Florian
d8dba15a81
* factoring of the publishing function * integration of json publishing to MQTT * receiving and transcode json messages from mqtt * replace the TRACE runtime condition by a buildtime one so as to decrease program size * remove retainFlag parameter not necessary for the moment * Increase the scope of tests for arduino mega and esp32 * Update arduinojson library to 5.13.3 * add macros to choose between simple or json publishing or both * differentiate build test for ATmega2560 * correct wrong sprintf definition * change IDE version for continuous integration * let default warning level in arduino ide * correct pins for ESP32 * reorganize user_config
52 lines
2.0 KiB
C
52 lines
2.0 KiB
C
/*
|
|
OpenMQTTGateway - ESP8266 or Arduino program for home automation
|
|
|
|
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
|
|
Send and receiving command by MQTT
|
|
|
|
This gateway enables to set your parameters for the 2G gateway
|
|
|
|
Copyright: (c)Florian ROBERT
|
|
|
|
This file is part of OpenMQTTGateway.
|
|
|
|
OpenMQTTGateway is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
OpenMQTTGateway is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/*-------------------2G topics & parameters----------------------*/
|
|
//433Mhz MQTT Subjects and keys
|
|
#define subjectMQTTto2G Base_Topic Gateway_Name "/commands/MQTTto2G"
|
|
#define subject2GtoMQTT Base_Topic Gateway_Name "/2GtoMQTT"
|
|
#define subjectGTW2GtoMQTT Base_Topic Gateway_Name "/2GtoMQTT"
|
|
#define _2GPhoneKey "PHO_" // phone number define the phone number to send the SMS MQTT->2G
|
|
|
|
#define _2G_MODULE_BAUDRATE 9600
|
|
#define _2G_MIN_SIGNAL 30
|
|
#define _2G_MAX_SIGNAL 1000
|
|
|
|
/*-------------------PIN DEFINITIONS----------------------*/
|
|
#ifdef ESP8266
|
|
#define _2G_TX_PIN D6 //D6 to A6 RX,
|
|
#define _2G_RX_PIN D7 //D7 to A6 TX
|
|
#define _2G_PWR_PIN D5 // connect a MOSFET to power on and off your A6/7 module
|
|
#elif defined(ESP32)
|
|
#define _2G_TX_PIN 16 //D16 to A6 RX,
|
|
#define _2G_RX_PIN 17 //D17 to A6 TX
|
|
#define _2G_PWR_PIN 5 // connect a MOSFET to power on and off your A6/7 module
|
|
#else
|
|
#define _2G_TX_PIN 6 //D6 to A6 RX,
|
|
#define _2G_RX_PIN 7 //D7 to A6 TX
|
|
#define _2G_PWR_PIN 5 // connect a MOSFET to power on and off your A6/7 module
|
|
#endif
|