f5b33104ef
Getting started: - New 15-minute Getting Started guide featuring the two most popular tracks (BLE on esp32dev-ble, RF on lilygo-rtl_433), with broker setup and a verification step - Sidebar restructured around the new-user journey; upload options numbered by ease; Gitpod upload method removed Home page: - VitePress hero with clear actions, larger hero image - How-it-works pipeline diagram shared as a component (responsive via container queries), use-case grid, bigger video tiles without the image lightbox, refreshed press coverage list, functions pills - Support section pointing to Theengs Bridge and github.com/sponsors/1technophile Upload flow: - Decision-oriented upload landing page (journey strip, method cards, comparison table) - Pre-flight checklist and driver troubleshooting on the web installer - Guided environment picker (bridge + hardware wizard) replacing the filter chips, with manifest-verified recommendations - Post-flash next-steps card linking to the portal and verification Board images: - custom_img key in environments.ini and board photos for all web-flashable environments (licenses recorded); private prod_env.ini environments excluded from boards-info.json Corrections: - RF frequency coverage stated as 433/315/868/915MHz - Removed references to the retired compatible.openmqttgateway.com site (BLE list is decoder.theengs.io), the discontinued Theengs Plug, and the private sponsor forum Claude-Session: https://claude.ai/code/session_01TYysQW8tpmt1dWWuzKhTLi Co-authored-by: Florian <1technophile@users.noreply.github.com> Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
1.2 KiB
1.2 KiB
Sensors
Compatible sensors
| Module | Purpose |
|---|---|
| DHT11 | Temperature, Humidity |
| DHT22 | Temperature, Humidity |
| HCSR501 | PIR |
| BH1750 | Digital light |
| BME280 | Temperature, Humidity, Pressure |
| BMP280 | Temperature, Pressure |
| C-37, YL-83, HM-RD | Leak, Water |
| HTU21 | Temperature, Humidity |
| GPIO Input | Inputs |
| GPIO KeyCode | Keycode |
| INA226 | Current, Voltage |
| MQ2 | Gas (flammable) |
| TEMT6000 | Luminosity |
| TSL2561 | Luminosity |
Pinout
| Module | Arduino Pin | ESP8266 Pin | ESP32 Pin |
|---|---|---|---|
| Analog reading | A0 | A0 | A0 |
| BH1750 SDA | A4 | D2 | 21 |
| BH1750 SCL | A5 | D1 | 22 |
| BME280/BMP280 SDA | A4 | D2 | 21 |
| BME280/BMP280 SCL | A5 | D1 | 22 |
| C-37, YL-83, HM-RD | A0 + D14 | A0 + D14 | A7 + D14 |
| DHT11/22 | D8 | D1 | 16 |
| HC-SR501/HC-SR505 | 7 | D5 | 5 |
| HTU21 SDA | A4 | D2 | 21 |
| HTU21 SCL | A5 | D1 | 22 |
| INA226 SDA | A4 | D2 | 21 |
| INA226 SCL | A5 | D1 | 22 |
| MQ02 | A0 + D4 | A0 + D4 | A0 + D4 |
| TEMT6000 | A0 | A0 | A0 |
| TSL2561 SDA | A4 | D2 | 21 |
| TSL2561 SCL | A5 | D1 | 22 |
Vcc pin of the board and the Module to a 3.3V or 5V supply source depending on sensor voltage requirement. Ground pins of the board and the Module to the ground of the supply source.