Florian
a3603c6a78
With only one control that enables the publication of all the advertisement data, default: false Note that if the sensor is not recognized, we will no longer publish its advertisement data unless the control is true. This is for the sake of traffic reduction.
1496 lines
44 KiB
INI
1496 lines
44 KiB
INI
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
; ENVIRONMENTS LIST ;
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
;List of environments that can be build ;
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
|
|
[env:rfbridge]
|
|
platform = ${com.esp8266_platform}
|
|
board = esp8285
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager8266}
|
|
${libraries.esp8266_mdns}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewaySRFB="SRFB"'
|
|
'-DLED_INFO=13'
|
|
'-DLED_INFO_ON=0'
|
|
'-DGateway_Name="OpenMQTTGateway_SRFB"'
|
|
'-UMQTTsetMQTT' ;We remove this function to have sufficient FLASH available for OTA, you should also use ESPWifiManualSetup to save flash memory and have OTA working
|
|
board_build.flash_mode = dout
|
|
board_build.ldscript = eagle.flash.1m64.ld ;this frees more space for firmware uplad via OTA.
|
|
;extra_scripts = scripts/compressFirmware.py ;uncomment this to compress the firmware. This helps updating e.g. Sonoff RF Bridge via OTA flash by saving space for the uploaded firmware.
|
|
custom_description = RF gateway for the Sonoff RF Bridge relying on the internal decoder
|
|
custom_hardware = RFBridge v1
|
|
|
|
[env:rfbridge-direct]
|
|
platform = espressif8266@^2
|
|
board = esp8285
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager8266}
|
|
${libraries.esppilight}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayPilight="Pilight"'
|
|
'-DRF_RECEIVER_GPIO=4'
|
|
'-DRF_EMITTER_GPIO=5'
|
|
'-DLED_INFO=13'
|
|
'-DLED_INFO_ON=0'
|
|
'-DZsensorGPIOInput="GPIOInput"'
|
|
'-DINPUT_GPIO=0'
|
|
'-DGateway_Name="OpenMQTTGateway_SRFB_Direct"'
|
|
board_build.flash_mode = dout
|
|
board_build.ldscript = eagle.flash.1m64.ld ;this frees more space for firmware uplad via OTA.
|
|
;extra_scripts = scripts/compressFirmware.py ;uncomment this to compress the firmware. This helps updating e.g. Sonoff RF Bridge via OTA flash by saving space for the uploaded firmware.
|
|
custom_description = RF gateway for the Sonoff RF Bridge requiring direct hack, relying on ESPilight library, [tutorial](https://1technophile.blogspot.com/2019/04/sonoff-rf-bridge-pilight-or-how-to.html).
|
|
custom_hardware = RFBridge v1
|
|
|
|
[env:esp32dev-all-test]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32dev
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
${libraries.irremoteesp}
|
|
${libraries.lora}
|
|
${libraries.rfm69}
|
|
${libraries.rfm69spi}
|
|
${libraries.rc-switch}
|
|
${libraries.newremoteswitch}
|
|
${libraries.bme280}
|
|
${libraries.bmp180}
|
|
${libraries.htu21}
|
|
${libraries.lm75}
|
|
${libraries.ahtx0}
|
|
${libraries.unifiedsensor}
|
|
${libraries.dht}
|
|
${libraries.tsl2561}
|
|
${libraries.ina226}
|
|
${libraries.fastled}
|
|
${libraries.onewire}
|
|
${libraries.dallastemperature}
|
|
${libraries.rfWeatherStation}
|
|
${libraries.shtc3}
|
|
${libraries.rn8209}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayRF="RF"'
|
|
'-DZgatewayLORA="LORA"'
|
|
'-DZgatewayRF2="RF2"'
|
|
'-DZgatewayIR="IR"'
|
|
'-DZgatewayBT="BT"'
|
|
'-DZactuatorONOFF="ONOFF"'
|
|
'-DACTUATOR_BUTTON_TRIGGER_LEVEL=0'
|
|
'-ACTUATOR_TRIGGER=true'
|
|
'-DZactuatorFASTLED="FASTLED"'
|
|
'-DZactuatorPWM="PWM"'
|
|
'-DZsensorINA226="INA226"'
|
|
'-DZsensorHCSR501="HCSR501"'
|
|
'-DZsensorADC="ADC"'
|
|
'-DZsensorBH1750="BH1750"'
|
|
'-DZsensorBME280="BME280"'
|
|
'-DBME280Correction=-3.4'
|
|
'-DZsensorHTU21="HTU21"'
|
|
'-DZsensorAHTx0="AHTx0"'
|
|
'-DZsensorTSL2561="TSL2561"'
|
|
'-DZsensorDHT="DHT"'
|
|
'-DZsensorDS1820="DS1820"'
|
|
'-DZgatewayRFM69="RFM69"'
|
|
'-DZsensorGPIOInput="GPIOInput"'
|
|
'-DZsensorGPIOKeyCode="GPIOKeyCode"'
|
|
'-DZsensorRN8209="RN8209"'
|
|
'-DMAX_TEMP_ACTUATOR=80'
|
|
'-DZgatewayWeatherStation="WeatherStation"'
|
|
'-DsimplePublishing=true'
|
|
'-DWM_PWD_FROM_MAC=true'
|
|
'-DUSE_MAC_AS_GATEWAY_NAME=true'
|
|
|
|
[env:esp32dev-rf]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32dev
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.rc-switch}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayRF="RF"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_RF"'
|
|
custom_description = RF gateway using RCSwitch library
|
|
|
|
[env:esp32dev-pilight]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32dev
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.esppilight}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayPilight="Pilight"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_Pilight"'
|
|
custom_description = RF gateway using ESPilight library
|
|
|
|
[env:esp32dev-pilight-cc1101]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32dev
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.esppilight}
|
|
${libraries.smartrc-cc1101-driver-lib}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayPilight="Pilight"'
|
|
'-DZradioCC1101="CC1101"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_Pilight-CC1101"'
|
|
custom_description = Gateway using ESPilight library only, need CC1101
|
|
|
|
[env:esp32dev-somfy-cc1101]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32dev
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.somfy_remote}
|
|
${libraries.smartrc-cc1101-driver-lib}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZactuatorSomfy="Somfy"'
|
|
'-DZradioCC1101="CC1101"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_Somfy-CC1101"'
|
|
custom_description = Gateway using Somfy Remote library, need CC1101
|
|
|
|
[env:esp32dev-pilight-somfy-cc1101]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32dev
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.esppilight}
|
|
${libraries.somfy_remote}
|
|
${libraries.smartrc-cc1101-driver-lib}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayPilight="Pilight"'
|
|
'-DZactuatorSomfy="Somfy"'
|
|
'-DZradioCC1101="CC1101"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_Pilight-Somfy-CC1101"'
|
|
custom_description = Gateway using Somfy Remote and ESPilight library, need CC1101
|
|
|
|
[env:esp32dev-weatherstation]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32dev
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.rfWeatherStation}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayWeatherStation="WeatherStation"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_WeatherStation"'
|
|
custom_description = Gateway to retrieve weather station data Ventus W174/W132 (tested), Auriol H13726, Hama EWS 1500, Meteoscan W155/W160 using WeatherStationDataRx
|
|
|
|
[env:esp32dev-gf-sun-inverter]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32dev
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.emodbus}
|
|
${libraries.gfSunInverter}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayGFSunInverter="GFSunInverter"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_GFSunInverter"'
|
|
custom_description = RS232 reading of GridFree Sun Inverter
|
|
|
|
[env:esp32dev-ir]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32dev
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.irremoteesp}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayIR="IR"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_IR"'
|
|
custom_description = Infrared (Emitting and receiving) using IRremoteESP8266
|
|
|
|
[env:esp32dev-ble]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32dev
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DLED_SEND_RECEIVE=2'
|
|
'-DLED_SEND_RECEIVE_ON=0'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_BLE"'
|
|
custom_description = Regular BLE gateway with one scan every 55s per default
|
|
|
|
[env:esp32dev-ble-openhab]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32dev
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DLED_SEND_RECEIVE=2'
|
|
'-DLED_SEND_RECEIVE_ON=0'
|
|
'-DOpenHABDiscovery=true'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_BLE_OH"'
|
|
custom_description = BLE gateway with one scan every 55s per default and OpenHAB discovery
|
|
|
|
[env:esp32dev-ble-mqtt-undecoded]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32dev
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DLED_SEND_RECEIVE=2'
|
|
'-DLED_SEND_RECEIVE_ON=0'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_BLE"'
|
|
'-DMQTTDecodeTopic="undecoded"'
|
|
custom_description = BLE gateway with the decoding offloaded to Theengs Gateway
|
|
|
|
[env:esp32dev-ble-aws]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32dev
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-UZmqttDiscovery="HADiscovery"'
|
|
'-DZgatewayBT="BT"'
|
|
'-DLED_SEND_RECEIVE=2'
|
|
'-DLED_SEND_RECEIVE_ON=0'
|
|
'-DMQTT_SECURE_DEFAULT=true'
|
|
'-DMQTT_SECURE_SELF_SIGNED'
|
|
'-DMQTT_CERT_VALIDATE_DEFAULT=true'
|
|
'-DMQTT_SERVER="xxxxxxxxxxxxx-ats.iot.eu-west-2.amazonaws.com"'
|
|
'-DMQTT_PORT="8883"'
|
|
'-DMQTT_USER=""'
|
|
'-DMQTT_PASS=""'
|
|
'-DAWS_IOT=true'
|
|
custom_description = BLE gateway with AWS integration capability
|
|
|
|
[env:esp32dev-ble-cont]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32dev
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DLED_SEND_RECEIVE=2'
|
|
'-DLED_SEND_RECEIVE_ON=0'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_BLE_C"'
|
|
'-DTimeBtwRead=0'
|
|
'-DScan_duration=1000'
|
|
'-DAttemptBLEConnect=false'
|
|
custom_description = Regular BLE gateway with continuous scan and no BLE connection attempt per default
|
|
|
|
[env:esp32feather-ble]
|
|
platform = ${com.esp32_platform}
|
|
board = featheresp32
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DLED_SEND_RECEIVE=13'
|
|
'-DLED_SEND_RECEIVE_ON=0'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_FTH_BLE"'
|
|
custom_description = BLE Gateway
|
|
custom_hardware = ESP32 Feather Adafruit
|
|
|
|
[env:esp32-lolin32lite-ble]
|
|
platform = ${com.esp32_platform}
|
|
board = lolin32
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DLED_SEND_RECEIVE=22'
|
|
'-DLED_SEND_RECEIVE_ON=0'
|
|
'-DGateway_Name="OpenMQTTGateway_LOLIN32LITE_BLE"'
|
|
;; Low power parameters, uncomment and fill credentials
|
|
; '-DDEFAULT_LOW_POWER_MODE=2'
|
|
; '-DTimeBtwRead=155000'
|
|
; '-DScan_duration=2000'
|
|
; '-DAttemptBLEConnect=false'
|
|
; '-DActiveBLEScan=false'
|
|
; '-DESPWifiManualSetup=true'
|
|
; '-DMQTT_USER="lolin-esp32"'
|
|
; '-DMQTT_PASS="your_password"'
|
|
; '-DMQTT_SERVER="192.168.1.17"'
|
|
; '-Dwifi_ssid="WIFI_SSID"'
|
|
; '-Dwifi_password="WIFI_PASSWORD"'
|
|
custom_description = Suitable for low power with BLE gateway, [tutorial](https://1technophile.blogspot.com/2021/04/low-power-esp32-ble-gateway.html)
|
|
custom_hardware = LOLIN 32 Lite
|
|
|
|
[env:esp32-olimex-gtw-ble-eth]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32-gateway
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DLED_INFO=33'
|
|
'-DLED_INFO_ON=1'
|
|
'-DESP32_ETHERNET=true'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_OLM_GTWE"'
|
|
custom_description = BLE gateway using ethernet, need to be configured through PIO
|
|
custom_hardware = OLIMEX ESP32 Gateway
|
|
|
|
[env:esp32-olimex-gtw-ble-poe]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32-poe
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DESP32_ETHERNET=true'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_OLM_POE"'
|
|
custom_description = BLE gateway using ethernet, need to be configured through PIO
|
|
custom_hardware = OLIMEX ESP32 Gateway with POE
|
|
|
|
[env:esp32-olimex-gtw-ble-poe-iso]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32-poe-iso
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DESP32_ETHERNET=true'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_OLM_POE"'
|
|
custom_description = BLE gateway using ethernet, need to be configured through PIO
|
|
custom_hardware = OLIMEX ESP32 Gateway with POE and ISO
|
|
|
|
[env:esp32-wt32-eth01-ble-eth]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32-gateway
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DESP32_ETHERNET=true'
|
|
'-DETH_PHY_ADDR=1'
|
|
'-DETH_PHY_POWER=16'
|
|
'-DETH_CLK_MODE=ETH_CLOCK_GPIO0_IN'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_WT32-ETH01"'
|
|
custom_description = BLE gateway using ethernet, need to be configured through PIO
|
|
custom_hardware = WT32
|
|
|
|
[env:esp32-olimex-gtw-ble-wifi]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32-gateway
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DLED_INFO=33'
|
|
'-DLED_INFO_ON=1'
|
|
'-DTRIGGER_GPIO=34'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_OLM_GTWW"'
|
|
custom_description = BLE gateway using wifi
|
|
custom_hardware = OLIMEX ESP32 Gateway
|
|
|
|
[env:esp32-m5stick-ble]
|
|
platform = ${com.esp32_platform}
|
|
board = m5stack-core-esp32
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
${libraries.irremoteesp}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DZgatewayIR="IR"'
|
|
'-DLED_SEND_RECEIVE=19'
|
|
'-DLED_SEND_RECEIVE_ON=1'
|
|
'-DTRIGGER_GPIO=35'
|
|
'-DIR_EMITTER_GPIO=17'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_M5STICK_BLE_IR"'
|
|
board_upload.speed = 921600
|
|
custom_description = Expandable module with BLE gateway, display, and little IR emitter
|
|
custom_hardware = M5Stick Grey
|
|
|
|
[env:esp32-m5stack-ble]
|
|
platform = ${com.esp32_platform}
|
|
board = m5stack-core-esp32
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.m5stack}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DZsensorGPIOInput="GPIOInput"'
|
|
'-DZboardM5STACK="M5Stack"'
|
|
'-DLED_SEND_RECEIVE=15'
|
|
'-DTRIGGER_GPIO=37'
|
|
'-DSLEEP_BUTTON=38'
|
|
'-DINPUT_GPIO=39'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_M5STACK_BLE"'
|
|
board_upload.speed = 921600
|
|
custom_description = Expandable module with BLE gateway and display
|
|
custom_hardware = M5Stack Core
|
|
|
|
[env:esp32-m5tough-ble]
|
|
platform = ${com.esp32_platform}
|
|
board = m5stack-core-esp32
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.m5tough}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DZboardM5TOUGH="M5Tough"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_M5TOUGH_BLE"'
|
|
board_upload.speed = 921600
|
|
custom_description = Expandable module with BLE gateway and display, suitable for outdoor
|
|
custom_hardware = M5Tough rugged
|
|
|
|
[env:esp32-m5stick-c-ble]
|
|
platform = ${com.esp32_platform}
|
|
board = m5stick-c
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
${libraries.m5stickc}
|
|
${libraries.irremoteesp}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DZgatewayIR="IR"'
|
|
'-DZsensorGPIOInput="GPIOInput"'
|
|
'-DZboardM5STICKC="M5StickC"'
|
|
'-DACTUATOR_ONOFF_GPIO=10'
|
|
'-DINPUT_GPIO=37'
|
|
'-DLED_SEND_RECEIVE=10'
|
|
'-DLED_SEND_RECEIVE_ON=0'
|
|
'-DSLEEP_BUTTON=39'
|
|
'-DTRIGGER_GPIO=39'
|
|
'-DIR_EMITTER_INVERTED=true'
|
|
'-DIR_EMITTER_GPIO=9'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_M5STICK_C_BLE_IR"'
|
|
board_upload.speed = 1500000
|
|
custom_description = Expandable module with BLE gateway, display, and little IR emitter
|
|
custom_hardware = M5Stick C
|
|
|
|
[env:esp32-m5stick-cp-ble]
|
|
platform = ${com.esp32_platform}
|
|
board = pico32
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
${libraries.m5stickcp}
|
|
${libraries.irremoteesp}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DZgatewayIR="IR"'
|
|
'-DZsensorGPIOInput="GPIOInput"'
|
|
'-DZboardM5STICKCP="M5StickCP"'
|
|
'-DACTUATOR_ONOFF_GPIO=10'
|
|
'-DINPUT_GPIO=37'
|
|
'-DLED_SEND_RECEIVE=10'
|
|
'-DLED_SEND_RECEIVE_ON=0'
|
|
'-DSLEEP_BUTTON=39'
|
|
'-DTRIGGER_GPIO=39'
|
|
'-DIR_EMITTER_INVERTED=true'
|
|
'-DIR_EMITTER_GPIO=9'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_M5STICK_CP_BLE_IR"'
|
|
board_upload.speed = 1500000
|
|
custom_description = Expandable module with BLE gateway, display, and little IR emitter
|
|
custom_hardware = M5Stick CP
|
|
|
|
[env:esp32-m5atom-matrix]
|
|
platform = ${com.esp32_platform}
|
|
board = pico32
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
${libraries.irremoteesp}
|
|
${libraries.fastled}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DZgatewayIR="IR"'
|
|
'-DTRIGGER_GPIO=39'
|
|
'-DSLEEP_BUTTON=39'
|
|
'-DIR_EMITTER_GPIO=12'
|
|
'-DFASTLED_IND_DATA_GPIO=27,GRB'
|
|
'-DFASTLED_IND_TYPE=WS2812'
|
|
'-DFASTLED_IND_NUM_LEDS=25'
|
|
'-DRGB_INDICATORS=true'
|
|
'-DGateway_Name="OpenMQTTGateway_ATOM_M"'
|
|
board_upload.speed = 1500000
|
|
custom_description = Compact enclosure ESP32 with BLE gateway
|
|
custom_hardware = M5 ATOM Matrix
|
|
|
|
[env:esp32-m5atom-lite]
|
|
platform = ${com.esp32_platform}
|
|
board = pico32
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
${libraries.irremoteesp}
|
|
${libraries.fastled}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DZgatewayIR="IR"'
|
|
'-DTRIGGER_GPIO=39'
|
|
'-DSLEEP_BUTTON=39'
|
|
'-DIR_EMITTER_GPIO=12'
|
|
'-DFASTLED_IND_DATA_GPIO=27,GRB'
|
|
'-DFASTLED_IND_TYPE=WS2812'
|
|
'-DFASTLED_IND_NUM_LEDS=1'
|
|
'-DRGB_INDICATORS=true'
|
|
'-DGateway_Name="OpenMQTTGateway_ATOM_L"'
|
|
board_upload.speed = 1500000
|
|
custom_description = Compact enclosure ESP32 with BLE gateway
|
|
custom_hardware = M5 ATOM Lite
|
|
|
|
[env:esp32dev-rtl_433]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32dev
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.rtl_433_ESP}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
; *** OpenMQTTGateway Config ***
|
|
;'-UZmqttDiscovery' ; disables MQTT Discovery
|
|
'-DvalueAsATopic=true' ; MQTT topic includes model and device
|
|
'-DLOG_LEVEL=LOG_LEVEL_TRACE'
|
|
'-DGateway_Name="OpenMQTTGateway_rtl_433_ESP"'
|
|
; *** OpenMQTTGateway Modules ***
|
|
'-DZgatewayRTL_433="rtl_433"'
|
|
'-DZradioCC1101="CC1101"'
|
|
; *** rtl_433_ESP Options ***
|
|
; '-DRTL_DEBUG=4' ; rtl_433 verbose mode
|
|
; '-DRTL_VERBOSE=58' ; LaCrosse TX141-Bv2, TX141TH-Bv2, TX141-Bv3, TX141W, TX145wsdth sensor
|
|
; '-DRAW_SIGNAL_DEBUG=true' ; display raw received messages
|
|
; '-DMEMORY_DEBUG=true' ; display memory usage information
|
|
'-DDEMOD_DEBUG=true' ; display signal debug info
|
|
; '-DMY_DEVICES=true' ; subset of devices
|
|
'-DPUBLISH_UNPARSED=true' ; publish unparsed signal details
|
|
; '-DRSSI_THRESHOLD=12' ; Apply a delta of 12 to average RSSI level
|
|
; '-DAVERAGE_RSSI=5000' ; Display RSSI floor ( Average of 5000 samples )
|
|
'-DSIGNAL_RSSI=true' ; Display during signal receive
|
|
'-DNO_DEAF_WORKAROUND=true'
|
|
; *** RF Module Options ***
|
|
'-DRF_CC1101="CC1101"' ; CC1101 Transceiver Module
|
|
; '-DRF_MODULE_CS=5' ; pin to be used as chip select
|
|
'-DRF_MODULE_GDO0=12' ; CC1101 pin GDO0
|
|
'-DRF_MODULE_GDO2=27' ; CC1101 pin GDO2
|
|
; *** RadioLib Options ***
|
|
; '-DRADIOLIB_DEBUG=true'
|
|
; '-DRADIOLIB_VERBOSE=true'
|
|
custom_description = Gateway using RTL_433_ESP library, need CC1101
|
|
|
|
[env:heltec-rtl_433]
|
|
platform = ${com.esp32_platform}
|
|
board = heltec_wifi_lora_32_V2
|
|
; ~/.platformio/packages/framework-arduinoespressif32/variants/.../pins_arduino.h
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ssd1306}
|
|
${libraries.rtl_433_ESP}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
; *** OpenMQTTGateway Config ***
|
|
;'-UZmqttDiscovery' ; disables MQTT Discovery
|
|
'-DvalueAsATopic=true' ; MQTT topic includes model and device
|
|
'-DGateway_Name="OpenMQTTGateway_heltec_rtl_433_ESP"'
|
|
; *** OpenMQTTGateway Modules ***
|
|
'-DZgatewayRTL_433="rtl_433"'
|
|
'-DZradioSX127x="SX127x"'
|
|
; *** ssd1306 Display Options ***
|
|
'-DZdisplaySSD1306="HELTEC_SSD1306"'
|
|
; '-DLOG_TO_LCD=false' ; Enable log to LCD
|
|
; '-DJSON_TO_LCD=true'
|
|
; '-DLOG_LEVEL_LCD=LOG_LEVEL_NOTICE'
|
|
; '-DDISPLAY_IDLE_LOGO=false'
|
|
; '-DDISPLAY_METRIC=false'
|
|
custom_description = Gateway using RTL_433_ESP and RadioLib
|
|
|
|
[env:lilygo-rtl_433]
|
|
platform = ${com.esp32_platform}
|
|
board = ttgo-lora32-v21
|
|
; ~/.platformio/packages/framework-arduinoespressif32/variants/.../pins_arduino.h
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ssd1306}
|
|
${libraries.rtl_433_ESP}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
; *** OpenMQTTGateway Config ***
|
|
;'-UZmqttDiscovery' ; disables MQTT Discovery
|
|
'-DvalueAsATopic=true' ; MQTT topic includes model and device
|
|
'-DGateway_Name="OpenMQTTGateway_lilygo_rtl_433_ESP"'
|
|
; *** OpenMQTTGateway Modules ***
|
|
'-DZgatewayRTL_433="rtl_433"'
|
|
'-DZradioSX127x="SX127x"'
|
|
; *** ssd1306 Display Options ***
|
|
'-DZdisplaySSD1306="LilyGo_SSD1306"'
|
|
; '-DLOG_TO_LCD=true' ; Enable log to LCD
|
|
; '-DJSON_TO_LCD=true'
|
|
; '-DLOG_LEVEL_LCD=LOG_LEVEL_NOTICE'
|
|
; '-DDISPLAY_IDLE_LOGO=false'
|
|
; '-DDISPLAY_METRIC=false'
|
|
custom_description = For ESP32, Gateway using RTL_433_ESP and RadioLib
|
|
custom_hardware = ESP32 LILYGO LoRa32 V2.1
|
|
|
|
[env:esp32dev-multi_receiver]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32dev
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.rc-switch}
|
|
${libraries.smartrc-cc1101-driver-lib}
|
|
${libraries.rtl_433_ESP}
|
|
${libraries.esppilight}
|
|
${libraries.newremoteswitch}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayRF="RF"'
|
|
'-DZgatewayRF2="RF2"'
|
|
'-DZgatewayRTL_433="RTL_433"'
|
|
'-DZgatewayPilight="Pilight"'
|
|
'-DZradioCC1101="CC1101"'
|
|
'-DGateway_Name="OpenMQTTGateway_multi_receiver"'
|
|
'-DvalueAsATopic=true' ; MQTT topic includes model and device (rtl_433) or protocol and id (RF and PiLight)
|
|
; '-DDEFAULT_RECEIVER=1' ; Default receiver to enable on startup
|
|
; *** RF Module Options ***
|
|
'-DRF_CC1101="CC1101"' ; CC1101 Transceiver Module
|
|
'-DRF_MODULE_CS=5' ; pin to be used as chip select
|
|
'-DRF_MODULE_GDO0=12' ; CC1101 pin GDO0
|
|
'-DRF_MODULE_GDO2=27' ; CC1101 pin GDO2
|
|
; '-DRF_MODULE_INIT_STATUS=true' ; Display transceiver config during startup
|
|
custom_description = Multi RF library with the possibility to switch between ESPilight, RTL_433_ESP, NewRemoteSwitch and RCSwitch, need CC1101
|
|
|
|
[env:tinypico-ble]
|
|
platform = ${com.esp32_platform}
|
|
board = tinypico
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.fastled}
|
|
${libraries.decoder}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_TINYPICO_BLE"'
|
|
'-DRGB_LED_POWER=13'
|
|
'-DFASTLED_IND_DATA_GPIO=2,12,RGB'
|
|
'-DFASTLED_IND_TYPE=APA102'
|
|
'-DFASTLED_IND_NUM_LEDS=1'
|
|
board_build.flash_mode = dio
|
|
custom_description = BLE gateway
|
|
custom_hardware = ESP32 TinyPICO
|
|
|
|
[env:ttgo-lora32-v1-868]
|
|
platform = ${com.esp32_platform}
|
|
board = ttgo-lora32-v1
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.lora}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayLORA="LORA"'
|
|
'-DLORA_BAND=868E6'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_LORA"'
|
|
custom_description = LORA communication 868Mhz using arduino-LoRA
|
|
custom_hardware= ESP32 TTGO LORA V1
|
|
|
|
[env:ttgo-lora32-v1-915]
|
|
platform = ${com.esp32_platform}
|
|
board = ttgo-lora32-v1
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.lora}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayLORA="LORA"'
|
|
'-DLORA_BAND=915E6'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_LORA"'
|
|
custom_description = LORA communication 915Mhz using arduino-LoRA
|
|
custom_hardware= ESP32 TTGO LORA V1
|
|
|
|
[env:ttgo-t-beam]
|
|
# See version pinout differences here
|
|
# https://www.thethingsnetwork.org/forum/t/big-esp32-sx127x-topic-part-3/18436
|
|
platform = ${com.esp32_platform}
|
|
board = ttgo-t-beam
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
${libraries.lora}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayLORA="LORA"'
|
|
'-DZgatewayBT="BT"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_BLE_LORA"'
|
|
'-DLED_SEND_RECEIVE=21' # T-BEAM board V0.5
|
|
# '-DLED_SEND_RECEIVE=14' # T-BEAM board V0.7
|
|
# '-DLED_SEND_RECEIVE=4' # T-BEAM board V1.0+
|
|
'-DTimeLedON=0.05'
|
|
'-DLED_SEND_RECEIVE_ON=1' # Set 0 for board V1.0+
|
|
# for V0.5 and V0.7 ONLY (V1.0+ as onboard AXP202 dedicated chip, need driver)
|
|
# it's a 100K/100K divider (so 2 divider) and connected to GPIO35
|
|
'-DZsensorADC="ADC"'
|
|
'-DADC_GPIO=35'
|
|
'-DADC_DIVIDER=2'
|
|
# Reading battery level every minutes should be more than enought
|
|
'-DTimeBetweenReadingADC=60000'
|
|
custom_description = BLE gateway with battery holder
|
|
custom_hardware = TTGO T BEAM
|
|
|
|
[env:heltec-wifi-lora-32-868] ; Heltec ESP32 Board with SSD1306 display
|
|
platform = ${com.esp32_platform}
|
|
board = heltec_wifi_lora_32
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.lora}
|
|
${libraries.ssd1306}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
; *** OpenMQTTGateway Modules ***
|
|
'-DZgatewayLORA="LORA"'
|
|
'-DLORA_BAND=868E6'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_LORA"'
|
|
'-DLED_SEND_RECEIVE=25'
|
|
'-DTimeLedON=0.1'
|
|
'-DLED_SEND_RECEIVE_ON=1'
|
|
; *** ssd1306 Display Options ***
|
|
'-DZdisplaySSD1306="HELTEC_SSD1306"'
|
|
; '-DLOG_TO_LCD=true' ; Enable log to LCD
|
|
; '-DJSON_TO_LCD=true'
|
|
; '-DLOG_LEVEL_LCD=LOG_LEVEL_NOTICE'
|
|
; '-DDISPLAY_IDLE_LOGO=false'
|
|
; '-DDISPLAY_METRIC=false'
|
|
custom_description = LORA communication 868Mhz using arduino-LoRA
|
|
custom_hardware = ESP32 HELTEC LORA32
|
|
|
|
[env:heltec-wifi-lora-32-915] ; Heltec ESP32 Board with SSD1306 display
|
|
platform = ${com.esp32_platform}
|
|
board = heltec_wifi_lora_32
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.lora}
|
|
${libraries.ssd1306}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
; *** OpenMQTTGateway Modules ***
|
|
'-DZgatewayLORA="LORA"'
|
|
'-DLORA_BAND=915E6'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_LORA"'
|
|
'-DLED_SEND_RECEIVE=25'
|
|
'-DTimeLedON=0.1'
|
|
'-DLED_SEND_RECEIVE_ON=1'
|
|
; *** ssd1306 Display Options ***
|
|
'-DZdisplaySSD1306="HELTEC_SSD1306"'
|
|
; '-DLOG_TO_LCD=true' ; Enable log to LCD
|
|
; '-DJSON_TO_LCD=true'
|
|
; '-DLOG_LEVEL_LCD=LOG_LEVEL_NOTICE'
|
|
; '-DDISPLAY_IDLE_LOGO=false'
|
|
; '-DDISPLAY_METRIC=false'
|
|
custom_description = LORA communication 915Mhz using arduino-LoRA
|
|
custom_hardware = ESP32 HELTEC LORA32
|
|
|
|
; For testing only, not for production use
|
|
[env:shelly-plus1]
|
|
platform = ${com.esp32_solo_platform}
|
|
board = esp32-solo1
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.ble}
|
|
${libraries.wifimanager32}
|
|
${libraries.decoder}
|
|
build_flags =
|
|
${env.build_flags}
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DTimeBtwRead=100'
|
|
'-DScan_duration=3000'
|
|
'-DTRIGGER_GPIO=25'
|
|
'-DZactuatorONOFF="ONOFF"'
|
|
'-DACTUATOR_ON=1'
|
|
'-DACTUATOR_OFF=0'
|
|
'-DACTUATOR_TRIGGER=true'
|
|
'-DZsensorGPIOInput="GPIOInput"'
|
|
'-DINPUT_GPIO=4'
|
|
'-DGPIO_INPUT_TYPE=INPUT'
|
|
'-DACTUATOR_ONOFF_GPIO=26'
|
|
'-DZsensorADC="ADC"'
|
|
'-DADC_GPIO=32'
|
|
;'-DMAX_TEMP_ACTUATOR=70' ; uncomment to activate automatic switch off following ESP32 temperature measurement (experimental)
|
|
'-DUSE_MAC_AS_GATEWAY_NAME'
|
|
'-DFRAMEWORK_ARDUINO_SOLO1'
|
|
'-DGATEWAY_MANUFACTURER="Shelly"'
|
|
'-DGATEWAY_MODEL="SPLUS1"'
|
|
custom_description = BLE, Relay control, Switch
|
|
custom_hardware = Shelly Plus 1
|
|
|
|
[env:nodemcuv2-all-test]
|
|
platform = ${com.esp8266_platform}
|
|
board = nodemcuv2
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager8266}
|
|
;${libraries.esppilight}
|
|
${libraries.irremoteesp}
|
|
${libraries.rfm69}
|
|
${libraries.rfm69spi}
|
|
; ${libraries.rc-switch}
|
|
; ${libraries.newremoteswitch}
|
|
${libraries.bme280}
|
|
${libraries.bmp180}
|
|
;${libraries.htu21}
|
|
${libraries.lm75}
|
|
${libraries.ahtx0}
|
|
${libraries.unifiedsensor}
|
|
${libraries.dht}
|
|
${libraries.tsl2561}
|
|
;${libraries.ina226}
|
|
${libraries.esp8266_mdns}
|
|
${libraries.wire}
|
|
${libraries.fastled}
|
|
${libraries.onewire}
|
|
${libraries.dallastemperature}
|
|
;${libraries.rfWeatherStation}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
; '-DZgatewayRF="RF"'
|
|
; '-DZgatewayRF2="RF2"'
|
|
'-DZgatewayIR="IR"'
|
|
; '-DZgatewayPilight="Pilight"'
|
|
'-DZactuatorONOFF="ONOFF"'
|
|
; '-DZactuatorFASTLED="FASTLED"'
|
|
;'-DZactuatorPWM="PWM"'
|
|
;'-DZsensorINA226="INA226"'
|
|
'-DZsensorHCSR501="HCSR501"'
|
|
'-DZsensorHCSR04="HCSR04"'
|
|
'-DZsensorADC="ADC"'
|
|
'-DZsensorBH1750="BH1750"'
|
|
'-DZsensorBME280="BME280"'
|
|
;'-DZsensorHTU21="HTU21"'
|
|
'-DZsensorAHTx0="AHTx0"'
|
|
'-DZsensorTSL2561="TSL2561"'
|
|
'-DZsensorDHT="DHT"'
|
|
'-DZsensorDS1820="DS1820"'
|
|
'-DZgatewayRFM69="RFM69"'
|
|
'-DZsensorGPIOInput="GPIOInput"'
|
|
'-DZsensorGPIOKeyCode="GPIOKeyCode"'
|
|
;'-DZgatewayWeatherStation="WeatherStation"'
|
|
'-DsimplePublishing=true'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP8266_ALL"'
|
|
board_build.flash_mode = dout
|
|
|
|
[env:nodemcuv2-fastled-test]
|
|
platform = ${com.esp8266_platform}
|
|
board = nodemcuv2
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager8266}
|
|
${libraries.fastled}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZactuatorFASTLED="FASTLED"'
|
|
'-DsimplePublishing=true'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP8266_FASTLED"'
|
|
board_build.flash_mode = dout
|
|
|
|
[env:nodemcuv2-2g]
|
|
platform = ${com.esp8266_platform}
|
|
board = nodemcuv2
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager8266}
|
|
${libraries.a6lib}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgateway2G="2G"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP8266_2G"'
|
|
board_build.flash_mode = dout
|
|
custom_description = SMS gateway, need A6/A7 GSM module
|
|
|
|
[env:nodemcuv2-ir]
|
|
platform = ${com.esp8266_platform}
|
|
board = nodemcuv2
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager8266}
|
|
${libraries.irremoteesp}
|
|
${libraries.esp8266_mdns}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayIR="IR"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP8266_IR"'
|
|
board_build.flash_mode = dout
|
|
custom_description = Infrared gateway using IRremoteESP8266
|
|
|
|
[env:nodemcuv2-rs232]
|
|
platform = ${com.esp8266_platform}
|
|
board = nodemcuv2
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager8266}
|
|
${libraries.esp8266_mdns}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayRS232="RS232"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP8266_RS232"'
|
|
board_build.flash_mode = dout
|
|
custom_description = RS232 gateway
|
|
|
|
[env:avatto-bakeey-ir]
|
|
platform = ${com.esp8266_platform}
|
|
board = esp01_1m
|
|
board_build.ldscript = eagle.flash.1m64.ld
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager8266}
|
|
${libraries.irremoteesp}
|
|
${libraries.esp8266_mdns}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayIR="IR"'
|
|
'-DTRIGGER_GPIO=13'
|
|
'-DLED_SEND_RECEIVE=4'
|
|
'-DIR_EMITTER_GPIO=14'
|
|
'-DIR_RECEIVER_GPIO=5'
|
|
'-UMQTTsetMQTT' ;We remove this function to have sufficient FLASH available for OTA, you should also use ESPWifiManualSetup and 'board_build.ldscript = eagle.flash.1m64.ld' to save flash memory and have OTA working
|
|
'-UMQTT_HTTPS_FW_UPDATE' ;We remove this function to have sufficient FLASH available for OTA, you should also use ESPWifiManualSetup and 'board_build.ldscript = eagle.flash.1m64.ld' to save flash memory and have OTA working
|
|
'-DGateway_Name="OpenMQTTGateway_AVATTO_IR"'
|
|
board_build.flash_mode = dout
|
|
custom_description = IR gateway bi directional
|
|
custom_hardware = Avatto Bakey IR first version, [tutorial](https://1technophile.blogspot.com/2020/07/avatto-s06-ir-gateway-compatible-with.html)
|
|
|
|
[env:nodemcuv2-rf]
|
|
platform = ${com.esp8266_platform}
|
|
board = nodemcuv2
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager8266}
|
|
${libraries.rc-switch}
|
|
${libraries.esp8266_mdns}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayRF="RF"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP8266_RF"'
|
|
board_build.flash_mode = dout
|
|
custom_description = The historic RF gateway using RCSwitch library
|
|
|
|
[env:nodemcuv2-rf-cc1101]
|
|
platform = ${com.esp8266_platform}
|
|
board = nodemcuv2
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager8266}
|
|
${libraries.rc-switch}
|
|
${libraries.smartrc-cc1101-driver-lib}
|
|
${libraries.esp8266_mdns}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayRF="RF"'
|
|
'-DZradioCC1101="CC1101"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP8266_RF-CC1101"'
|
|
board_build.flash_mode = dout
|
|
custom_description = RF gateway using RCSwitch library with CC1101
|
|
|
|
[env:nodemcuv2-somfy-cc1101]
|
|
platform = ${com.esp8266_platform}
|
|
board = nodemcuv2
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager8266}
|
|
${libraries.somfy_remote}
|
|
${libraries.smartrc-cc1101-driver-lib}
|
|
${libraries.esp8266_mdns}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZactuatorSomfy="Somfy"'
|
|
'-DZradioCC1101="CC1101"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP8266_Somfy-CC1101"'
|
|
board_build.flash_mode = dout
|
|
custom_description = Somfy RF gateway using Somfy Remote library, need CC1101
|
|
|
|
[env:manual-wifi-test]
|
|
platform = ${com.esp8266_platform}
|
|
board = nodemcuv2
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager8266}
|
|
${libraries.rc-switch}
|
|
${libraries.esp8266_mdns}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayRF="RF"'
|
|
'-DESPWifiManualSetup=true'
|
|
'-DGateway_Name="OpenMQTTGateway_TEST_MANUAL_WIFI"'
|
|
board_build.flash_mode = dout
|
|
|
|
[env:openhab-test]
|
|
platform = ${com.esp8266_platform}
|
|
board = nodemcuv2
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager8266}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DOpenHABDiscovery=true'
|
|
'-DGateway_Name="OpenMQTTGateway_TEST_OPENHAB"'
|
|
board_build.flash_mode = dout
|
|
|
|
[env:nodemcuv2-mqtt-fw-test]
|
|
platform = ${com.esp8266_platform}
|
|
board = nodemcuv2
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager8266}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DMQTT_SECURE_SELF_SIGNED'
|
|
'-DGateway_Name="OpenMQTTGateway_TEST_MQTT_FW"'
|
|
board_build.flash_mode = dout
|
|
|
|
[env:rf-wifi-gateway]
|
|
platform = ${com.esp8266_platform}
|
|
board = nodemcuv2
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager8266}
|
|
${libraries.rc-switch}
|
|
${libraries.esp8266_mdns}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayRF="RF"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP8266_RF_WIFI_GW"'
|
|
'-DRF_RECEIVER_GPIO=5'
|
|
board_build.flash_mode = dout
|
|
custom_description = RF gateway for USB stick using RCSwitch
|
|
custom_hardware = RF Wifi USB stick, [tutorial](https://1technophile.blogspot.com/2019/09/hack-of-rf-wifi-gateway-usb-stick.html)
|
|
|
|
[env:nodemcuv2-rf2]
|
|
platform = ${com.esp8266_platform}
|
|
board = nodemcuv2
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager8266}
|
|
${libraries.newremoteswitch}
|
|
${libraries.esp8266_mdns}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayRF2="RF2"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP8266_RF2"'
|
|
board_build.flash_mode = dout
|
|
custom_description = KAKU RF gateway using NewRemoteSwitch library
|
|
|
|
[env:nodemcuv2-rf2-cc1101]
|
|
platform = ${com.esp8266_platform}
|
|
board = nodemcuv2
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager8266}
|
|
${libraries.newremoteswitch}
|
|
${libraries.smartrc-cc1101-driver-lib}
|
|
${libraries.esp8266_mdns}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayRF2="RF2"'
|
|
'-DZradioCC1101="CC1101"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP8266_RF2-CC1101"'
|
|
board_build.flash_mode = dout
|
|
custom_description = KAKU RF gateway using NewRemoteSwitch library, need CC1101
|
|
|
|
[env:nodemcuv2-pilight]
|
|
platform = espressif8266@^2
|
|
board = nodemcuv2
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager8266}
|
|
${libraries.esppilight}
|
|
${libraries.esp8266_mdns}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayPilight="Pilight"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP8266_Pilight"'
|
|
board_build.flash_mode = dout
|
|
custom_description = Gateway using ESPilight without the need of CC1101
|
|
|
|
[env:nodemcuv2-weatherstation]
|
|
platform = ${com.esp8266_platform}
|
|
board = nodemcuv2
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager8266}
|
|
${libraries.rfWeatherStation}
|
|
${libraries.esp8266_mdns}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayWeatherStation="WeatherStationDataRx"'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP8266_RF3"'
|
|
board_build.flash_mode = dout
|
|
custom_description = RF gateway using WeatherStationDataRx library
|
|
|
|
[env:sonoff-basic]
|
|
platform = ${com.esp8266_platform}
|
|
board = esp8285
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager8266}
|
|
${libraries.esp8266_mdns}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZactuatorONOFF="ONOFF"'
|
|
'-DZsensorGPIOInput="GPIOInput"'
|
|
'-DACTUATOR_ONOFF_GPIO=12'
|
|
'-DINPUT_GPIO=0'
|
|
'-DACTUATOR_ON=0'
|
|
'-DACTUATOR_ONOFF_DEFAULT=ACTUATOR_ON'
|
|
'-DACTUATOR_BUTTON_TRIGGER_LEVEL=0'
|
|
'-ACTUATOR_TRIGGER=true'
|
|
'-DGateway_Name="OpenMQTTGateway_SONOFF_RELAY"'
|
|
board_build.flash_mode = dout
|
|
custom_description = Basic Sonoff wifi relay
|
|
custom_hardware = Sonoff Basic R1, R2
|
|
|
|
[env:sonoff-basic-rfr3]
|
|
platform = ${com.esp8266_platform}
|
|
board = esp8285
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager8266}
|
|
${libraries.rc-switch}
|
|
${libraries.esp8266_mdns}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZactuatorONOFF="ONOFF"'
|
|
'-DZsensorGPIOInput="GPIOInput"'
|
|
'-DACTUATOR_ONOFF_GPIO=12'
|
|
'-DINPUT_GPIO=0'
|
|
'-DACTUATOR_ON=0'
|
|
'-DACTUATOR_ONOFF_DEFAULT=ACTUATOR_ON'
|
|
'-DACTUATOR_BUTTON_TRIGGER_LEVEL=0'
|
|
'-ACTUATOR_TRIGGER=true'
|
|
'-DRF_RECEIVER_GPIO=4'
|
|
'-DZgatewayRF="RF"'
|
|
'-DGateway_Name="OpenMQTTGateway_SONOFF_BASIC_RFR3"'
|
|
board_build.flash_mode = dout
|
|
custom_description = Wifi relay and RF receiver using RCSwitch library, [tutorial](https://1technophile.blogspot.com/2019/08/new-sonoff-rfr3-as-433tomqtt-gateway.html)
|
|
custom_hardware = Sonoff Basic RFR3, [tutorial](https://1technophile.blogspot.com/2019/08/new-sonoff-rfr3-as-433tomqtt-gateway.html)
|
|
|
|
[env:atmega-all-test]
|
|
platform = ${com.atmelavr_platform}
|
|
board = megaatmega2560
|
|
lib_deps =
|
|
${com-arduino.lib_deps}
|
|
${libraries.irremote}
|
|
${libraries.rfm69}
|
|
${libraries.rfm69spi}
|
|
${libraries.rfm69_low-power}
|
|
${libraries.rc-switch}
|
|
${libraries.newremoteswitch}
|
|
${libraries.bme280}
|
|
${libraries.bmp180}
|
|
${libraries.htu21}
|
|
${libraries.ahtx0}
|
|
${libraries.unifiedsensor}
|
|
${libraries.dht}
|
|
${libraries.tsl2561}
|
|
${libraries.a6lib}
|
|
${libraries.ina226}
|
|
${libraries.fastled}
|
|
${libraries.onewire}
|
|
${libraries.dallastemperature}
|
|
${libraries.rfWeatherStation}
|
|
${libraries.stl}
|
|
build_flags =
|
|
${com-arduino.build_flags}
|
|
'-DZgatewayRF="RF"'
|
|
'-DZgatewayRF="RF315"'
|
|
'-DZgatewayRF2="RF2"'
|
|
'-DZgatewayIR="IR"'
|
|
'-DZactuatorONOFF="ONOFF"'
|
|
'-DZactuatorFASTLED="FASTLED"'
|
|
'-DZactuatorPWM="PWM"'
|
|
'-DZsensorINA226="INA226"'
|
|
'-DZsensorHCSR501="HCSR501"'
|
|
'-DZsensorADC="ADC"'
|
|
'-DZsensorBH1750="BH1750"'
|
|
'-DZsensorBME280="BME280"'
|
|
'-DZsensorHTU21="HTU21"'
|
|
'-DZsensorAHTx0="AHTx0"'
|
|
'-DZsensorTSL2561="TSL2561"'
|
|
'-DZsensorDHT="DHT"'
|
|
'-DZsensorDS1820="DS1820"'
|
|
'-DZgatewayRFM69="RFM69"'
|
|
'-DZgatewayWeatherStation="WeatherStation"'
|
|
'-DZsensorGPIOInput="GPIOInput"'
|
|
;'-DZsensorGPIOKeyCode="GPIOKeyCode"'
|
|
'-DZmqttDiscovery="HADiscovery"'
|
|
'-DsimplePublishing=true'
|
|
'-DGateway_Name="OpenMQTTGateway_ATMEGA_ALL"'
|
|
|
|
[env:uno-rf]
|
|
platform = ${com.atmelavr_platform}
|
|
board = uno
|
|
lib_deps =
|
|
${com-arduino.lib_deps}
|
|
${libraries.rc-switch}
|
|
build_flags =
|
|
${com-arduino-low-memory.build_flags}
|
|
'-DZgatewayRF="RF"'
|
|
'-DGateway_Name="OMG_1_RF"'
|
|
'-DDISABLE_LOGGING'
|
|
custom_description = RF gateway based on RCSwitch
|
|
|
|
[env:uno-fastled]
|
|
platform = ${com.atmelavr_platform}
|
|
board = uno
|
|
lib_deps =
|
|
${com-arduino.lib_deps}
|
|
${libraries.fastled}
|
|
build_flags =
|
|
${com-arduino-low-memory.build_flags}
|
|
'-DGateway_Name="OMG_1_FL"'
|
|
'-DZactuatorFASTLED="FASTLED"'
|
|
custom_description = FastLed control
|
|
|
|
[env:esp32dev-ble-datatest]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32dev
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DLED_SEND_RECEIVE=2'
|
|
'-DLED_SEND_RECEIVE_ON=0'
|
|
'-DpubBLEManufacturerData=true'
|
|
'-DpubBLEAdvData=true'
|
|
'-DpubBLEServiceUUID=true'
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_BLE"'
|
|
custom_description = Default BLE gateway with additional servicedata, manufacturerdata and service uuid for analysing decoding issues
|
|
|
|
[env:esp32s3-dev-c1-ble]
|
|
platform = ${com.esp32_c3_s3_platform}
|
|
board = esp32-s3-devkitc-1
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
${libraries.fastled}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DFASTLED_IND_DATA_GPIO=48'
|
|
'-DFASTLED_IND_TYPE=NEOPIXEL'
|
|
'-DFASTLED_IND_NUM_LEDS=1'
|
|
'-DRGB_INDICATORS=true'
|
|
'-DNO_INT_TEMP_READING=true' ; Internal temperature reading not building on ESP32 C3 or S3
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_BLE"'
|
|
custom_description = BLE gateway on the S3
|
|
|
|
[env:esp32c3-dev-m1-ble]
|
|
platform = ${com.esp32_c3_s3_platform}
|
|
board = esp32-c3-devkitm-1
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.decoder}
|
|
${libraries.fastled}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DFASTLED_IND_DATA_GPIO=8'
|
|
'-DFASTLED_IND_TYPE=NEOPIXEL'
|
|
'-DFASTLED_IND_NUM_LEDS=1'
|
|
'-DRGB_INDICATORS=true'
|
|
'-DNO_INT_TEMP_READING=true' ; Internal temperature reading not building on ESP32 C3 or S3
|
|
'-DGateway_Name="OpenMQTTGateway_ESP32_BLE"'
|
|
custom_description = BLE gateway on the C3
|
|
|
|
[env:thingpulse-espgateway]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32dev
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.fastled}
|
|
${libraries.decoder}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DLED_SEND_RECEIVE=2'
|
|
'-DLED_SEND_RECEIVE_ON=0'
|
|
'-DpubBLEServiceUUID=true'
|
|
'-DGateway_Name="OpenMQTTGateway_THINGPULSE_BLE"'
|
|
'-DFASTLED_IND_DATA_GPIO=32,GRB'
|
|
'-DFASTLED_IND_TYPE=WS2812'
|
|
'-DFASTLED_IND_NUM_LEDS=4'
|
|
'-DFASTLED_INFO_LED=0'
|
|
'-DFASTLED_SEND_RECEIVCE_LED=1'
|
|
'-DFASTLED_ERROR_LED=2'
|
|
'-DFASTLED_BRIGHTNESS=255'
|
|
'-DRGB_INDICATORS=true'
|
|
; '-DsimplePublishing=true'
|
|
custom_description = BLE Gateway using Wifi
|
|
custom_hardware = ThingPulse gateway single ESP32
|
|
|
|
[env:thingpulse-espgateway-ethernet]
|
|
platform = ${com.esp32_platform}
|
|
board = esp32dev
|
|
board_build.partitions = min_spiffs.csv
|
|
lib_deps =
|
|
${com-esp.lib_deps}
|
|
${libraries.wifimanager32}
|
|
${libraries.ble}
|
|
${libraries.fastled}
|
|
${libraries.decoder}
|
|
build_flags =
|
|
${com-esp.build_flags}
|
|
'-DZgatewayBT="BT"'
|
|
'-DLED_SEND_RECEIVE=2'
|
|
'-DLED_SEND_RECEIVE_ON=0'
|
|
'-DpubBLEServiceUUID=true'
|
|
'-DGateway_Name="OpenMQTTGateway_THINGPULSE_ETH_BLE"'
|
|
'-DESP32_ETHERNET=true'
|
|
'-DETH_PHY_TYPE=ETH_PHY_LAN8720'
|
|
'-DETH_PHY_ADDR=0'
|
|
'-DETH_PHY_POWER=5'
|
|
'-DETH_PHY_MDC=23'
|
|
'-DETH_PHY_MDIO=18'
|
|
'-DETH_CLK_MODE=ETH_CLOCK_GPIO16_OUT'
|
|
'-DFASTLED_IND_DATA_GPIO=32,GRB'
|
|
'-DFASTLED_IND_TYPE=WS2812'
|
|
'-DFASTLED_IND_NUM_LEDS=4'
|
|
'-DFASTLED_INFO_LED=0'
|
|
'-DFASTLED_SEND_RECEIVCE_LED=1'
|
|
'-DFASTLED_ERROR_LED=2'
|
|
'-DFASTLED_BRIGHTNESS=255'
|
|
'-DRGB_INDICATORS=true'
|
|
; '-DsimplePublishing=true'
|
|
custom_description = BLE Gateway using ethernet, requires PIO configuration
|
|
custom_hardware = ThingPulse gateway single ESP32
|