Florian
441ab1c0b7
* some minor correction after coadcy checks * Put serial communication speed as a parameter in user_config.h * complete gateway file receiving ok sending ko #32 * add rfm69 to CI * change receiver key and minor improvments #32 now ok on receiving and sending with RFM69 * add schema and tested pinout for RFM69/RF/IR wiring #32 * RFM69 library add * Implement newremoteswitchlibrary for KlikAanKlikUit / ClickOnClickOff protocol #3 * add dependency for CI and link to the library * compilation error for arduino correction * Sketch size decrease * remove nano from CI * Divide user_config into one file per gateway/sensor for lisibility
139 lines
4.5 KiB
Arduino
139 lines
4.5 KiB
Arduino
/*
|
|
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
|
|
|
|
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
|
|
Send and receiving command by MQTT
|
|
|
|
This is the Light Meter Addon:
|
|
- Measures ambient Light Intensity in Lux (lx), Foot Candela (ftcd) and Watt/m^2 (wattsm2)
|
|
- Required Hardware Module: BH1750
|
|
|
|
Connection Schemata:
|
|
--------------------
|
|
|
|
BH1750 ------> Arduino Uno ----------> ESP8266
|
|
==============================================
|
|
Vcc ---------> 5V -------------------> Vu (5V)
|
|
GND ---------> GND ------------------> GND
|
|
SCL ---------> Pin A5 ---------------> D1
|
|
SDA ---------> Pin A4 ---------------> D2
|
|
ADD ---------> N/C (Not Connected) --> N/C (Not Connected)
|
|
|
|
Copyright: (c) Hans-Juergen Dinges
|
|
|
|
This file is part of OpenMQTTGateway.
|
|
|
|
OpenMQTTGateway is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
OpenMQTTGateway is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifdef ZsensorBH1750
|
|
#include "math.h" // Library for trig and exponential functions
|
|
#include "Wire.h" // Library for communication with I2C / TWI devices
|
|
|
|
void setupZsensorBH1750()
|
|
{
|
|
Wire.begin();
|
|
Wire.beginTransmission(BH1750_i2c_addr);
|
|
Wire.write(0x10); // Set resolution to 1 Lux
|
|
Wire.endTransmission();
|
|
delay(300);
|
|
}
|
|
|
|
// void loop()
|
|
void MeasureLightIntensity()
|
|
{
|
|
if (millis() > (timebh1750 + TimeBetweenReadingBH1750)) {//retriving value of Lux, FtCd and Wattsm2 from BH1750
|
|
timebh1750 = millis();
|
|
unsigned int i=0;
|
|
static float persistedll;
|
|
static float persistedlf;
|
|
static float persistedlw;
|
|
unsigned int Lux;
|
|
float FtCd;
|
|
float Wattsm2;
|
|
|
|
// Check if reads failed and exit early (to try again).
|
|
Wire.beginTransmission(BH1750_i2c_addr);
|
|
Wire.requestFrom(BH1750_i2c_addr, 2);
|
|
while(Wire.available()) //
|
|
{
|
|
i <<=8;
|
|
i|= Wire.read();
|
|
}
|
|
if (Wire.endTransmission() != 0 ) {
|
|
trc(F("Failed to read from LightSensor BH1750!"));
|
|
}else{
|
|
|
|
// Calculate the Values
|
|
Lux = i/1.2; // Convert to Lux
|
|
FtCd = Lux/10.764;
|
|
Wattsm2 = Lux/683.0;
|
|
|
|
/*
|
|
Useful Information ;-)
|
|
lux (lx) # 1 lx = 1 lm/m² = 1 cd·sr·m⁻².
|
|
meter-candle (m-cd) # 1 m·cd = 1 lx = 1 lm/m² = 1 cd·sr·m⁻².
|
|
centimeter-candle (cm-sd) # 1 m·cd = 1 lx = 1 lm/m² = 1 cd·sr·m⁻².
|
|
foot-candle (ft-c) #
|
|
phot (ph) # 1 ph = 1 lm/cm² = 10,000 lm/m² - 10,000 lx = 10 klx
|
|
nox (nx) # 1 nox = 1 millilux
|
|
candela steradin/meter2(cd·sr·m⁻²) # 1 lx = 1 lm/m² = 1 cd·sr·m⁻²
|
|
lumen/meter2 (lm·m⁻²) # 1 lx = 1 lm/m² = 1 cd·sr·m⁻²
|
|
lumen/centimeter2 (lm·cm⁻²) # 1 lm/cm² = 10,000 lx = 10,000 cd·sr·m⁻²
|
|
lumen/foot2 (lm·ft⁻²) # (lm·ft⁻²)
|
|
watt/centimeter2 at 555nm (W·cm⁻²) #
|
|
*/
|
|
|
|
// Generate Lux
|
|
if(Lux != persistedll || bh1750_always){
|
|
char lux[7];
|
|
sprintf(lux,"%u",Lux);
|
|
trc(F("Sending Lux to MQTT"));
|
|
trc(String(lux));
|
|
client.publish(LUX,lux);
|
|
}else{
|
|
trc(F("Same lux don't send it"));
|
|
}
|
|
|
|
// Generate FtCd
|
|
if(FtCd != persistedlf || bh1750_always){
|
|
char ftcd[7];
|
|
dtostrf(FtCd,4,2,ftcd);
|
|
trc(F("Sending FtCd to MQTT"));
|
|
trc(String(ftcd));
|
|
client.publish(FTCD,ftcd);
|
|
}else{
|
|
trc(F("Same ftcd don't send it"));
|
|
}
|
|
|
|
// Generate Watts/m2
|
|
if(Wattsm2 != persistedlw || bh1750_always){
|
|
char wattsm2[7];
|
|
dtostrf(Wattsm2,6,4,wattsm2);
|
|
trc(F("Sending Wattsm2 to MQTT"));
|
|
trc(String(wattsm2));
|
|
client.publish(WATTSM2,wattsm2);
|
|
}else{
|
|
trc(F("Same wattsm2 don't send it"));
|
|
}
|
|
|
|
}
|
|
persistedll = Lux;
|
|
persistedlf = FtCd;
|
|
persistedlw = Wattsm2;
|
|
}
|
|
}
|
|
|
|
#endif
|