chriz/OpenMQTT-Gateway
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 5 Wiki Activity
Files
c04e44c753f7124a72a67b5ad9c874dc30b2866d
OpenMQTT-Gateway/main/main.ino
T
BigDiandLeon Kiefer 0a9e8eaf35 Add basic FASTLED function initated by Joen (#433) 
* merge FastLED part of Joen

Co-Authored-By: Leon Kiefer <leon.k97@gmx.de>
2019-08-02 10:20:58 +02:00

1212 lines
34 KiB
Arduino
Raw Blame History

/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Send and receiving command by MQTT
This program enables to:
- receive MQTT data from a topic and send signal (RF, IR, BLE, GSM) corresponding to the received MQTT data
- publish MQTT data to a different topic related to received signals (RF, IR, BLE, GSM)
Copyright: (c)Florian ROBERT
This file is part of OpenMQTTGateway.
OpenMQTTGateway is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
OpenMQTTGateway is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "User_config.h"
// array to store previous received RFs, IRs codes and their timestamps
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
#define array_size 12
unsigned long ReceivedSignal[array_size][2] ={{0,0},{0,0},{0,0},{0,0},{0,0},{0,0},{0,0},{0,0},{0,0},{0,0},{0,0},{0,0}};
//Time used to wait for an interval before checking system measures
unsigned long timer_sys_measures = 0;
#else // boards with smaller memory
#define array_size 4
unsigned long ReceivedSignal[array_size][2] ={{0,0},{0,0},{0,0},{0,0}};
#endif
#include <PubSubClient.h>
#include <ArduinoJson.h>
// Modules config inclusion
#if defined(ZgatewayRF) || defined(ZgatewayRF2) || defined(ZgatewayPilight)
#include "config_RF.h"
#endif
#ifdef ZgatewayRF315
#include "config_RF315.h"
#endif
#ifdef ZgatewayLORA
#include "config_LORA.h"
#endif
#ifdef ZgatewaySRFB
#include "config_SRFB.h"
#endif
#ifdef ZgatewayBT
#include "config_BT.h"
#endif
#ifdef ZgatewayIR
#include "config_IR.h"
#endif
#ifdef Zgateway2G
#include "config_2G.h"
#endif
#ifdef ZactuatorONOFF
#include "config_ONOFF.h"
#endif
#ifdef ZsensorINA226
#include "config_INA226.h"
#endif
#ifdef ZsensorHCSR501
#include "config_HCSR501.h"
#endif
#ifdef ZsensorADC
#include "config_ADC.h"
#endif
#ifdef ZsensorBH1750
#include "config_BH1750.h"
#endif
#ifdef ZsensorTSL2561
#include "config_TSL2561.h"
#endif
#ifdef ZsensorBME280
#include "config_BME280.h"
#endif
#ifdef ZsensorDHT
#include "config_DHT.h"
#endif
#ifdef ZgatewayRFM69
#include "config_RFM69.h"
#endif
#ifdef ZsensorGPIOInput
#include "config_GPIOInput.h"
#endif
#ifdef ZsensorGPIOKeyCode
#include "config_GPIOKeyCode.h"
#endif
#ifdef ZmqttDiscovery
#include "config_mqttDiscovery.h"
#endif
#ifdef ZactuatorFASTLED
#include "config_FASTLED.h"
#endif
/*------------------------------------------------------------------------*/
//adding this to bypass the problem of the arduino builder issue 50
void callback(char*topic, byte* payload,unsigned int length);
bool connectedOnce = false; //indicate if we have been connected once to MQTT
int failure_number = 0; // number of failure connecting to MQTT
#ifdef ESP32
#include <FS.h>
#include "SPIFFS.h"
#include <WiFi.h>
#include <ArduinoOTA.h>
#include <WiFiUdp.h>
WiFiClient eClient;
#include <WiFiManager.h>
#ifdef MDNS_SD
#include <ESPmDNS.h>
#endif
#elif defined(ESP8266)
#include <FS.h>
#include <ESP8266WiFi.h>
#include <ArduinoOTA.h>
#include <DNSServer.h>
#include <ESP8266WebServer.h>
#include <WiFiManager.h>
WiFiClient eClient;
#ifdef MDNS_SD
#include <ESP8266mDNS.h>
#endif
#else
#include <Ethernet.h>
EthernetClient eClient;
#endif
// client link to pubsub mqtt
PubSubClient client(eClient);
//MQTT last attemps reconnection date
unsigned long lastReconnectAttempt = 0;
void revert_hex_data(char * in, char * out, int l){
//reverting array 2 by 2 to get the data in good order
int i = l-2 , j = 0;
while ( i != -2 ) {
if (i%2 == 0) out[j] = in[i+1];
else out[j] = in[i-1];
j++;
i--;
}
out[l-1] = '\0';
}
void extract_char(char * token_char, char * subset, int start ,int l, bool reverse, bool isNumber){
char tmp_subset[l+1];
memcpy( tmp_subset, &token_char[start], l );
tmp_subset[l] = '\0';
if (isNumber){
char tmp_subset2[l+1];
if (reverse) revert_hex_data(tmp_subset, tmp_subset2, l+1);
else strncpy( tmp_subset2, tmp_subset , l+1);
long long_value = strtoul(tmp_subset2, NULL, 16);
sprintf(tmp_subset2, "%ld", long_value);
strncpy( subset, tmp_subset2 , l+1);
}else{
if (reverse) revert_hex_data(tmp_subset, subset, l+1);
else strncpy( subset, tmp_subset , l+1);
}
subset[l] = '\0';
}
int strpos(char *haystack, char *needle) //from @miere https://stackoverflow.com/users/548685/miere
{
char *p = strstr(haystack, needle);
if (p)
return p - haystack;
return -1;
}
char* ip2CharArray(IPAddress ip) { //from Nick Lee https://stackoverflow.com/questions/28119653/arduino-display-ethernet-localip
static char a[16];
sprintf(a, "%d.%d.%d.%d", ip[0], ip[1], ip[2], ip[3]);
return a;
}
bool to_bool(String const& s) { // thanks Chris Jester-Young from stackoverflow
return s != "0";
}
//trace
void trc(String msg){
#ifdef TRACE
Serial.println(msg);
digitalWrite(led_info, HIGH);
#endif
#ifdef subjectTRACEtoMQTT
pub(subjectTRACEtoMQTT,msg);
#endif
}
void trc(int msg){
#ifdef TRACE
Serial.println(msg);
digitalWrite(led_info, HIGH);
#endif
#ifdef subjectTRACEtoMQTT
pub(subjectTRACEtoMQTT,msg);
#endif
}
void trc(unsigned int msg){
#ifdef TRACE
Serial.println(msg);
digitalWrite(led_info, HIGH);
#endif
#ifdef subjectTRACEtoMQTT
pub(subjectTRACEtoMQTT,msg);
#endif
}
void trc(long msg){
#ifdef TRACE
Serial.println(msg);
digitalWrite(led_info, HIGH);
#endif
#ifdef subjectTRACEtoMQTT
pub(subjectTRACEtoMQTT,msg);
#endif
}
void trc(unsigned long msg){
#ifdef TRACE
Serial.println(msg);
digitalWrite(led_info, HIGH);
#endif
#ifdef subjectTRACEtoMQTT
pub(subjectTRACEtoMQTT,msg);
#endif
}
void trc(double msg){
#ifdef TRACE
Serial.println(msg);
digitalWrite(led_info, HIGH);
#endif
#ifdef subjectTRACEtoMQTT
pub(subjectTRACEtoMQTT,msg);
#endif
}
void trc(float msg){
#ifdef TRACE
Serial.println(msg);
digitalWrite(led_info, HIGH);
#endif
#ifdef subjectTRACEtoMQTT
pub(subjectTRACEtoMQTT,msg);
#endif
}
void trc(JsonObject& data){
char JSONmessageBuffer[JSON_MSG_BUFFER];
data.printTo(JSONmessageBuffer, sizeof(JSONmessageBuffer));
trc(JSONmessageBuffer);
}
void pub(char * topic, char * payload, bool retainFlag){
client.publish(topic, payload, retainFlag);
}
void pub(char * topicori, JsonObject& data){
digitalWrite(led_receive, HIGH);
String topic = topicori;
#ifdef valueAsASubject
unsigned long value = data["value"];
if (value != 0){
topic = topic + "/"+ String(value);
}
#endif
#ifdef jsonPublishing
char JSONmessageBuffer[JSON_MSG_BUFFER];
trc(F("Pub json into:"));
trc(topic);
data.printTo(JSONmessageBuffer, sizeof(JSONmessageBuffer));
trc(JSONmessageBuffer);
pub(topic, JSONmessageBuffer);
#endif
#ifdef simplePublishing
trc(F("Pub data per topic"));
// Loop through all the key-value pairs in obj
for (JsonPair& p : data) {
#if defined(ESP8266)
yield();
#endif
if (p.value.is<unsigned long>() && strcmp(p.key, "rssi") != 0) { //test rssi , bypass solution due to the fact that a int is considered as an unsigned long
trc(p.key);
trc(p.value.as<unsigned long>());
if (strcmp(p.key, "value") == 0){ // if data is a value we don't integrate the name into the topic
pub(topic,p.value.as<unsigned long>());
}else{ // if data is not a value we integrate the name into the topic
pub(topic + "/" + String(p.key),p.value.as<unsigned long>());
}
}else if (p.value.is<int>()) {
trc(p.key);
trc(p.value.as<int>());
pub(topic + "/" + String(p.key),p.value.as<int>());
} else if (p.value.is<float>()) {
trc(p.key);
trc(p.value.as<float>());
pub(topic + "/" + String(p.key),p.value.as<float>());
} else if (p.value.is<char*>()) {
trc(p.key);
trc(p.value.as<const char*>());
pub(topic + "/" + String(p.key),p.value.as<const char*>());
}
}
#endif
}
void pub(char * topic, char * payload){
client.publish(topic, payload);
}
void pub(String topic, char * payload){
client.publish((char *)topic.c_str(),payload);
}
void pub(char * topic, unsigned long payload){
char val[11];
sprintf(val, "%lu", payload);
client.publish(topic,val);
}
void pub(char * topic, String payload){
client.publish(topic,(char *)payload.c_str());
}
void pub(String topic, String payload){
client.publish((char *)topic.c_str(),(char *)payload.c_str());
}
void pub(String topic, int payload){
char val[12];
sprintf(val, "%d", payload);
client.publish((char *)topic.c_str(),val);
}
void pub(String topic, float payload){
char val[12];
dtostrf(payload,3,1,val);
client.publish((char *)topic.c_str(),val);
}
void pub(char * topic, float payload){
char val[12];
dtostrf(payload,3,1,val);
client.publish(topic,val);
}
void pub(char * topic, int payload){
char val[6];
sprintf(val, "%d", payload);
client.publish(topic,val);
}
void pub(char * topic, unsigned int payload){
char val[6];
sprintf(val, "%u", payload);
client.publish(topic,val);
}
void pub(char * topic, long payload){
char val[11];
sprintf(val, "%l", payload);
client.publish(topic,val);
}
void pub(char * topic, double payload){
char val[16];
sprintf(val, "%d", payload);
client.publish(topic,val);
}
void pub(String topic, unsigned long payload){
char val[11];
sprintf(val, "%lu", payload);
client.publish((char *)topic.c_str(),val);
}
bool reconnect() {
// Loop until we're reconnected
while (!client.connected()) {
trc(F("MQTT connection...")); //F function enable to decrease sram usage
if (client.connect(Gateway_Name, mqtt_user, mqtt_pass, will_Topic, will_QoS, will_Retain, will_Message)) {
trc(F("Connected to broker"));
failure_number = 0;
// Once connected, publish an announcement...
pub(will_Topic,Gateway_AnnouncementMsg,will_Retain);
// publish version
pub(version_Topic,OMG_VERSION,will_Retain);
//Subscribing to topic
if (client.subscribe(subjectMQTTtoX)) {
#ifdef ZgatewayRF
client.subscribe(subjectMultiGTWRF); // subject on which other OMG will publish, this OMG will store these msg and by the way don't republish them if they have been already published
#endif
#ifdef ZgatewayRF315
client.subscribe(subjectMultiGTWRF315);// subject on which other OMG will publish, this OMG will store these msg and by the way don't republish them if they have been already published
#endif
#ifdef ZgatewayIR
client.subscribe(subjectMultiGTWIR);// subject on which other OMG will publish, this OMG will store these msg and by the way don't republish them if they have been already published
#endif
trc(F("Subscription OK to the subjects"));
}
} else {
failure_number ++; // we count the failure
trc(F("failure_number"));
trc(failure_number);
trc(F("failed, rc="));
trc(client.state());
trc(F("try again in 5s"));
// Wait 5 seconds before retrying
delay(5000);
if (failure_number > maxMQTTretry){
trc(F("failed connecting to mqtt"));
return false;
}
}
}
return client.connected();
}
// Callback function, when the gateway receive an MQTT value on the topics subscribed this function is called
void callback(char* topic, byte* payload, unsigned int length) {
// In order to republish this payload, a copy must be made
// as the orignal payload buffer will be overwritten whilst
// constructing the PUBLISH packet.
trc(F("Hey I got a callback "));
// Allocate the correct amount of memory for the payload copy
byte* p = (byte*)malloc(length + 1);
// Copy the payload to the new buffer
memcpy(p,payload,length);
// Conversion to a printable string
p[length] = '\0';
//launch the function to treat received data if this data concern OpenMQTTGateway
if ((strstr(topic, subjectMultiGTWKey) != NULL) || (strstr(topic, subjectGTWSendKey) != NULL)) receivingMQTT(topic,(char *) p);
// Free the memory
free(p);
}
void setup()
{
//Launch serial for debugging purposes
Serial.begin(SERIAL_BAUD);
#if defined(ESP8266) || defined(ESP32)
#ifdef ESP8266
#ifndef ZgatewaySRFB // if we are not in sonoff rf bridge case we apply the ESP8266 pin optimization
Serial.end();
Serial.begin(SERIAL_BAUD, SERIAL_8N1, SERIAL_TX_ONLY);// enable on ESP8266 to free some pin
#endif
#endif
#if defined(ESPWifiManualSetup)
setup_wifi();
#else
setup_wifimanager(false);
#endif
trc(F("OpenMQTTGateway mac: "));
trc(WiFi.macAddress());
trc(F("OpenMQTTGateway ip: "));
trc(WiFi.localIP().toString());
// Port defaults to 8266
ArduinoOTA.setPort(ota_port);
// Hostname defaults to esp8266-[ChipID]
ArduinoOTA.setHostname(ota_hostname);
// No authentication by default
ArduinoOTA.setPassword(ota_password);
ArduinoOTA.onStart([]() {
trc(F("Start"));
});
ArduinoOTA.onEnd([]() {
trc(F("\nEnd"));
});
ArduinoOTA.onProgress([](unsigned int progress, unsigned int total) {
Serial.printf("Progress: %u%%\r", (progress / (total / 100)));
});
ArduinoOTA.onError([](ota_error_t error) {
Serial.printf("Error[%u]: ", error);
if (error == OTA_AUTH_ERROR) trc(F("Auth Failed"));
else if (error == OTA_BEGIN_ERROR) trc(F("Begin Failed"));
else if (error == OTA_CONNECT_ERROR) trc(F("Connect Failed"));
else if (error == OTA_RECEIVE_ERROR) trc(F("Receive Failed"));
else if (error == OTA_END_ERROR) trc(F("End Failed"));
});
ArduinoOTA.begin();
#else // In case of arduino platform
//Launch serial for debugging purposes
Serial.begin(SERIAL_BAUD);
//Begining ethernet connection in case of Arduino + W5100
setup_ethernet();
#endif
//setup LED status
pinMode(led_receive, OUTPUT);
pinMode(led_send, OUTPUT);
pinMode(led_info, OUTPUT);
digitalWrite(led_receive, LOW);
digitalWrite(led_send, LOW);
digitalWrite(led_info, LOW);
#if defined(MDNS_SD) && defined(ESP8266)
trc(F("Connecting to MQTT by mDNS without mqtt hostname"));
connectMQTTmdns();
#else
long port;
port = strtol(mqtt_port,NULL,10);
trc(port);
#ifdef mqtt_server_name // if name is defined we define the mqtt server by its name
trc(F("Connecting to MQTT with mqtt hostname"));
IPAddress mqtt_server_ip;
WiFi.hostByName(mqtt_server_name, mqtt_server_ip);
client.setServer(mqtt_server_ip, port);
trc(mqtt_server_ip.toString());
#else // if not by its IP adress
trc(F("Connecting to MQTT by IP adress"));
client.setServer(mqtt_server, port);
trc(mqtt_server);
#endif
#endif
client.setCallback(callback);
delay(1500);
lastReconnectAttempt = 0;
#ifdef ZsensorBME280
setupZsensorBME280();
#endif
#ifdef ZsensorBH1750
setupZsensorBH1750();
#endif
#ifdef ZsensorTSL2561
setupZsensorTSL2561();
#endif
#ifdef ZactuatorONOFF
setupONOFF();
#endif
#ifdef Zgateway2G
setup2G();
#endif
#ifdef ZgatewayIR
setupIR();
#endif
#ifdef ZgatewayLORA
setupLORA();
#endif
#ifdef ZgatewayRF
setupRF();
#endif
#ifdef ZgatewayRF315
setupRF315();
#endif
#ifdef ZgatewayRF2
setupRF2();
#endif
#ifdef ZgatewayPilight
setupPilight();
#endif
#ifdef ZgatewaySRFB
setupSRFB();
#endif
#ifdef ZgatewayBT
setupBT();
#endif
#ifdef ZgatewayRFM69
setupRFM69();
#endif
#ifdef ZsensorINA226
setupINA226();
#endif
#ifdef ZsensorHCSR501
setupHCSR501();
#endif
#ifdef ZsensorGPIOInput
setupGPIOInput();
#endif
#ifdef ZsensorGPIOKeyCode
setupGPIOKeyCode();
#endif
#ifdef ZactuatorFASTLED
setupFASTLED();
#endif
trc(F("MQTT_MAX_PACKET_SIZE"));
trc(MQTT_MAX_PACKET_SIZE);
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
if(MQTT_MAX_PACKET_SIZE == 128) trc(F("WRONG PUBSUBCLIENT LIBRARY USED PLEASE INSTALL THE ONE FROM OMG LIB FOLDER"));
#endif
trc(F("Setup OpenMQTTGateway end"));
}
#if defined(ESPWifiManualSetup)
void setup_wifi() {
delay(10);
int failureAttempt = 0; //DIRTY FIX ESP32 waiting for https://github.com/espressif/arduino-esp32/issues/653
WiFi.mode(WIFI_STA);
// We start by connecting to a WiFi network
trc(F("Connecting to "));
trc(wifi_ssid);
IPAddress ip_adress(ip);
IPAddress gateway_adress(gateway);
IPAddress subnet_adress(subnet);
IPAddress dns_adress(Dns);
WiFi.begin(wifi_ssid, wifi_password);
//WiFi.config(ip_adress,gateway_adress,subnet_adress,dns_adress); //Uncomment this line if you want to use advanced network config
while (WiFi.status() != WL_CONNECTED) {
delay(500);
trc(F("."));
failureAttempt++; //DIRTY FIX ESP32
if (failureAttempt > 30) setup_wifi(); //DIRTY FIX ESP32
}
trc(F("WiFi ok with manual config credentials"));
}
#elif defined(ESP8266) || defined(ESP32)
//Wifi manager parameters
//flag for saving data
bool shouldSaveConfig = true;
//do we have been connected once to mqtt
//callback notifying us of the need to save config
void saveConfigCallback () {
trc(F("Should save config"));
shouldSaveConfig = true;
}
void setup_wifimanager(bool reset_settings){
if(reset_settings) SPIFFS.format();
//read configuration from FS json
trc(F("mounting FS..."));
if (SPIFFS.begin()) {
trc(F("mounted file system"));
}else{
trc(F("failed to mount FS -> formating"));
SPIFFS.format();
if(SPIFFS.begin())
trc(F("mounted file system after formating"));
}
if (SPIFFS.exists("/config.json")) {
//file exists, reading and loading
trc(F("reading config file"));
File configFile = SPIFFS.open("/config.json", "r");
if (configFile) {
trc(F("opened config file"));
size_t size = configFile.size();
// Allocate a buffer to store contents of the file.
std::unique_ptr<char[]> buf(new char[size]);
configFile.readBytes(buf.get(), size);
DynamicJsonBuffer jsonBuffer;
JsonObject& json = jsonBuffer.parseObject(buf.get());
json.printTo(Serial);
if (json.success()) {
trc(F("\nparsed json"));
strcpy(mqtt_server, json["mqtt_server"]);
strcpy(mqtt_port, json["mqtt_port"]);
strcpy(mqtt_user, json["mqtt_user"]);
strcpy(mqtt_pass, json["mqtt_pass"]);
} else {
trc(F("failed to load json config"));
}
}
}
// The extra parameters to be configured (can be either global or just in the setup)
// After connecting, parameter.getValue() will get you the configured value
// id/name placeholder/prompt default length
WiFiManagerParameter custom_mqtt_server("server", "mqtt server", mqtt_server, 40);
WiFiManagerParameter custom_mqtt_port("port", "mqtt port", mqtt_port, 6);
WiFiManagerParameter custom_mqtt_user("user", "mqtt user", mqtt_user, 20);
WiFiManagerParameter custom_mqtt_pass("pass", "mqtt pass", mqtt_pass, 30);
//WiFiManager
//Local intialization. Once its business is done, there is no need to keep it around
WiFiManager wifiManager;
wifiManager.setConnectTimeout(WifiManager_TimeOut);
//Set timeout before going to portal
wifiManager.setConfigPortalTimeout(WifiManager_ConfigPortalTimeOut);
//set config save notify callback
wifiManager.setSaveConfigCallback(saveConfigCallback);
//set static ip
//wifiManager.setSTAStaticIPConfig(IPAddress(10,0,1,99), IPAddress(10,0,1,1), IPAddress(255,255,255,0));
//add all your parameters here
wifiManager.addParameter(&custom_mqtt_server);
wifiManager.addParameter(&custom_mqtt_port);
wifiManager.addParameter(&custom_mqtt_user);
wifiManager.addParameter(&custom_mqtt_pass);
if(reset_settings) wifiManager.resetSettings();
//set minimu quality of signal so it ignores AP's under that quality
wifiManager.setMinimumSignalQuality(MinimumWifiSignalQuality);
//fetches ssid and pass and tries to connect
//if it does not connect it starts an access point with the specified name
//and goes into a blocking loop awaiting configuration
if (!wifiManager.autoConnect(WifiManager_ssid, WifiManager_password)) {
trc(F("failed to connect and hit timeout"));
delay(3000);
//reset and try again, or maybe put it to deep sleep
#if defined(ESP8266)
ESP.reset();
#else
ESP.restart();
#endif
delay(5000);
}
//if you get here you have connected to the WiFi
trc(F("connected...yeey :)"));
//read updated parameters
strcpy(mqtt_server, custom_mqtt_server.getValue());
strcpy(mqtt_port, custom_mqtt_port.getValue());
strcpy(mqtt_user, custom_mqtt_user.getValue());
strcpy(mqtt_pass, custom_mqtt_pass.getValue());
//save the custom parameters to FS
if (shouldSaveConfig) {
trc(F("saving config"));
DynamicJsonBuffer jsonBuffer;
JsonObject& json = jsonBuffer.createObject();
json["mqtt_server"] = mqtt_server;
json["mqtt_port"] = mqtt_port;
json["mqtt_user"] = mqtt_user;
json["mqtt_pass"] = mqtt_pass;
File configFile = SPIFFS.open("/config.json", "w");
if (!configFile) {
trc(F("failed to open config file for writing"));
}
json.printTo(Serial);
json.printTo(configFile);
configFile.close();
//end save
}
}
#else // Arduino case
void setup_ethernet() {
if (gateway[0] != 0 || Dns[0]!=0)
{
trc(F("Adv eth cfg"));
Ethernet.begin(mac, ip, Dns, gateway, subnet);
}else{
trc(F("Spl eth cfg"));
Ethernet.begin(mac, ip);
}
trc(F("ip: "));
Serial.println(Ethernet.localIP());
trc(F("Eth ok"));
}
#endif
#if defined(MDNS_SD) && defined(ESP8266)
void connectMQTTmdns(){
if (!MDNS.begin("ESP_MQTT")) {
trc(F("Error setting up MDNS responder!"));
while(1){
delay(1000);
}
}
trc(F("Browsing for service MQTT "));
int n = MDNS.queryService("mqtt", "tcp");
if (n == 0) {
trc(F("no services found"));
}else {
trc(n);
trc(F(" service(s) found"));
for (int i=0; i < n; ++i) {
// Print details for each service found
trc(i + 1);
trc(MDNS.hostname(i));
trc(MDNS.IP(i).toString());
trc(MDNS.port(i));
}
if (n==1) {
trc(F("One MQTT server found setting parameters"));
client.setServer(MDNS.IP(0), int(MDNS.port(0)));
}else{
trc(F("Several MQTT servers found, please deactivate mDNS and set your default server"));
}
}
}
#endif
void loop()
{
digitalWrite(led_receive, LOW);
digitalWrite(led_info, LOW);
digitalWrite(led_send, LOW);
unsigned long now = millis();
//MQTT client connexion management
if (!client.connected()) { // not connected
if (now - lastReconnectAttempt > 5000) {
trc("client disconnected");
lastReconnectAttempt = now;
// Attempt to reconnect
#if defined(ESP8266) || defined(ESP32)
if (WiFi.status() == WL_CONNECTED){
if (reconnect()) {
lastReconnectAttempt = 0;
} else {
#if defined(ESPWifiManualSetup)
trc(F("restarting ESP"));
#ifdef ESP32
ESP.restart();
#endif
#ifdef ESP8266
ESP.reset();
#endif
#else
if (!connectedOnce) {
trc(F("reseting wifi manager"));
setup_wifimanager(true); // if we didn't connected once to mqtt we reset and start in AP mode again to have a chance to change the parameters
}
#endif
}
}else{
trc("wifi disconnected");
}
#else //other boards
if (Ethernet.linkStatus() == LinkON){
if (reconnect()) {
lastReconnectAttempt = 0;
} else {
trc(F("brk disconnected"));
}
}else{
trc("eth disconnected");
}
#endif
}
} else { //connected
// MQTT loop
connectedOnce = true;
client.loop();
#if defined(ESP8266) || defined(ESP32)
ArduinoOTA.handle();
#endif
#ifdef ZsensorBME280
MeasureTempHumAndPressure(); //Addon to measure Temperature, Humidity, Pressure and Altitude with a Bosch BME280
#endif
#ifdef ZsensorBH1750
MeasureLightIntensity(); //Addon to measure Light Intensity with a BH1750
#endif
#ifdef ZsensorTSL2561
MeasureLightIntensityTSL2561();
#endif
#ifdef ZsensorDHT
MeasureTempAndHum(); //Addon to measure the temperature with a DHT
#endif
#ifdef ZsensorINA226
MeasureINA226(); //Addon to measure the temperature with a DHT
#endif
#ifdef ZsensorHCSR501
MeasureHCSR501();
#endif
#ifdef ZsensorGPIOInput
MeasureGPIOInput();
#endif
#ifdef ZsensorGPIOKeyCode
MeasureGPIOKeyCode();
#endif
#ifdef ZsensorADC
MeasureADC(); //Addon to measure the analog value of analog pin
#endif
#ifdef ZgatewayLORA
LORAtoMQTT();
#endif
#ifdef ZgatewayRF
RFtoMQTT();
#endif
#ifdef ZgatewayRF315
RF315toMQTT();
#endif
#ifdef ZgatewayRF2
RF2toMQTT();
#endif
#ifdef ZgatewayPilight
PilighttoMQTT();
#endif
#ifdef ZgatewayBT
#ifndef ESP32
if(BTtoMQTT())
trc(F("BTtoMQTT OK"));
#endif
#endif
#ifdef ZgatewaySRFB
SRFBtoMQTT();
#endif
#ifdef ZgatewayIR
IRtoMQTT();
#endif
#ifdef Zgateway2G
if(_2GtoMQTT()){
trc(F("2GtoMQTT OK"));
}
#endif
#ifdef ZgatewayRFM69
if(RFM69toMQTT())
trc(F("RFM69toMQTT OK"));
#endif
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
stateMeasures();
#endif
#ifdef ZactuatorFASTLED
FASTLEDLoop();
#endif
}
}
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
void stateMeasures(){
unsigned long now = millis();
if (now > (timer_sys_measures + TimeBetweenReadingSYS)) {//retriving value of memory ram every TimeBetweenReadingSYS
timer_sys_measures = millis();
StaticJsonBuffer<JSON_MSG_BUFFER> jsonBuffer;
JsonObject& SYSdata = jsonBuffer.createObject();
trc(F("Uptime (s)"));
unsigned long uptime = millis()/1000;
trc(uptime);
SYSdata["uptime"] = uptime;
#if defined(ESP8266) || defined(ESP32)
uint32_t freeMem;
freeMem = ESP.getFreeHeap();
SYSdata["freeMem"] = freeMem;
long rssi = WiFi.RSSI();
SYSdata["rssi"] = rssi;
String SSID = WiFi.SSID();
SYSdata["SSID"] = SSID;
SYSdata["ip"] = ip2CharArray(WiFi.localIP());
String mac = WiFi.macAddress();
SYSdata["mac"] = (char*)mac.c_str();
#else
SYSdata["ip"] = ip2CharArray(Ethernet.localIP());
#endif
String modules = "";
#ifdef ZgatewayRF
modules = modules + ZgatewayRF;
#endif
#ifdef ZgatewayRF315
modules = modules + ZgatewayRF315;
#endif
#ifdef ZsensorBME280
modules = modules + ZsensorBME280;
#endif
#ifdef ZsensorBH1750
modules = modules + ZsensorBH1750;
#endif
#ifdef ZsensorTSL2561
modules = modules + ZsensorTSL2561;
#endif
#ifdef ZactuatorONOFF
modules = modules + ZactuatorONOFF;
#endif
#ifdef Zgateway2G
modules = modules + Zgateway2G;
#endif
#ifdef ZgatewayIR
modules = modules + ZgatewayIR;
#endif
#ifdef ZgatewayLORA
modules = modules + ZgatewayLORA;
#endif
#ifdef ZgatewayRF2
modules = modules + ZgatewayRF2;
#endif
#ifdef ZgatewayPilight
modules = modules + ZgatewayPilight;
#endif
#ifdef ZgatewaySRFB
modules = modules + ZgatewaySRFB;
#endif
#ifdef ZgatewayBT
modules = modules + ZgatewayBT;
#endif
#ifdef ZgatewayRFM69
modules = modules + ZgatewayRFM69;
#endif
#ifdef ZsensorINA226
modules = modules + ZsensorINA226;
#endif
#ifdef ZsensorHCSR501
modules = modules + ZsensorHCSR501;
#endif
#ifdef ZsensorGPIOInput
modules = modules + ZsensorGPIOInput;
#endif
#ifdef ZsensorGPIOKeyCode
modules = modules + ZsensorGPIOKeyCode;
#endif
#ifdef ZsensorGPIOKeyCode
modules = modules + ZsensorGPIOKeyCode;
#endif
#ifdef ZmqttDiscovery
modules = modules + ZmqttDiscovery;
pubMqttDiscovery();
#endif
#ifdef ZactuatorFASTLED
modules = modules + ZactuatorFASTLED;
#endif
SYSdata["modules"] = modules;
trc(SYSdata);
char JSONmessageBuffer[JSON_MSG_BUFFER];
SYSdata.printTo(JSONmessageBuffer, sizeof(JSONmessageBuffer));
pub(subjectSYStoMQTT,JSONmessageBuffer);
}
}
#endif
void storeValue(unsigned long MQTTvalue){
unsigned long now = millis();
// find oldest value of the buffer
int o = getMin();
trc(F("Min ind: "));
trc(o);
// replace it by the new one
ReceivedSignal[o][0] = MQTTvalue;
ReceivedSignal[o][1] = now;
trc(F("store code :"));
trc(String(ReceivedSignal[o][0])+"/"+String(ReceivedSignal[o][1]));
trc(F("Col: val/timestamp"));
for (int i = 0; i < array_size; i++)
{
trc(String(i) + ":" + String(ReceivedSignal[i][0])+"/"+String(ReceivedSignal[i][1]));
}
}
int getMin(){
unsigned int minimum = ReceivedSignal[0][1];
int minindex=0;
for (int i = 0; i < array_size; i++)
{
if (ReceivedSignal[i][1] < minimum) {
minimum = ReceivedSignal[i][1];
minindex = i;
}
}
return minindex;
}
bool isAduplicate(unsigned long value){
trc(F("isAdupl?"));
// check if the value has been already sent during the last time_avoid_duplicate
for (int i = 0; i < array_size;i++){
if (ReceivedSignal[i][0] == value){
unsigned long now = millis();
if (now - ReceivedSignal[i][1] < time_avoid_duplicate){ // change
trc(F("no pub. dupl"));
return true;
}
}
}
return false;
}
void receivingMQTT(char * topicOri, char * datacallback) {
StaticJsonBuffer<JSON_MSG_BUFFER> jsonBuffer;
JsonObject& jsondata = jsonBuffer.parseObject(datacallback);
if (strstr(topicOri, subjectMultiGTWKey) != NULL) // storing received value so as to avoid publishing this value if it has been already sent by this or another OpenMQTTGateway
{
trc(F("Store str"));
unsigned long data = 0;
#ifdef jsonPublishing
if (jsondata.success()) data = jsondata["value"];
#endif
#ifdef simplePublishing
data = strtoul(datacallback, NULL, 10); // we will not be able to pass values > 4294967295
#endif
if (data != 0) {
storeValue(data);
trc(F("JSON str"));
}
}
if (jsondata.success()) { // json object ok -> json decoding
#ifdef ZgatewayPilight // ZgatewayPilight is only defined with json publishing
MQTTtoPilight(topicOri, jsondata);
#endif
#ifdef jsonReceiving
#ifdef ZgatewayLORA
MQTTtoLORA(topicOri, jsondata);
#endif
#ifdef ZgatewayRF
MQTTtoRF(topicOri, jsondata);
#endif
#ifdef ZgatewayRF315
MQTTtoRF315(topicOri, jsondata);
#endif
#ifdef ZgatewayRF2
MQTTtoRF2(topicOri, jsondata);
#endif
#ifdef Zgateway2G
MQTTto2G(topicOri, jsondata);
#endif
#ifdef ZgatewaySRFB
MQTTtoSRFB(topicOri, jsondata);
#endif
#ifdef ZgatewayIR
MQTTtoIR(topicOri, jsondata);
#endif
#ifdef ZgatewayRFM69
MQTTtoRFM69(topicOri, jsondata);
#endif
#ifdef ZgatewayBT
MQTTtoBT(topicOri, jsondata);
#endif
#endif
#ifdef ZactuatorONOFF // outside the jsonpublishing macro due to the fact that we need to use simplepublishing with HA discovery
MQTTtoONOFF(topicOri, jsondata);
#endif
digitalWrite(led_send, HIGH);
#ifdef ZactuatorFASTLED
MQTTtoFASTLEDJSON(topicOri, jsondata);
#endif
} else { // not a json object --> simple decoding
#ifdef simpleReceiving
#ifdef ZgatewayLORA
MQTTtoLORA(topicOri, datacallback);
#endif
#ifdef ZgatewayRF
MQTTtoRF(topicOri, datacallback);
#endif
#ifdef ZgatewayRF315
MQTTtoRF315(topicOri, datacallback);
#endif
#ifdef ZgatewayRF2
MQTTtoRF2(topicOri, datacallback);
#endif
#ifdef Zgateway2G
MQTTto2G(topicOri, datacallback);
#endif
#ifdef ZgatewaySRFB
MQTTtoSRFB(topicOri, datacallback);
#endif
#ifdef ZgatewayIR
MQTTtoIR(topicOri, datacallback);
#endif
#ifdef ZgatewayRFM69
MQTTtoRFM69(topicOri, datacallback);
#endif
#endif
#ifdef ZactuatorONOFF
MQTTtoONOFF(topicOri, datacallback);
#endif
digitalWrite(led_send, HIGH);
#ifdef ZactuatorFASTLED
MQTTtoFASTLED(topicOri, datacallback);
#endif
}
//YELLOW OFF
digitalWrite(led_send, HIGH);
}
Reference in new issue View Git Blame Copy Permalink