chriz/OpenMQTT-Gateway
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 5 Wiki Activity
Files
7df23d4e3e85c6ee8fe814e8d48321a8198e5262
OpenMQTT-Gateway/platformio.ini
T
FlorianandClaude Opus 5 5fdaddadaf [RF] Fix CC1101 on Arduino core 3.x: bump SmartRC to V3.0.2 + init before probe (#2353) 
On the platform we ship (pioarduino 55.03.39 / arduino-esp32 3.3.9) the pinned
SmartRC-CC1101-Driver-Lib v2.5.7 does not work with the CC1101 at all. Core 3.x's
peripheral manager owns SCK/MISO/MOSI once SPI.begin() has run, so the driver's
digitalWrite() calls on those pins become silent no-ops, and it starts and stops
the SPI bus around every single register access (LSatan/SmartRC-CC1101-Driver-Lib#176).

Bench result on an ESP32 DevKit + CC1101 running esp32dev-pilight-cc1101: setup
hangs in the driver's unbounded `while(digitalRead(MISO_PIN));` before any C1101
log line is emitted, and TG1WDT reboots the board in a loop. The same build on
espressif32@6.8.1 (core 2.0.17) initialises normally, so this is the core, not
the wiring. Every ZradioCC1101 ESP32 environment is affected: Pilight, RF, RF2
and Somfy. The RTL_433 CC1101 path goes through RadioLib and is unaffected.

V3.0.x re-engineered the SPI core for ESP32: gpio_get_level() with a timeout
instead of the unbounded digitalRead() wait, SPI.begin() once instead of per
transaction, and no digitalWrite() on peripheral-owned pins. It also moved
SPI.begin() out of getCC1101() and into Init(), so the connection probe has to
run after Init() rather than before it — reported in #2348.

Both changes are needed together: the reorder alone does not help on core 3.x,
and V3 cannot work without it.

Verified on the bench, core 3.3.9, esp32dev-pilight-cc1101:
  N: C1101 SPI connection OK on attempt 1
  N: C1101 tuned RX to 433.92 MHz
plus a live round trip — an arctech_switch frame published to MQTTtoPilight was
transmitted and decoded back by the board's own receiver on PilighttoMQTT.

Note for review: this bumps the pin for the ESP8266 CC1101 environments too.
They are not affected by the core 3.x breakage and V3 is untested there, so the
pin may be worth splitting per environment before this lands.

Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-15 14:10:00 -05:00

231 lines
9.3 KiB
INI
Raw Blame History

; PlatformIO Project Configuration File
;
; Build options: build flags, source filter
; Upload options: custom upload port, speed and extra flags
; Library options: dependencies, extra library storages
; Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html
[platformio]
src_dir = main
include_dir = main
extra_configs =
environments.ini
tests/*_env.ini
*_env.ini
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; ENVIRONMENT CHOICE ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;Uncomment the env line corresponding to your board and modules required, ;
;you can also adapt the modules by removing the corresponding lines in the env detail ;
; if you go to the build flag section of your env you will see that some User_config.h ;
; parameters can be overwritten here, for example the gateway name. ;
; If you want to avoid the lost of your environments at each update you can put them ;
; into a separate file called prod_env.ini, it will be automatically read by pio ;
; an example (prod_env.ini.example) is available into the same folder as this file. ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;default_envs = rfbridge
;default_envs = rfbridge-direct
;default_envs = esp32dev-all-test
;default_envs = esp32dev-rf
;default_envs = esp32dev-pilight
;default_envs = esp32dev-pilight-cc1101
;default_envs = esp32dev-somfy-cc1101
;default_envs = esp32dev-pilight-somfy-cc1101
;default_envs = esp32dev-weatherstation
;default_envs = esp32dev-gf-sun-inverter
;default_envs = esp32dev-ir
;default_envs = esp32dev-ble
;default_envs = esp32dev-ble-mqtt-undecoded
;default_envs = esp32dev-ble-aws
;default_envs = esp32feather-ble
;default_envs = esp32-lolin32lite-ble
;default_envs = esp32-olimex-gtw-ble-eth
;default_envs = esp32-olimex-gtw-ble-poe
;default_envs = esp32-olimex-gtw-ble-poe-iso
;default_envs = esp32-wt32-eth01-ble-eth
;default_envs = esp32-olimex-gtw-ble-wifi
;default_envs = esp32-m5stick-ble
;default_envs = esp32-m5stack-ble
;default_envs = esp32-m5tough-ble
;default_envs = esp32-m5stick-c-ble
;default_envs = esp32-m5stick-cp-ble
;default_envs = esp32-m5atom-matrix
;default_envs = esp32-m5atom-lite
;default_envs = esp32s3-atomS3U
;default_envs = esp32doitv1-aithinker-r01-sx1278
;default_envs = esp32dev-rtl_433
;default_envs = esp32dev-rtl_433-fsk
;default_envs = heltec-rtl_433
;default_envs = heltec-rtl_433-fsk
;default_envs = heltec-ble
;default_envs = lilygo-rtl_433
;default_envs = lilygo-rtl_433-fsk
;default_envs = lilygo-ble
;default_envs = esp32dev-multi_receiver
;default_envs = esp32dev-multi_receiver-pilight
;default_envs = tinypico-ble
;default_envs = ttgo-lora32-v1
;default_envs = ttgo-lora32-v21
;default_envs = ttgo-t-beam
;default_envs = heltec-wifi-lora-32
;default_envs = shelly-plus1
;default_envs = nodemcuv2-all-test
;default_envs = nodemcuv2-fastled-test
;default_envs = nodemcuv2-2g
;default_envs = nodemcuv2-ir
;default_envs = nodemcuv2-serial
;default_envs = avatto-bakeey-ir
;default_envs = nodemcuv2-rf
;default_envs = nodemcuv2-rf-cc1101
;default_envs = nodemcuv2-somfy-cc1101
;default_envs = manual-wifi-test
;default_envs = rf-wifi-gateway
;default_envs = nodemcuv2-rf2
;default_envs = nodemcuv2-rf2-cc1101
;default_envs = nodemcuv2-pilight
;default_envs = nodemcuv2-weatherstation
;default_envs = sonoff-basic
;default_envs = sonoff-basic-rfr3
;default_envs = atmega-all-test
;default_envs = uno-rf
;default_envs = uno-fastled
;default_envs = esp32dev-ble-datatest
;default_envs = esp32s3-dev-c1-ble
;default_envs = esp32c3-dev-m1-ble
;default_envs = airm2m_core_esp32c3
;default_envs = esp32c3-dev-c2-ble
;default_envs = lolin_c3_mini
;default_envs = thingpulse-espgateway
;default_envs = theengs-bridge
;default_envs = esp32dev-ble-idf
;default_envs = esp32s3-m5stack-stamps3
;default_envs = esp32c3-m5stamp
;default_envs = esp32c3u-m5stamp
;default_envs = lilygo-t3-s3-rtl_433
;default_envs = lilygo-t3-s3-rtl_433-fsk
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; ENVIRONMENTS PARAMETERS ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;Libraries and parameters shared accross environements ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[libraries]
arduinojson = ArduinoJson@6.18.5
arduinolog = https://github.com/1technophile/Arduino-Log/archive/6d1f14a.zip
picomqtt = PicoMQTT@1.1.1
rc-switch = https://github.com/1technophile/rc-switch/archive/98537e9.zip
newremoteswitch = https://github.com/1technophile/NewRemoteSwitch/archive/8eb980e.zip
ble = https://github.com/h2zero/NimBLE-Arduino/archive/2.5.0.zip
irremoteesp = https://github.com/theengs/IRremoteESP8266/archive/arduinov3.zip
lora = https://github.com/sandeepmistry/arduino-LoRa/archive/f4a1d27.zip
esppilight = https://github.com/theengs/ESPiLight/archive/b9dd7a1.zip
rfWeatherStation = WeatherStationDataRx@0.3.1
rfm69 = https://github.com/LowPowerLab/RFM69/archive/2e915ea.zip
rfm69spi = https://github.com/lowpowerlab/spiflash/archive/9c0c2b9.zip
rfm69_low-power = Low-Power@1.6
dht = DHT sensor library@1.3.2
unifiedsensor = Adafruit Unified Sensor@1.1.4
tsl2561 = Adafruit TSL2561@1.0.3
bme280 = SparkFun BME280@2.0.4
bmp180 = https://github.com/xelarep/SFE_BMP180/archive/efac46b.zip
htu21 = SparkFun HTU21D Humidity and Temperature Sensor Breakout@1.1.3
ahtx0 = Adafruit AHTX0
ina226 = https://github.com/jarzebski/Arduino-INA226/archive/968a684.zip
a6lib = https://github.com/h2zero/A6lib/archive/fe873c9.zip
wifimanager32 = https://github.com/h2zero/WiFiManager/archive/1ac24f4.zip
wifimanager8266 = https://github.com/tzapu/WiFiManager/archive/2.0.5-beta.zip
ethernet = Ethernet
esp8266_mdns = esp8266_mdns
wire = Wire
fastled = fastled/FastLED@3.9.15
adafruit_neopixel = adafruit/Adafruit NeoPixel@^1.11.0
onewire = https://github.com/h2zero/OneWire/archive/GPIO-fix.zip
dallastemperature = DallasTemperature
m5stickc = M5StickC@0.2.5
m5stickcp = https://github.com/m5stack/M5StickC-Plus/archive/0.1.1.zip
m5stack = M5Stack@0.4.6
m5tough = https://github.com/m5stack/M5Tough/archive/ccf49e1.zip
smartrc-cc1101-driver-lib = https://github.com/LSatan/SmartRC-CC1101-Driver-Lib/archive/v3.0.2.zip
stl = https://github.com/mike-matera/ArduinoSTL/archive/7411816.zip
shtc3 = https://github.com/sparkfun/SparkFun_SHTC3_Arduino_Library/archive/671ef7e.zip
somfy_remote=Somfy_Remote_Lib@0.3.0
rtl_433_ESP = https://github.com/NorthernMan54/rtl_433_ESP/archive/v0.5.1.zip
emodbus = miq19/eModbus@1.0.0
gfSunInverter = https://github.com/BlackSmith/GFSunInverter/archive/v1.0.1.zip
decoder = https://github.com/theengs/decoder/archive/development.zip
ssd1306 = https://github.com/ThingPulse/esp8266-oled-ssd1306/archive/f96fd6a.zip
lm75 = jeremycole/I2C Temperature Sensors derived from the LM75@^1.0.3
rn8209 = https://github.com/theengs/RN8209C-SDK/archive/arduino.zip
[env]
framework = arduino
lib_deps =
${libraries.picomqtt}
${libraries.arduinojson}
${libraries.arduinolog}
build_flags =
'-DWM_DEBUG_LEVEL=1' ;WiFi Manager log level, valid values are: DEBUG_ERROR = 0, DEBUG_NOTIFY = 1, DEBUG_VERBOSE = 2, DEBUG_DEV = 3, DEBUG_MAX = 4
-w ; supress all warnings
; -E ; generate precompiled source file (.pio/build/*/src/main.ino.cpp.o), use for precompilator debuging only (prevent compilation to succeed)
; '-DLOG_LEVEL=LOG_LEVEL_TRACE' ; Enable trace level logging
monitor_speed = 115200
extra_scripts = pre:scripts/add_mlongcalls.py
[com]
esp8266_platform = espressif8266@4.2.1
esp32_platform = https://github.com/pioarduino/platform-espressif32/releases/download/55.03.39/platform-espressif32.zip
esp32_platform_packages = framework-arduinoespressif32-libs @ https://github.com/theengs/esp32-arduino-lib-builder/releases/download/0.1.8/esp32-arduino-libs.tar.gz
esp32_solo_platform = https://github.com/tasmota/platform-espressif32/releases/download/2023.02.00/platform-espressif32.zip
atmelavr_platform = atmelavr@3.3.0
[com-esp] ; Used by all ESP8266/ESP8285 based builds
lib_deps =
${env.lib_deps}
build_flags =
${env.build_flags}
'-DENV_NAME="$PIOENV"'
'-DZmqttDiscovery="HADiscovery"'
'-DMQTTsetMQTT'
'-DMQTT_HTTPS_FW_UPDATE'
;'-DCORE_DEBUG_LEVEL=4'
[com-esp32] ; Used by all ESP32 based builds
lib_deps =
${env.lib_deps}
${libraries.wifimanager32}
build_flags =
${env.build_flags}
'-DENV_NAME="$PIOENV"'
'-DZmqttDiscovery="HADiscovery"'
'-DCONFIG_BT_NIMBLE_ROLE_PERIPHERAL_DISABLED'
'-DCONFIG_BT_NIMBLE_ROLE_BROADCASTER_DISABLED'
'-DCONFIG_NIMBLE_CPP_ADDR_FMT_UPPERCASE'
'-DMQTTsetMQTT'
'-DMQTT_HTTPS_FW_UPDATE'
;'-DCORE_DEBUG_LEVEL=4'
'-DZwebUI="WebUI"' ; enable WebUI as a default for all ESP32 builds ( the module only enables for ESP32 based builds )
'-DARDUINO_LOOP_STACK_SIZE=9600' ; The firmware upgrade options needs a large amount of free stack, ~9600
[com-arduino]
lib_deps =
${env.lib_deps}
${libraries.ethernet}
build_flags =
${env.build_flags}
'-DZmqttDiscovery="HADiscovery"'
[com-arduino-low-memory]
lib_deps =
${env.lib_deps}
${libraries.ethernet}
build_flags =
${env.build_flags}
'-DsimpleReceiving=false'
Reference in new issue View Git Blame Copy Permalink