_OLED, LOW);
|
|
delay(50);
|
|
digitalWrite(RST_OLED, HIGH);
|
|
display = new SSD1306Wire(0x3c, SDA_OLED, SCL_OLED, GEOMETRY_64_32);
|
|
# elif defined(ARDUINO_TTGO_LoRa32_v21new) // LILYGO® Disaster-Radio LoRa V2.1_1.6.1
|
|
pinMode(OLED_RST, OUTPUT);
|
|
digitalWrite(OLED_RST, LOW);
|
|
delay(50);
|
|
digitalWrite(OLED_RST, HIGH);
|
|
display = new SSD1306Wire(0x3c, OLED_SDA, OLED_SCL, GEOMETRY_128_64);
|
|
# endif
|
|
}
|
|
|
|
void OledSerial::begin() {
|
|
// SSD1306.begin(); // User OMG serial support
|
|
|
|
semaphoreOLEDOperation = xSemaphoreCreateBinary();
|
|
xSemaphoreGive(semaphoreOLEDOperation);
|
|
|
|
display->init();
|
|
display->flipScreenVertically();
|
|
display->setFont(ArialMT_Plain_10);
|
|
|
|
display->setColor(WHITE);
|
|
display->fillRect(0, 0, OLED_WIDTH, OLED_HEIGHT);
|
|
display->display();
|
|
ssd1306Intro(OLED_WIDTH * 0.24, (OLED_WIDTH / 2) - OLED_WIDTH * 0.2, (OLED_HEIGHT / 2) + OLED_HEIGHT * 0.2);
|
|
display->setLogBuffer(OLED_TEXT_ROWS, OLED_TEXT_BUFFER);
|
|
delay(1000);
|
|
}
|
|
|
|
// Dummy virtual's from Serial
|
|
|
|
int OledSerial::available(void) {
|
|
}
|
|
|
|
int OledSerial::peek(void) {
|
|
}
|
|
|
|
int OledSerial::read(void) {
|
|
}
|
|
|
|
void OledSerial::flush(void) {
|
|
}
|
|
|
|
void OledSerial::fillScreen(OLEDDISPLAY_COLOR color) {
|
|
if (xSemaphoreTake(semaphoreOLEDOperation, pdMS_TO_TICKS(30000)) == pdTRUE) {
|
|
display->clear();
|
|
display->setColor(color);
|
|
display->fillRect(0, 0, OLED_WIDTH, OLED_HEIGHT);
|
|
xSemaphoreGive(semaphoreOLEDOperation);
|
|
}
|
|
}
|
|
|
|
size_t OledSerial::write(const uint8_t* buffer, size_t size) {
|
|
if (xPortGetCoreID() == CONFIG_ARDUINO_RUNNING_CORE) {
|
|
if (xSemaphoreTake(semaphoreOLEDOperation, pdMS_TO_TICKS(30000)) == pdTRUE) {
|
|
display->clear();
|
|
display->setColor(WHITE);
|
|
display->setFont(ArialMT_Plain_10);
|
|
while (size) {
|
|
display->write((char)*buffer++);
|
|
size--;
|
|
}
|
|
display->drawLogBuffer(0, 0);
|
|
display->display();
|
|
xSemaphoreGive(semaphoreOLEDOperation);
|
|
return size;
|
|
}
|
|
}
|
|
// Default to Serial output if the display is not available
|
|
return Serial.write(buffer, size);
|
|
}
|
|
|
|
/*
|
|
Display OpenMQTTGateway logo - borrowed from ZboardM5.ino and tweaked for ssd1306 display ( removed color and tweaked size/location )
|
|
*/
|
|
|
|
void OledSerial::ssd1306Intro(int scale, int displayWidth, int displayHeight) {
|
|
drawLogo(scale, displayWidth, displayHeight, false, true, false, false, false, false); // Circle 2
|
|
drawLogo(scale, displayWidth, displayHeight, false, false, true, false, false, false); // Circle 3
|
|
drawLogo(scale, displayWidth, displayHeight, false, true, true, true, false, false); // Line 1
|
|
drawLogo(scale, displayWidth, displayHeight, false, true, true, false, true, false); // Line 2
|
|
drawLogo(scale, displayWidth, displayHeight, true, true, true, true, true, false); // Circle 1
|
|
drawLogo(scale, displayWidth, displayHeight, true, true, true, true, true, true); // Name
|
|
}
|
|
|
|
void OledSerial::drawLogo(int logoSize, int circle1X, int circle1Y, bool circle1, bool circle2, bool circle3, bool line1, bool line2, bool name) {
|
|
if (xSemaphoreTake(semaphoreOLEDOperation, pdMS_TO_TICKS(30000)) == pdTRUE) {
|
|
int circle1T = logoSize / 15;
|
|
int circle2T = logoSize / 25;
|
|
int circle3T = logoSize / 30;
|
|
|
|
int circle3Y = circle1Y - (logoSize * 1.2);
|
|
int circle3X = circle1X - (logoSize * 0.13);
|
|
int circle2X = circle1X - (logoSize * 1.05);
|
|
int circle2Y = circle1Y - (logoSize * 0.8);
|
|
|
|
if (line1) {
|
|
display->setColor(BLACK);
|
|
display->drawLine(circle1X - 2, circle1Y, circle2X - 2, circle2Y);
|
|
display->drawLine(circle1X - 1, circle1Y, circle2X - 1, circle2Y);
|
|
display->drawLine(circle1X, circle1Y, circle2X, circle2Y);
|
|
display->drawLine(circle1X + 1, circle1Y, circle2X + 1, circle2Y);
|
|
display->drawLine(circle1X + 2, circle1Y, circle2X + 2, circle2Y);
|
|
display->setColor(WHITE);
|
|
display->fillCircle(circle3X, circle3Y, logoSize / 4 - circle3T * 2); // , WHITE);
|
|
}
|
|
if (line2) {
|
|
display->setColor(BLACK);
|
|
display->drawLine(circle1X - 2, circle1Y, circle3X - 2, circle3Y);
|
|
display->drawLine(circle1X - 1, circle1Y, circle3X - 1, circle3Y);
|
|
display->drawLine(circle1X, circle1Y, circle3X, circle3Y);
|
|
display->drawLine(circle1X + 1, circle1Y, circle3X + 1, circle3Y);
|
|
display->setColor(WHITE);
|
|
display->fillCircle(circle2X, circle2Y, logoSize / 3 - circle2T * 2); // , WHITE);
|
|
}
|
|
if (circle1) {
|
|
display->setColor(WHITE);
|
|
display->fillCircle(circle1X, circle1Y, logoSize / 2); // , WHITE);
|
|
display->setColor(BLACK);
|
|
display->fillCircle(circle1X, circle1Y, logoSize / 2 - circle1T); // , TFT_GREEN);
|
|
display->setColor(WHITE);
|
|
display->fillCircle(circle1X, circle1Y, logoSize / 2 - circle1T * 2); // , WHITE);
|
|
}
|
|
if (circle2) {
|
|
display->setColor(WHITE);
|
|
display->fillCircle(circle2X, circle2Y, logoSize / 3); // , WHITE);
|
|
display->setColor(BLACK);
|
|
display->fillCircle(circle2X, circle2Y, logoSize / 3 - circle2T); // , TFT_ORANGE);
|
|
display->setColor(WHITE);
|
|
display->fillCircle(circle2X, circle2Y, logoSize / 3 - circle2T * 2); // , WHITE);
|
|
}
|
|
if (circle3) {
|
|
display->setColor(WHITE);
|
|
display->fillCircle(circle3X, circle3Y, logoSize / 4); // , WHITE);
|
|
display->setColor(BLACK);
|
|
display->fillCircle(circle3X, circle3Y, logoSize / 4 - circle3T); // , TFT_PINK);
|
|
display->setColor(WHITE);
|
|
display->fillCircle(circle3X, circle3Y, logoSize / 4 - circle3T * 2); // , WHITE);
|
|
}
|
|
if (name) {
|
|
display->setColor(BLACK);
|
|
display->drawString(circle1X + (circle1X * 0.27), circle1Y, "penMQTTGateway");
|
|
}
|
|
display->display();
|
|
delay(50);
|
|
xSemaphoreGive(semaphoreOLEDOperation);
|
|
}
|
|
}
|
|
|
|
#endif
|