1technophile
ca7d5d4195
Relay ok Button press ok RF reception 433toMQTT ok To have the RF reception you need to connect D0 of SYN470 to GPIO4 of ESP8285. Instruction to follow. Do not do that if you are not confortable with soldering and don't have an electrical background.
120 lines
5.3 KiB
C
120 lines
5.3 KiB
C
/*
|
|
OpenMQTTGateway - ESP8266 or Arduino program for home automation
|
|
|
|
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
|
|
Send and receiving command by MQTT
|
|
|
|
This files enables to set your parameter for the radiofrequency gateways (ZgatewayRF and ZgatewayRF2) with RCswitch and newremoteswitch library
|
|
|
|
Copyright: (c)Florian ROBERT
|
|
|
|
This file is part of OpenMQTTGateway.
|
|
|
|
OpenMQTTGateway is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
OpenMQTTGateway is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
#ifndef config_RF_h
|
|
#define config_RF_h
|
|
|
|
#include <Arduino.h>
|
|
#include <ArduinoJson.h>
|
|
|
|
#ifdef ZgatewayRF
|
|
extern void setupRF();
|
|
extern void RFtoMQTT();
|
|
extern void MQTTtoRF(char * topicOri, char * datacallback);
|
|
extern void MQTTtoRF(char * topicOri, JsonObject& RFdata);
|
|
#endif
|
|
#ifdef ZgatewayRF2
|
|
extern void setupRF2();
|
|
extern void RF2toMQTT();
|
|
extern void MQTTtoRF2(char * topicOri, char * datacallback);
|
|
extern void MQTTtoRF2(char * topicOri, JsonObject& RFdata);
|
|
#endif
|
|
#ifdef ZgatewayPilight
|
|
extern void setupPilight();
|
|
extern void PilighttoMQTT();
|
|
extern void MQTTtoPilight(char * topicOri, char * datacallback);
|
|
extern void MQTTtoPilight(char * topicOri, JsonObject& RFdata);
|
|
#endif
|
|
/*-------------------RF topics & parameters----------------------*/
|
|
//433Mhz MQTT Subjects and keys
|
|
#define subjectMQTTtoRF Base_Topic Gateway_Name "/commands/MQTTto433"
|
|
#define subjectRFtoMQTT Base_Topic Gateway_Name "/433toMQTT"
|
|
#define subjectGTWRFtoMQTT Base_Topic Gateway_Name "/433toMQTT"
|
|
#define RFprotocolKey "433_" // protocol will be defined if a subject contains RFprotocolKey followed by a value of 1 digit
|
|
#define RFbitsKey "RFBITS_" // bits will be defined if a subject contains RFbitsKey followed by a value of 2 digits
|
|
#define repeatRFwMQTT false // do we repeat a received signal by using mqtt with RF gateway
|
|
|
|
/*
|
|
RF supported protocols
|
|
433_1
|
|
433_2
|
|
433_3
|
|
433_4
|
|
433_5
|
|
433_6
|
|
*/
|
|
#define RFpulselengthKey "PLSL_" // pulselength will be defined if a subject contains RFprotocolKey followed by a value of 3 digits
|
|
// subject monitored to listen traffic processed by other gateways to store data and avoid ntuple
|
|
#define subjectMultiGTWRF "+/+/433toMQTT"
|
|
//RF number of signal repetition - Can be overridden by specifying "repeat" in a JSON message.
|
|
#define RF_EMITTER_REPEAT 20
|
|
|
|
/*-------------------RF2 topics & parameters----------------------*/
|
|
//433Mhz newremoteswitch MQTT Subjects and keys
|
|
#define subjectMQTTtoRF2 Base_Topic Gateway_Name "/commands/MQTTtoRF2"
|
|
#define subjectRF2toMQTT Base_Topic Gateway_Name "/RF2toMQTT"
|
|
#define subjectGTWRF2toMQTT Base_Topic Gateway_Name "/433toMQTT"
|
|
#define RF2codeKey "ADDRESS_" // code will be defined if a subject contains RF2codeKey followed by a value of 7 digits
|
|
#define RF2periodKey "PERIOD_" // period will be defined if a subject contains RF2periodKey followed by a value of 3 digits
|
|
#define RF2unitKey "UNIT_" // number of your unit value will be defined if a subject contains RF2unitKey followed by a value of 1-2 digits
|
|
#define RF2groupKey "GROUP_" // number of your group value will be defined if a subject contains RF2groupKey followed by a value of 1 digit
|
|
#define RF2dimKey "DIM" // number of your dim value will be defined if a subject contains RF2dimKey and the payload contains the dim value as digits
|
|
|
|
/*-------------------ESPPiLight topics & parameters----------------------*/
|
|
//433Mhz Pilight MQTT Subjects and keys
|
|
#define subjectMQTTtoPilight Base_Topic Gateway_Name "/commands/MQTTtoPilight"
|
|
#define subjectPilighttoMQTT Base_Topic Gateway_Name "/PilighttoMQTT"
|
|
#define subjectGTWPilighttoMQTT Base_Topic Gateway_Name "/PilighttoMQTT"
|
|
#define PilightRAW "RAW"
|
|
#define repeatPilightwMQTT false // do we repeat a received signal by using mqtt with Pilight gateway
|
|
|
|
/*-------------------PIN DEFINITIONS----------------------*/
|
|
#ifndef RF_RECEIVER_PIN
|
|
#ifdef ESP8266
|
|
#define RF_RECEIVER_PIN 0 // D3 on nodemcu // put 4 with rf bridge direct mod
|
|
#elif ESP32
|
|
#define RF_RECEIVER_PIN 27 // D27 on DOIT ESP32
|
|
#elif __AVR_ATmega2560__
|
|
#define RF_RECEIVER_PIN 1 //1 = D3 on mega
|
|
#else
|
|
#define RF_RECEIVER_PIN 1 //1 = D3 on arduino
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef RF_EMITTER_PIN
|
|
#ifdef ESP8266
|
|
#define RF_EMITTER_PIN 3 // RX on nodemcu if it doesn't work with 3, try with 4 (D2) // put 5 with rf bridge direct mod
|
|
#elif ESP32
|
|
#define RF_EMITTER_PIN 12 // D12 on DOIT ESP32
|
|
#elif __AVR_ATmega2560__
|
|
#define RF_EMITTER_PIN 4
|
|
#else
|
|
//IMPORTANT NOTE: On arduino UNO connect IR emitter pin to D9 , comment #define IR_USE_TIMER2 and uncomment #define IR_USE_TIMER1 on library <library>IRremote/boarddefs.h so as to free pin D3 for RF RECEIVER PIN
|
|
//RF PIN definition
|
|
#define RF_EMITTER_PIN 4 //4 = D4 on arduino
|
|
#endif
|
|
#endif
|
|
|
|
#endif |