h2zero
45a0184320
This will enable using button on the gateway to switch any controlled attached actuators/relays when pressed. Adds the following macros: - ACTUATOR_ON; 0 or 1, set to the output level of the gpio pin to turn the actuator on. - ACTUATOR_ONOFF_DEFAULT; ACTUATOR_ON or !ACTUATOR_ON, set to the state desired on reset. - ACTUATOR_BUTTON_TRIGGER_LEVEL; 0 or 1, set to the sensing level which to detect a button press to change the actuator state.
91 lines
2.8 KiB
Arduino
91 lines
2.8 KiB
Arduino
/*
|
|
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
|
|
|
|
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
|
|
Send and receiving command by MQTT
|
|
|
|
Output GPIO defined to High or Low
|
|
|
|
Copyright: (c)Florian ROBERT
|
|
|
|
Contributors:
|
|
- 1technophile
|
|
|
|
This file is part of OpenMQTTGateway.
|
|
|
|
OpenMQTTGateway is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
OpenMQTTGateway is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
#include "User_config.h"
|
|
|
|
#ifdef ZactuatorONOFF
|
|
|
|
# ifdef jsonReceiving
|
|
void MQTTtoONOFF(char* topicOri, JsonObject& ONOFFdata) {
|
|
if (cmpToMainTopic(topicOri, subjectMQTTtoONOFF)) {
|
|
Log.trace(F("MQTTtoONOFF json data analysis" CR));
|
|
int boolSWITCHTYPE = ONOFFdata["cmd"] | 99;
|
|
int gpio = ONOFFdata["gpio"] | ACTUATOR_ONOFF_GPIO;
|
|
if (boolSWITCHTYPE != 99) {
|
|
Log.notice(F("MQTTtoONOFF boolSWITCHTYPE ok: %d" CR), boolSWITCHTYPE);
|
|
Log.notice(F("GPIO number: %d" CR), gpio);
|
|
pinMode(gpio, OUTPUT);
|
|
digitalWrite(gpio, boolSWITCHTYPE);
|
|
// we acknowledge the sending by publishing the value to an acknowledgement topic
|
|
pub(subjectGTWONOFFtoMQTT, ONOFFdata);
|
|
} else {
|
|
Log.error(F("MQTTtoONOFF failed json read" CR));
|
|
}
|
|
}
|
|
}
|
|
# endif
|
|
|
|
# ifdef simpleReceiving
|
|
void MQTTtoONOFF(char* topicOri, char* datacallback) {
|
|
if ((cmpToMainTopic(topicOri, subjectMQTTtoONOFF))) {
|
|
Log.trace(F("MQTTtoONOFF" CR));
|
|
char* endptr = NULL;
|
|
long gpio = strtol(datacallback, &endptr, 10);
|
|
if (datacallback == endptr)
|
|
gpio = ACTUATOR_ONOFF_GPIO;
|
|
|
|
Log.notice(F("GPIO number: %d" CR), gpio);
|
|
pinMode(gpio, OUTPUT);
|
|
|
|
bool ON = false;
|
|
if (strstr(topicOri, ONKey) != NULL)
|
|
ON = true;
|
|
if (strstr(topicOri, OFFKey) != NULL)
|
|
ON = false;
|
|
|
|
digitalWrite(gpio, ON);
|
|
// we acknowledge the sending by publishing the value to an acknowledgement topic
|
|
char b = ON;
|
|
pub(subjectGTWONOFFtoMQTT, &b);
|
|
}
|
|
}
|
|
# endif
|
|
|
|
void ActuatorButtonTrigger() {
|
|
uint8_t level = !digitalRead(ACTUATOR_ONOFF_GPIO);
|
|
char* level_string = "ON";
|
|
if (level != ACTUATOR_ON) {
|
|
level_string = "OFF";
|
|
}
|
|
Log.trace(F("Actuator triggered %s by button" CR), level_string);
|
|
digitalWrite(ACTUATOR_ONOFF_GPIO, level);
|
|
pub(subjectGTWONOFFtoMQTT, level_string);
|
|
}
|
|
|
|
#endif
|