FlorianandClaude Opus 5 77754a1fe9 [RF] Deselect a secondary CC1101 chip-select on shared-SPI boards (#2363) ...

Boards that carry two radios on one SPI bus need the unused radio's CS held
high, or it answers on MISO and corrupts every transfer to the radio that is
actually in use. Add an optional RF_MODULE_SECONDARY_CS: when defined, drive
that pin high before probing the CC1101.

Bench-proven on a dual-CC1101 ESP32 board where one radio is faulty and the
other is the working one: without the deselect the shared bus is unreliable;
with it, the working module probes cleanly on the first attempt and decodes
live 433 MHz sensors.

No effect on single-radio boards: the whole block compiles out unless
RF_MODULE_SECONDARY_CS is set.

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>

2026-08-24 08:17:15 -05:00

..

certs

[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)

2025-05-06 19:35:50 -05:00

rf

[SITE] Renew the web board presentation and the ESP32 web upload + [SYS] Security checks (#2277)

2026-03-09 07:47:30 -05:00

actuatorFASTLED.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

actuatorONOFF.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

actuatorPWM.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

actuatorSomfy.cpp

Refactor RF Configuration Management (#2245)

2025-12-07 09:56:15 -06:00

blufi.cpp

[SYS] Bound remaining MQTT/HTTP/BLE/RF inputs into fixed buffers (#2324)

2026-06-14 17:20:24 -05:00

blufiSec.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

boardM5.cpp

[SYS] Migrate M5 boards to M5Unified + M5GFX (modern platform) (#2355)

2026-08-15 16:45:35 -05:00

boardTheengs.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

commonRF.cpp

[RF] Deselect a secondary CC1101 chip-select on shared-SPI boards (#2363)

2026-08-24 08:17:15 -05:00

config_2G.h

[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)

2025-05-06 19:35:50 -05:00

config_ADC.h

[SERIAL] Enable SERIAL to X communication (#2068)

2024-09-26 06:55:26 -05:00

config_AHTx0.h

[BOARDS] Remove Arduino boards (#1929)

2024-04-10 15:48:05 -05:00

config_BH1750.h

[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)

2025-05-06 19:35:50 -05:00

config_BME280.h

[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)

2025-05-06 19:35:50 -05:00

config_BT.h

[MEM] Reduce ESP32 BLE firmware RAM usage (#2294)

2026-03-22 19:05:44 -05:00

config_C37_YL83_HMRD.h

[SERIAL] Enable SERIAL to X communication (#2068)

2024-09-26 06:55:26 -05:00

config_DHT.h

[BOARDS] Remove Arduino boards (#1929)

2024-04-10 15:48:05 -05:00

config_DS1820.h

[SERIAL] Enable SERIAL to X communication (#2068)

2024-09-26 06:55:26 -05:00

config_FASTLED.h

[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)

2025-05-06 19:35:50 -05:00

config_GFSunInverter.h

[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)

2025-05-06 19:35:50 -05:00

config_GPIOInput.h

[SERIAL] Enable SERIAL to X communication (#2068)

2024-09-26 06:55:26 -05:00

config_GPIOKeyCode.h

[SERIAL] Enable SERIAL to X communication (#2068)

2024-09-26 06:55:26 -05:00

config_HCSR04.h

[BOARDS] Remove Arduino boards (#1929)

2024-04-10 15:48:05 -05:00

config_HCSR501.h

[SERIAL] Enable SERIAL to X communication (#2068)

2024-09-26 06:55:26 -05:00

config_HTU21.h

[BOARDS] Remove Arduino boards (#1929)

2024-04-10 15:48:05 -05:00

config_INA226.h

[SERIAL] Enable SERIAL to X communication (#2068)

2024-09-26 06:55:26 -05:00

config_IR.h

[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)

2025-05-06 19:35:50 -05:00

config_LM75.h

[SERIAL] Enable SERIAL to X communication (#2068)

2024-09-26 06:55:26 -05:00

config_LORA.h

[DISC] Ram usage and flash size optimization (#2223)

2025-08-17 06:27:42 -05:00

config_M5.h

[SYS] Migrate M5 boards to M5Unified + M5GFX (modern platform) (#2355)

2026-08-15 16:45:35 -05:00

config_MQ2.h

[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)

2025-05-06 19:35:50 -05:00

config_mqttDiscovery.h

[BLE] Add BM6 Battery Monitor connection support (#2274)

2026-01-24 17:16:03 -06:00

config_ONOFF.h

[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)

2025-05-06 19:35:50 -05:00

config_PWM.h

[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)

2025-05-06 19:35:50 -05:00

config_RF.h

[RF] Change ESP8266 default RF_RECEIVER_GPIO from 0 to 4 (#2240) (#2323)

2026-06-14 16:28:01 -05:00

config_RFM69.h

[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)

2025-05-06 19:35:50 -05:00

config_RN8209.h

[SERIAL] Enable SERIAL to X communication (#2068)

2024-09-26 06:55:26 -05:00

config_SERIAL.h

[SERIAL] Make SERIAL gateway frame format (data/parity/stop bits) configurable (#2342)

2026-07-28 19:05:18 -05:00

config_SHTC3.h

[SERIAL] Enable SERIAL to X communication (#2068)

2024-09-26 06:55:26 -05:00

config_Somfy.h

[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)

2025-05-06 19:35:50 -05:00

config_SRFB.h

[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)

2025-05-06 19:35:50 -05:00

config_SSD1306.h

[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)

2025-05-06 19:35:50 -05:00

config_TEMT6000.h

[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)

2025-05-06 19:35:50 -05:00

config_Touch.h

[SERIAL] Enable SERIAL to X communication (#2068)

2024-09-26 06:55:26 -05:00

config_TSL2561.h

[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)

2025-05-06 19:35:50 -05:00

config_WeatherStation.h

[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)

2025-05-06 19:35:50 -05:00

config_WebContent.h

[BT] Default BLE AES key empty, skip decryption without a key (#2310)

2026-05-16 10:26:49 -05:00

config_WebUI.h

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

displaySSD1306.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

gateway2G.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

gatewayBLEConnect.cpp

[SITE] Renew the web board presentation and the ESP32 web upload + [SYS] Security checks (#2277)

2026-03-09 07:47:30 -05:00

gatewayBLEConnect.h

[BLE] Add BM6 Battery Monitor connection support (#2274)

2026-01-24 17:16:03 -06:00

gatewayBT.cpp

[SYS] Bound remaining MQTT/HTTP/BLE/RF inputs into fixed buffers (#2324)

2026-06-14 17:20:24 -05:00

gatewayGFSunInverter.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

gatewayIR.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

gatewayLORA.cpp

[LORA] Fix syncword not persisting after reset (#2271)

2026-01-10 11:59:41 -06:00

gatewayPilight.cpp

Refactor RF Configuration Management (#2245)

2025-12-07 09:56:15 -06:00

gatewayRF2.cpp

Refactor RF Configuration Management (#2245)

2025-12-07 09:56:15 -06:00

gatewayRF.cpp

[SITE] Renew the web board presentation and the ESP32 web upload + [SYS] Security checks (#2277)

2026-03-09 07:47:30 -05:00

gatewayRFM69.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

gatewayRTL_433.cpp

Refactor RF Configuration Management (#2245)

2025-12-07 09:56:15 -06:00

gatewaySERIAL.cpp

[SERIAL] Make SERIAL gateway frame format (data/parity/stop bits) configurable (#2342)

2026-07-28 19:05:18 -05:00

gatewaySRFB.cpp

[SYS] Bound remaining MQTT/HTTP/BLE/RF inputs into fixed buffers (#2324)

2026-06-14 17:20:24 -05:00

gatewayWeatherStation.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

main.cpp

[RF] Move RTL_433 / SX127x envs to the shipped ESP32 platform (#2360)

2026-08-23 14:15:48 -05:00

mqttDiscovery.cpp

[SYS] Migrate M5 boards to M5Unified + M5GFX (modern platform) (#2355)

2026-08-15 16:45:35 -05:00

sensorADC.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

sensorAHTx0.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

sensorBH1750.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

sensorBME280.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

sensorC37_YL83_HMRD.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

sensorDHT.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

sensorDS1820.cpp

[SITE] Renew the web board presentation and the ESP32 web upload + [SYS] Security checks (#2277)

2026-03-09 07:47:30 -05:00

sensorGPIOInput.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

sensorGPIOKeyCode.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

sensorHCSR04.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

sensorHCSR501.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

sensorHTU21.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

sensorINA226.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

sensorLM75.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

sensorMQ2.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

sensorRN8209.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

sensorSHTC3.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

sensorTEMT6000.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

sensorTouch.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

sensorTSL2561.cpp

[SYS] Reduce Logs flash footprint (#2232)

2025-08-19 09:15:41 -05:00

TheengsCommon.h

[SITE] Renew the web board presentation and the ESP32 web upload + [SYS] Security checks (#2277)

2026-03-09 07:47:30 -05:00

User_config.h

[OTA] Resolve the offered version per build environment (#2350)

2026-08-10 06:33:13 -05:00

webUI.cpp

[FIX] Restore GET route for /wi so the WiFi scan link works (#2345)

2026-08-01 07:30:26 -05:00