chriz/OpenMQTT-Gateway
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 5 Wiki Activity
Files
4706d75adc4bf09e3a7616c90911e8ff2ffb8dfd
OpenMQTT-Gateway/main/main.ino
T

1652 lines
48 KiB
Arduino
Raw Blame History

/*
OpenMQTTGateway - ESP8266 or Arduino program for home automation
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
Send and receiving command by MQTT
This program enables to:
- receive MQTT data from a topic and send signal (RF, IR, BLE, GSM) corresponding to the received MQTT data
- publish MQTT data to a different topic related to received signals (RF, IR, BLE, GSM)
Copyright: (c)Florian ROBERT
This file is part of OpenMQTTGateway.
OpenMQTTGateway is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
OpenMQTTGateway is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "User_config.h"
// Macros and structure to enable the duplicates removing on the following gateways
#if defined(ZgatewayRF) || defined(ZgatewayIR) || defined(ZgatewaySRFB) || defined(ZgatewayWeatherStation)
// array to store previous received RFs, IRs codes and their timestamps
struct ReceivedSignal {
SIGNAL_SIZE_UL_ULL value;
uint32_t time;
};
# if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
# define struct_size 12
ReceivedSignal receivedSignal[struct_size] = {{0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}};
# else // boards with smaller memory
# define struct_size 4
ReceivedSignal receivedSignal[struct_size] = {{0, 0}, {0, 0}, {0, 0}, {0, 0}};
# endif
#endif
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
//Time used to wait for an interval before checking system measures
unsigned long timer_sys_measures = 0;
# define ARDUINOJSON_USE_LONG_LONG 1
#endif
#include <ArduinoJson.h>
#include <ArduinoLog.h>
#include <PubSubClient.h>
StaticJsonBuffer<JSON_MSG_BUFFER> modulesBuffer;
JsonArray& modules = modulesBuffer.createArray();
#ifndef ZgatewayGFSunInverter
// Arduino IDE compiles, it automatically creates all the header declarations for all the functions you have in your *.ino file.
// Unfortunately it ignores #if directives.
// This is a simple workaround for this problem.
struct GfSun2000Data {};
#endif
// Modules config inclusion
#if defined(ZgatewayRF) || defined(ZgatewayRF2) || defined(ZgatewayPilight) || defined(ZactuatorSomfy) || defined(ZgatewayRTL_433)
# include "config_RF.h"
#endif
#ifdef ZgatewayWeatherStation
# include "config_WeatherStation.h"
#endif
#ifdef ZgatewayGFSunInverter
# include "config_GFSunInverter.h"
#endif
#ifdef ZgatewayLORA
# include "config_LORA.h"
#endif
#ifdef ZgatewaySRFB
# include "config_SRFB.h"
#endif
#ifdef ZgatewayBT
# include "config_BT.h"
#endif
#ifdef ZgatewayIR
# include "config_IR.h"
#endif
#ifdef Zgateway2G
# include "config_2G.h"
#endif
#ifdef ZactuatorONOFF
# include "config_ONOFF.h"
#endif
#ifdef ZsensorINA226
# include "config_INA226.h"
#endif
#ifdef ZsensorHCSR501
# include "config_HCSR501.h"
#endif
#ifdef ZsensorADC
# include "config_ADC.h"
#endif
#ifdef ZsensorBH1750
# include "config_BH1750.h"
#endif
#ifdef ZsensorTSL2561
# include "config_TSL2561.h"
#endif
#ifdef ZsensorBME280
# include "config_BME280.h"
#endif
#ifdef ZsensorHTU21
# include "config_HTU21.h"
#endif
#ifdef ZsensorAHTx0
# include "config_AHTx0.h"
#endif
#ifdef ZsensorHCSR04
# include "config_HCSR04.h"
#endif
#ifdef ZsensorDHT
# include "config_DHT.h"
#endif
#ifdef ZsensorSHTC3
# include "config_SHTC3.h"
#endif
#ifdef ZsensorDS1820
# include "config_DS1820.h"
#endif
#ifdef ZgatewayRFM69
# include "config_RFM69.h"
#endif
#ifdef ZsensorGPIOInput
# include "config_GPIOInput.h"
#endif
#ifdef ZsensorGPIOKeyCode
# include "config_GPIOKeyCode.h"
#endif
#ifdef ZmqttDiscovery
# include "config_mqttDiscovery.h"
#endif
#ifdef ZactuatorFASTLED
# include "config_FASTLED.h"
#endif
#ifdef ZactuatorPWM
# include "config_PWM.h"
#endif
#ifdef ZactuatorSomfy
# include "config_Somfy.h"
#endif
#if defined(ZboardM5STICKC) || defined(ZboardM5STICKCP) || defined(ZboardM5STACK)
# include "config_M5.h"
#endif
#if defined(ZgatewayRS232)
# include "config_RS232.h"
#endif
/*------------------------------------------------------------------------*/
//adding this to bypass the problem of the arduino builder issue 50
void callback(char* topic, byte* payload, unsigned int length);
char mqtt_user[parameters_size] = MQTT_USER; // not compulsory only if your broker needs authentication
char mqtt_pass[parameters_size * 2] = MQTT_PASS; // not compulsory only if your broker needs authentication
char mqtt_server[parameters_size] = MQTT_SERVER;
char mqtt_port[6] = MQTT_PORT;
char mqtt_topic[mqtt_topic_max_size] = Base_Topic;
char gateway_name[parameters_size * 2] = Gateway_Name;
bool connectedOnce = false; //indicate if we have been connected once to MQTT
int failure_number_ntwk = 0; // number of failure connecting to network
int failure_number_mqtt = 0; // number of failure connecting to MQTT
#ifdef ZmqttDiscovery
bool disc = true; // Auto discovery with Home Assistant convention
#endif
unsigned long timer_led_measures = 0;
#ifdef ESP32
# include <ArduinoOTA.h>
# include <FS.h>
# include <SPIFFS.h>
# ifdef ESP32_ETHERNET
# define ETH_CLK_MODE ETH_CLOCK_GPIO17_OUT
# define ETH_PHY_POWER 12
# include <ETH.h>
void WiFiEvent(WiFiEvent_t event);
static bool esp32EthConnected = false;
# endif
# ifdef SECURE_CONNECTION
# include <WiFiClientSecure.h>
WiFiClientSecure eClient;
# else
# include <WiFi.h>
# include <WiFiMulti.h>
WiFiMulti wifiMulti;
WiFiClient eClient;
# endif
# include <Preferences.h>
# include <WiFiManager.h>
Preferences preferences;
# ifdef MDNS_SD
# include <ESPmDNS.h>
# endif
#elif defined(ESP8266)
# include <ArduinoOTA.h>
# include <DNSServer.h>
# include <ESP8266WebServer.h>
# include <ESP8266WiFi.h>
# include <ESP8266WiFiMulti.h>
# include <FS.h>
# include <WiFiManager.h>
# ifdef SECURE_CONNECTION
WiFiClientSecure eClient;
X509List caCert(certificate);
# else
WiFiClient eClient;
ESP8266WiFiMulti wifiMulti;
# endif
# ifdef MDNS_SD
# include <ESP8266mDNS.h>
# endif
#else
# include <Ethernet.h>
EthernetClient eClient;
#endif
#define convertTemp_CtoF(c) ((c * 1.8) + 32)
#define convertTemp_FtoC(f) ((f - 32) * 5 / 9)
// client link to pubsub mqtt
PubSubClient client(eClient);
void revert_hex_data(const char* in, char* out, int l) {
//reverting array 2 by 2 to get the data in good order
int i = l - 2, j = 0;
while (i != -2) {
if (i % 2 == 0)
out[j] = in[i + 1];
else
out[j] = in[i - 1];
j++;
i--;
}
out[l - 1] = '\0';
}
/**
* Retrieve an unsigned long value from a char array extract representing hexadecimal data, reversed or not,
* This value can represent a negative value if canBeNegative is set to true
*/
long value_from_hex_data(const char* service_data, int offset, int data_length, bool reverse, bool canBeNegative = true) {
char data[data_length + 1];
memcpy(data, &service_data[offset], data_length);
data[data_length] = '\0';
long value;
if (reverse) {
// reverse data order
char rev_data[data_length + 1];
revert_hex_data(data, rev_data, data_length + 1);
value = strtol(rev_data, NULL, 16);
} else {
value = strtol(data, NULL, 16);
}
if (value > 65000 && data_length <= 4 && canBeNegative)
value = value - 65535;
Log.trace(F("value %D" CR), value);
return value;
}
char* ip2CharArray(IPAddress ip) { //from Nick Lee https://stackoverflow.com/questions/28119653/arduino-display-ethernet-localip
static char a[16];
sprintf(a, "%d.%d.%d.%d", ip[0], ip[1], ip[2], ip[3]);
return a;
}
bool to_bool(String const& s) { // thanks Chris Jester-Young from stackoverflow
return s != "0";
}
void pub(const char* topicori, const char* payload, bool retainFlag) {
String topic = String(mqtt_topic) + String(topicori);
pubMQTT(topic.c_str(), payload, retainFlag);
}
void pub(const char* topicori, JsonObject& data) {
Log.notice(F("Subject: %s" CR), topicori);
digitalWrite(LED_RECEIVE, LED_RECEIVE_ON);
logJson(data);
if (client.connected()) {
String topic = String(mqtt_topic) + String(topicori);
#ifdef valueAsASubject
# ifdef ZgatewayPilight
String value = data["value"];
String protocol = data["protocol"];
if (value != 0) {
topic = topic + "/" + protocol + "/" + value;
}
# else
SIGNAL_SIZE_UL_ULL value = data["value"];
if (value != 0) {
topic = topic + "/" + String(value);
}
# endif
#endif
#ifdef jsonPublishing
Log.trace(F("jsonPublishing" CR));
# if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
char JSONmessageBuffer[data.measureLength() + 1];
# else
char JSONmessageBuffer[JSON_MSG_BUFFER];
# endif
data.printTo(JSONmessageBuffer, sizeof(JSONmessageBuffer));
pubMQTT(topic, JSONmessageBuffer);
#endif
#ifdef simplePublishing
Log.trace(F("simplePublishing" CR));
// Loop through all the key-value pairs in obj
for (JsonPair& p : data) {
# if defined(ESP8266)
yield();
# endif
if (p.value.is<SIGNAL_SIZE_UL_ULL>() && strcmp(p.key, "rssi") != 0) { //test rssi , bypass solution due to the fact that a int is considered as an SIGNAL_SIZE_UL_ULL
if (strcmp(p.key, "value") == 0) { // if data is a value we don't integrate the name into the topic
pubMQTT(topic, p.value.as<SIGNAL_SIZE_UL_ULL>());
} else { // if data is not a value we integrate the name into the topic
pubMQTT(topic + "/" + String(p.key), p.value.as<SIGNAL_SIZE_UL_ULL>());
}
} else if (p.value.is<int>()) {
pubMQTT(topic + "/" + String(p.key), p.value.as<int>());
} else if (p.value.is<float>()) {
pubMQTT(topic + "/" + String(p.key), p.value.as<float>());
} else if (p.value.is<char*>()) {
pubMQTT(topic + "/" + String(p.key), p.value.as<const char*>());
}
}
#endif
} else {
Log.warning(F("client not connected can't pub" CR));
}
}
void pub(const char* topicori, const char* payload) {
if (client.connected()) {
String topic = String(mqtt_topic) + String(topicori);
Log.trace(F("Pub ack %s into: %s" CR), payload, topic.c_str());
pubMQTT(topic, payload);
} else {
Log.warning(F("client not connected can't pub" CR));
}
}
void pub_custom_topic(const char* topicori, JsonObject& data, boolean retain) {
if (client.connected()) {
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
char JSONmessageBuffer[data.measureLength() + 1];
#else
char JSONmessageBuffer[JSON_MSG_BUFFER];
#endif
data.printTo(JSONmessageBuffer, sizeof(JSONmessageBuffer));
Log.trace(F("Pub json :%s into custom topic: %s" CR), JSONmessageBuffer, topicori);
pubMQTT(topicori, JSONmessageBuffer, retain);
} else {
Log.warning(F("client not connected can't pub" CR));
}
}
// Low level MQTT functions
void pubMQTT(const char* topic, const char* payload) {
client.publish(topic, payload);
}
void pubMQTT(const char* topicori, const char* payload, bool retainFlag) {
client.publish(topicori, payload, retainFlag);
}
void pubMQTT(String topic, const char* payload) {
client.publish(topic.c_str(), payload);
}
void pubMQTT(const char* topic, unsigned long payload) {
char val[11];
sprintf(val, "%lu", payload);
client.publish(topic, val);
}
void pubMQTT(const char* topic, unsigned long long payload) {
char val[21];
sprintf(val, "%llu", payload);
client.publish(topic, val);
}
void pubMQTT(const char* topic, String payload) {
client.publish(topic, payload.c_str());
}
void pubMQTT(String topic, String payload) {
client.publish(topic.c_str(), payload.c_str());
}
void pubMQTT(String topic, int payload) {
char val[12];
sprintf(val, "%d", payload);
client.publish(topic.c_str(), val);
}
void pubMQTT(String topic, unsigned long long payload) {
char val[21];
sprintf(val, "%llu", payload);
client.publish(topic.c_str(), val);
}
void pubMQTT(String topic, float payload) {
char val[12];
dtostrf(payload, 3, 1, val);
client.publish(topic.c_str(), val);
}
void pubMQTT(const char* topic, float payload) {
char val[12];
dtostrf(payload, 3, 1, val);
client.publish(topic, val);
}
void pubMQTT(const char* topic, int payload) {
char val[6];
sprintf(val, "%d", payload);
client.publish(topic, val);
}
void pubMQTT(const char* topic, unsigned int payload) {
char val[6];
sprintf(val, "%u", payload);
client.publish(topic, val);
}
void pubMQTT(const char* topic, long payload) {
char val[11];
sprintf(val, "%ld", payload);
client.publish(topic, val);
}
void pubMQTT(const char* topic, double payload) {
char val[16];
sprintf(val, "%f", payload);
client.publish(topic, val);
}
void pubMQTT(String topic, unsigned long payload) {
char val[11];
sprintf(val, "%lu", payload);
client.publish(topic.c_str(), val);
}
void logJson(JsonObject& jsondata) {
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
char JSONmessageBuffer[jsondata.measureLength() + 1];
#else
char JSONmessageBuffer[JSON_MSG_BUFFER];
#endif
jsondata.printTo(JSONmessageBuffer, sizeof(JSONmessageBuffer));
Log.notice(F("Received json : %s" CR), JSONmessageBuffer);
}
bool cmpToMainTopic(const char* topicOri, const char* toAdd) {
char topic[mqtt_topic_max_size];
strcpy(topic, mqtt_topic);
strcat(topic, toAdd);
if (strstr(topicOri, topic) != NULL) {
return true;
} else {
return false;
}
}
void connectMQTT() {
#ifndef ESPWifiManualSetup
# if defined(ESP8266) || defined(ESP32)
checkButton(); // check if a reset of wifi/mqtt settings is asked
# endif
#endif
Log.warning(F("MQTT connection..." CR));
char topic[mqtt_topic_max_size];
strcpy(topic, mqtt_topic);
strcat(topic, will_Topic);
client.setBufferSize(mqtt_max_packet_size);
if (client.connect(gateway_name, mqtt_user, mqtt_pass, topic, will_QoS, will_Retain, will_Message)) {
#if defined(ZboardM5STICKC) || defined(ZboardM5STICKCP) || defined(ZboardM5STACK)
if (lowpowermode < 2)
M5Display("MQTT connected", "", "");
#endif
Log.notice(F("Connected to broker" CR));
failure_number_mqtt = 0;
// Once connected, publish an announcement...
pub(will_Topic, Gateway_AnnouncementMsg, will_Retain);
// publish version
pub(version_Topic, OMG_VERSION, will_Retain);
//Subscribing to topic
char topic2[mqtt_topic_max_size];
strcpy(topic2, mqtt_topic);
strcat(topic2, subjectMQTTtoX);
if (client.subscribe(topic2)) {
#ifdef ZgatewayRF
client.subscribe(subjectMultiGTWRF); // subject on which other OMG will publish, this OMG will store these msg and by the way don't republish them if they have been already published
#endif
#ifdef ZgatewayIR
client.subscribe(subjectMultiGTWIR); // subject on which other OMG will publish, this OMG will store these msg and by the way don't republish them if they have been already published
#endif
Log.trace(F("Subscription OK to the subjects %s" CR), topic2);
}
} else {
failure_number_mqtt++; // we count the failure
Log.warning(F("failure_number_mqtt: %d" CR), failure_number_mqtt);
Log.warning(F("failed, rc=%d" CR), client.state());
#if defined(SECURE_CONNECTION) && defined(ESP32)
Log.warning(F("failed, ssl error code=%d" CR), eClient.lastError(nullptr, 0));
#elif defined(SECURE_CONNECTION) && defined(ESP8266)
Log.warning(F("failed, ssl error code=%d" CR), eClient.getLastSSLError());
#endif
digitalWrite(LED_INFO, LED_INFO_ON);
delay(1000);
digitalWrite(LED_INFO, !LED_INFO_ON);
delay(4000);
}
}
// Callback function, when the gateway receive an MQTT value on the topics subscribed this function is called
void callback(char* topic, byte* payload, unsigned int length) {
// In order to republish this payload, a copy must be made
// as the orignal payload buffer will be overwritten whilst
// constructing the PUBLISH packet.
Log.trace(F("Hey I got a callback %s" CR), topic);
// Allocate the correct amount of memory for the payload copy
byte* p = (byte*)malloc(length + 1);
// Copy the payload to the new buffer
memcpy(p, payload, length);
// Conversion to a printable string
p[length] = '\0';
//launch the function to treat received data if this data concern OpenMQTTGateway
if ((strstr(topic, subjectMultiGTWKey) != NULL) || (strstr(topic, subjectGTWSendKey) != NULL))
receivingMQTT(topic, (char*)p);
// Free the memory
free(p);
}
void setup_parameters() {
strcat(mqtt_topic, gateway_name);
}
void setup() {
//Launch serial for debugging purposes
Serial.begin(SERIAL_BAUD);
Log.begin(LOG_LEVEL, &Serial);
Log.notice(F(CR "************* WELCOME TO OpenMQTTGateway **************" CR));
#if defined(ESP8266) || defined(ESP32)
# ifdef ESP8266
# ifndef ZgatewaySRFB // if we are not in sonoff rf bridge case we apply the ESP8266 GPIO optimization
Serial.end();
Serial.begin(SERIAL_BAUD, SERIAL_8N1, SERIAL_TX_ONLY); // enable on ESP8266 to free some pin
# endif
# elif ESP32
preferences.begin(Gateway_Short_Name, false);
lowpowermode = preferences.getUInt("lowpowermode", DEFAULT_LOW_POWER_MODE);
preferences.end();
# if defined(ZboardM5STICKC) || defined(ZboardM5STICKCP) || defined(ZboardM5STACK)
setupM5();
# endif
Log.notice(F("OpenMQTTGateway Version: " OMG_VERSION CR));
# endif
# ifdef ESP32_ETHERNET
setup_ethernet_esp32();
# else // WIFI ESP
# if defined(ESPWifiManualSetup)
setup_wifi();
# else
setup_wifimanager(false);
# endif
Log.trace(F("OpenMQTTGateway mac: %s" CR), WiFi.macAddress().c_str());
Log.trace(F("OpenMQTTGateway ip: %s" CR), WiFi.localIP().toString().c_str());
# endif
setOTA();
# ifdef SECURE_CONNECTION
setupTLS();
# endif
#else // In case of arduino platform
//Launch serial for debugging purposes
Serial.begin(SERIAL_BAUD);
//Begining ethernet connection in case of Arduino + W5100
setup_ethernet();
#endif
//setup LED status
pinMode(LED_RECEIVE, OUTPUT);
pinMode(LED_SEND, OUTPUT);
pinMode(LED_INFO, OUTPUT);
digitalWrite(LED_RECEIVE, !LED_RECEIVE_ON);
digitalWrite(LED_SEND, !LED_SEND_ON);
digitalWrite(LED_INFO, !LED_INFO_ON);
#if defined(MDNS_SD) && (defined(ESP8266) || defined(ESP32))
Log.trace(F("Connecting to MQTT by mDNS without mqtt hostname" CR));
connectMQTTmdns();
#else
long port;
port = strtol(mqtt_port, NULL, 10);
Log.trace(F("Port: %l" CR), port);
Log.trace(F("Mqtt server: %s" CR), mqtt_server);
client.setServer(mqtt_server, port);
#endif
setup_parameters();
client.setCallback(callback);
delay(1500);
#ifdef ZsensorBME280
setupZsensorBME280();
modules.add(ZsensorBME280);
#endif
#ifdef ZsensorHTU21
setupZsensorHTU21();
modules.add(ZsensorHTU21);
#endif
#ifdef ZsensorAHTx0
setupZsensorAHTx0();
modules.add(ZsensorAHTx0);
#endif
#ifdef ZsensorBH1750
setupZsensorBH1750();
modules.add(ZsensorBH1750);
#endif
#ifdef ZsensorTSL2561
setupZsensorTSL2561();
modules.add(ZsensorTSL2561);
#endif
#ifdef Zgateway2G
setup2G();
modules.add(Zgateway2G);
#endif
#ifdef ZgatewayIR
setupIR();
modules.add(ZgatewayIR);
#endif
#ifdef ZgatewayLORA
setupLORA();
modules.add(ZgatewayLORA);
#endif
#ifdef ZgatewayRF
setupRF();
modules.add(ZgatewayRF);
# define ACTIVE_RECEIVER ACTIVE_RF
#endif
#ifdef ZgatewayRF2
setupRF2();
modules.add(ZgatewayRF2);
# ifdef ACTIVE_RECEIVER
# undef ACTIVE_RECEIVER
# endif
# define ACTIVE_RECEIVER ACTIVE_RF2
#endif
#ifdef ZgatewayPilight
setupPilight();
modules.add(ZgatewayPilight);
disablePilightReceive();
# ifdef ACTIVE_RECEIVER
# undef ACTIVE_RECEIVER
# endif
# define ACTIVE_RECEIVER ACTIVE_PILIGHT
#endif
#ifdef ZgatewayWeatherStation
setupWeatherStation();
modules.add(ZgatewayWeatherStation);
#endif
#ifdef ZgatewayGFSunInverter
setupGFSunInverter();
modules.add(ZgatewayGFSunInverter);
#endif
#ifdef ZgatewaySRFB
setupSRFB();
modules.add(ZgatewaySRFB);
#endif
#ifdef ZgatewayBT
setupBT();
modules.add(ZgatewayBT);
#endif
#ifdef ZgatewayRFM69
setupRFM69();
modules.add(ZgatewayRFM69);
#endif
#ifdef ZsensorINA226
setupINA226();
modules.add(ZsensorINA226);
#endif
#ifdef ZsensorHCSR501
setupHCSR501();
modules.add(ZsensorHCSR501);
#endif
#ifdef ZsensorHCSR04
setupHCSR04();
modules.add(ZsensorHCSR04);
#endif
#ifdef ZsensorGPIOInput
setupGPIOInput();
modules.add(ZsensorGPIOInput);
#endif
#ifdef ZsensorGPIOKeyCode
setupGPIOKeyCode();
modules.add(ZsensorGPIOKeyCode);
#endif
#ifdef ZactuatorFASTLED
setupFASTLED();
modules.add(ZactuatorFASTLED);
#endif
#ifdef ZactuatorPWM
setupPWM();
modules.add(ZactuatorPWM);
#endif
#ifdef ZactuatorSomfy
setupSomfy();
modules.add(ZactuatorSomfy);
#endif
#ifdef ZsensorDS1820
setupZsensorDS1820();
modules.add(ZsensorDS1820);
#endif
#ifdef ZsensorADC
setupADC();
modules.add(ZsensorADC);
#endif
#ifdef ZsensorDHT
setupDHT();
modules.add(ZsensorDHT);
#endif
#ifdef ZgatewayRS232
setupRS232();
modules.add(ZgatewayRS232);
#endif
#ifdef ZsensorSHTC3
setupSHTC3();
#endif
#ifdef ZgatewayRTL_433
setupRTL_433();
modules.add(ZgatewayRTL_433);
# ifdef ACTIVE_RECEIVER
# undef ACTIVE_RECEIVER
# endif
# define ACTIVE_RECEIVER ACTIVE_RTL
#endif
#if defined(ZgatewayRTL_433) || defined(ZgatewayRF) || defined(ZgatewayPilight) || defined(ZgatewayRF2)
# ifdef DEFAULT_RECEIVER // Allow defining of default receiver as a compiler directive
activeReceiver = DEFAULT_RECEIVER;
# else
activeReceiver = ACTIVE_RECEIVER;
# endif
enableActiveReceiver();
#endif
Log.trace(F("mqtt_max_packet_size: %d" CR), mqtt_max_packet_size);
#ifndef ARDUINO_AVR_UNO // Space issues with the UNO
char jsonChar[100];
modules.printTo((char*)jsonChar, modules.measureLength() + 1);
Log.notice(F("OpenMQTTGateway modules: %s" CR), jsonChar);
#endif
Log.notice(F("************** Setup OpenMQTTGateway end **************" CR));
}
#if defined(ESP8266) || defined(ESP32)
// Bypass for ESP not reconnecting automaticaly the second time https://github.com/espressif/arduino-esp32/issues/2501
bool wifi_reconnect_bypass() {
uint8_t wifi_autoreconnect_cnt = 0;
# ifdef ESP32
while (WiFi.status() != WL_CONNECTED && wifi_autoreconnect_cnt < maxConnectionRetryWifi) {
# else
while (WiFi.waitForConnectResult() != WL_CONNECTED && wifi_autoreconnect_cnt < maxConnectionRetryWifi) {
# endif
Log.notice(F("Attempting Wifi connection with saved AP: %d" CR), wifi_autoreconnect_cnt);
WiFi.begin();
delay(500);
wifi_autoreconnect_cnt++;
}
if (wifi_autoreconnect_cnt < maxConnectionRetryWifi) {
return true;
} else {
return false;
}
}
void setOTA() {
// Port defaults to 8266
ArduinoOTA.setPort(ota_port);
// Hostname defaults to esp8266-[ChipID]
ArduinoOTA.setHostname(ota_hostname);
// No authentication by default
ArduinoOTA.setPassword(ota_password);
ArduinoOTA.onStart([]() {
Log.trace(F("Start OTA, lock other functions" CR));
# if defined(ZgatewayBT) && defined(ESP32)
stopProcessing();
# endif
# if defined(ZboardM5STICKC) || defined(ZboardM5STICKCP) || defined(ZboardM5STACK)
M5Display("OTA in progress", "", "");
# endif
});
ArduinoOTA.onEnd([]() {
Log.trace(F("\nOTA done" CR));
# if defined(ZgatewayBT) && defined(ESP32)
startProcessing();
# endif
# if defined(ZboardM5STICKC) || defined(ZboardM5STICKCP) || defined(ZboardM5STACK)
M5Display("OTA done", "", "");
# endif
});
ArduinoOTA.onProgress([](unsigned int progress, unsigned int total) {
Log.trace(F("Progress: %u%%\r" CR), (progress / (total / 100)));
});
ArduinoOTA.onError([](ota_error_t error) {
# if defined(ZgatewayBT) && defined(ESP32)
startProcessing();
# endif
Serial.printf("Error[%u]: ", error);
if (error == OTA_AUTH_ERROR)
Log.error(F("Auth Failed" CR));
else if (error == OTA_BEGIN_ERROR)
Log.error(F("Begin Failed" CR));
else if (error == OTA_CONNECT_ERROR)
Log.error(F("Connect Failed" CR));
else if (error == OTA_RECEIVE_ERROR)
Log.error(F("Receive Failed" CR));
else if (error == OTA_END_ERROR)
Log.error(F("End Failed" CR));
});
ArduinoOTA.begin();
}
# ifdef SECURE_CONNECTION
void setupTLS() {
# if defined(NTP_SERVER)
configTime(0, 0, NTP_SERVER);
# endif
# if defined(ESP32)
eClient.setCACert(certificate);
# elif defined(ESP8266)
eClient.setTrustAnchors(&caCert);
eClient.setBufferSizes(512, 512);
# endif
}
# endif
#endif
#if defined(ESPWifiManualSetup)
void setup_wifi() {
WiFi.mode(WIFI_STA);
wifiMulti.addAP(wifi_ssid, wifi_password);
Log.trace(F("Connecting to %s" CR), wifi_ssid);
# ifdef wifi_ssid1
wifiMulti.addAP(wifi_ssid1, wifi_password1);
Log.trace(F("Connecting to %s" CR), wifi_ssid1);
# endif
delay(10);
// We start by connecting to a WiFi network
# ifdef NetworkAdvancedSetup
IPAddress ip_adress(ip);
IPAddress gateway_adress(gateway);
IPAddress subnet_adress(subnet);
IPAddress dns_adress(Dns);
if (!WiFi.config(ip_adress, gateway_adress, subnet_adress, dns_adress)) {
Log.error(F("Wifi STA Failed to configure" CR));
}
# endif
while (wifiMulti.run() != WL_CONNECTED) {
delay(500);
Log.trace(F("." CR));
failure_number_ntwk++;
# if defined(ESP32) && defined(ZgatewayBT)
if (failure_number_ntwk > maxConnectionRetryWifi && lowpowermode)
lowPowerESP32();
# endif
}
Log.notice(F("WiFi ok with manual config credentials" CR));
}
#elif defined(ESP8266) || defined(ESP32)
WiFiManager wifiManager;
//flag for saving data
bool shouldSaveConfig = true;
//do we have been connected once to mqtt
//callback notifying us of the need to save config
void saveConfigCallback() {
Log.trace(F("Should save config" CR));
shouldSaveConfig = true;
}
# ifdef TRIGGER_GPIO
void checkButton() { // code from tzapu/wifimanager examples
// check for button press
if (digitalRead(TRIGGER_GPIO) == LOW) {
// poor mans debounce/press-hold, code not ideal for production
delay(50);
if (digitalRead(TRIGGER_GPIO) == LOW) {
Log.trace(F("Trigger button Pressed" CR));
// still holding button for 3000 ms, reset settings, code not ideaa for production
delay(3000); // reset delay hold
if (digitalRead(TRIGGER_GPIO) == LOW) {
Log.trace(F("Button Held" CR));
Log.notice(F("Erasing ESP Config, restarting" CR));
setup_wifimanager(true);
}
}
}
}
# else
void checkButton() {}
# endif
void eraseAndRestart() {
# if defined(ESP8266)
WiFi.disconnect(true);
# else
WiFi.disconnect(true, true);
# endif
Log.trace(F("Formatting requested, result: %d" CR), SPIFFS.format());
# if defined(ESP8266)
ESP.eraseConfig();
delay(5000);
ESP.reset();
# else
ESP.restart();
# endif
}
void setup_wifimanager(bool reset_settings) {
# ifdef TRIGGER_GPIO
pinMode(TRIGGER_GPIO, INPUT_PULLUP);
# endif
delay(10);
WiFi.mode(WIFI_STA);
if (reset_settings)
eraseAndRestart();
//read configuration from FS json
Log.trace(F("mounting FS..." CR));
if (SPIFFS.begin()) {
Log.trace(F("mounted file system" CR));
} else {
Log.warning(F("failed to mount FS -> formating" CR));
SPIFFS.format();
if (SPIFFS.begin())
Log.trace(F("mounted file system after formating" CR));
}
if (SPIFFS.exists("/config.json")) {
//file exists, reading and loading
Log.trace(F("reading config file" CR));
File configFile = SPIFFS.open("/config.json", "r");
if (configFile) {
Log.trace(F("opened config file" CR));
size_t size = configFile.size();
// Allocate a buffer to store contents of the file.
std::unique_ptr<char[]> buf(new char[size]);
configFile.readBytes(buf.get(), size);
DynamicJsonBuffer jsonBuffer;
JsonObject& json = jsonBuffer.parseObject(buf.get());
json.printTo(Serial);
if (json.success()) {
Log.trace(F("\nparsed json" CR));
if (json.containsKey("mqtt_server"))
strcpy(mqtt_server, json["mqtt_server"]);
if (json.containsKey("mqtt_port"))
strcpy(mqtt_port, json["mqtt_port"]);
if (json.containsKey("mqtt_user"))
strcpy(mqtt_user, json["mqtt_user"]);
if (json.containsKey("mqtt_pass"))
strcpy(mqtt_pass, json["mqtt_pass"]);
if (json.containsKey("mqtt_topic"))
strcpy(mqtt_topic, json["mqtt_topic"]);
if (json.containsKey("gateway_name"))
strcpy(gateway_name, json["gateway_name"]);
} else {
Log.warning(F("failed to load json config" CR));
}
}
}
// The extra parameters to be configured (can be either global or just in the setup)
// After connecting, parameter.getValue() will get you the configured value
// id/name placeholder/prompt default length
WiFiManagerParameter custom_mqtt_server("server", "mqtt server", mqtt_server, parameters_size);
WiFiManagerParameter custom_mqtt_port("port", "mqtt port", mqtt_port, 6);
WiFiManagerParameter custom_mqtt_user("user", "mqtt user", mqtt_user, parameters_size);
WiFiManagerParameter custom_mqtt_pass("pass", "mqtt pass", mqtt_pass, parameters_size * 2);
WiFiManagerParameter custom_mqtt_topic("topic", "mqtt base topic", mqtt_topic, mqtt_topic_max_size);
WiFiManagerParameter custom_gateway_name("name", "gateway name", gateway_name, parameters_size * 2);
//WiFiManager
//Local intialization. Once its business is done, there is no need to keep it around
wifiManager.setConnectTimeout(WifiManager_TimeOut);
//Set timeout before going to portal
wifiManager.setConfigPortalTimeout(WifiManager_ConfigPortalTimeOut);
//set config save notify callback
wifiManager.setSaveConfigCallback(saveConfigCallback);
//set static ip
# ifdef NetworkAdvancedSetup
Log.trace(F("Adv wifi cfg" CR));
IPAddress gateway_adress(gateway);
IPAddress subnet_adress(subnet);
IPAddress ip_adress(ip);
wifiManager.setSTAStaticIPConfig(ip_adress, gateway_adress, subnet_adress);
# endif
//add all your parameters here
wifiManager.addParameter(&custom_mqtt_server);
wifiManager.addParameter(&custom_mqtt_port);
wifiManager.addParameter(&custom_mqtt_user);
wifiManager.addParameter(&custom_mqtt_pass);
wifiManager.addParameter(&custom_gateway_name);
wifiManager.addParameter(&custom_mqtt_topic);
//set minimum quality of signal so it ignores AP's under that quality
wifiManager.setMinimumSignalQuality(MinimumWifiSignalQuality);
if (!wifi_reconnect_bypass()) // if we didn't connect with saved credential we start Wifimanager web portal
{
# ifdef ESP32
if (lowpowermode < 2) {
# if defined(ZboardM5STICKC) || defined(ZboardM5STICKCP) || defined(ZboardM5STACK)
M5Display("Connect your phone to WIFI AP:", WifiManager_ssid, WifiManager_password);
# endif
} else { // in case of low power mode we put the ESP to sleep again if we didn't get connected (typical in case the wifi is down)
# ifdef ZgatewayBT
lowPowerESP32();
# endif
}
# endif
Log.notice(F("Connect your phone to WIFI AP: %s with PWD: %s" CR), WifiManager_ssid, WifiManager_password);
//fetches ssid and pass and tries to connect
//if it does not connect it starts an access point with the specified name
//and goes into a blocking loop awaiting configuration
if (!wifiManager.autoConnect(WifiManager_ssid, WifiManager_password)) {
Log.warning(F("failed to connect and hit timeout" CR));
delay(3000);
//reset and try again
# if defined(ESP8266)
ESP.reset();
# else
ESP.restart();
# endif
delay(5000);
}
}
# if defined(ZboardM5STICKC) || defined(ZboardM5STICKCP) || defined(ZboardM5STACK)
if (lowpowermode < 2)
M5Display("Wifi connected", "", "");
# endif
//read updated parameters
strcpy(mqtt_server, custom_mqtt_server.getValue());
strcpy(mqtt_port, custom_mqtt_port.getValue());
strcpy(mqtt_user, custom_mqtt_user.getValue());
strcpy(mqtt_pass, custom_mqtt_pass.getValue());
strcpy(mqtt_topic, custom_mqtt_topic.getValue());
strcpy(gateway_name, custom_gateway_name.getValue());
//save the custom parameters to FS
if (shouldSaveConfig) {
Log.trace(F("saving config" CR));
DynamicJsonBuffer jsonBuffer;
JsonObject& json = jsonBuffer.createObject();
json["mqtt_server"] = mqtt_server;
json["mqtt_port"] = mqtt_port;
json["mqtt_user"] = mqtt_user;
json["mqtt_pass"] = mqtt_pass;
json["mqtt_topic"] = mqtt_topic;
json["gateway_name"] = gateway_name;
File configFile = SPIFFS.open("/config.json", "w");
if (!configFile) {
Log.error(F("failed to open config file for writing" CR));
}
json.printTo(Serial);
json.printTo(configFile);
configFile.close();
//end save
}
}
# ifdef ESP32_ETHERNET
void setup_ethernet_esp32() {
bool ethBeginSuccess = false;
WiFi.onEvent(WiFiEvent);
# ifdef NetworkAdvancedSetup
Log.trace(F("Adv eth cfg" CR));
ETH.config(ip, gateway, subnet, Dns);
ethBeginSuccess = ETH.begin();
# else
Log.trace(F("Spl eth cfg" CR));
ethBeginSuccess = ETH.begin();
# endif
Log.trace(F("Connecting to Ethernet" CR));
while (!esp32EthConnected) {
delay(500);
Log.trace(F("." CR));
}
}
void WiFiEvent(WiFiEvent_t event) {
switch (event) {
case SYSTEM_EVENT_ETH_START:
Log.trace(F("Ethernet Started" CR));
ETH.setHostname(gateway_name);
break;
case SYSTEM_EVENT_ETH_CONNECTED:
Log.notice(F("Ethernet Connected" CR));
break;
case SYSTEM_EVENT_ETH_GOT_IP:
Log.trace(F("OpenMQTTGateway mac: %s" CR), ETH.macAddress().c_str());
Log.trace(F("OpenMQTTGateway ip: %s" CR), ETH.localIP().toString().c_str());
Log.trace(F("OpenMQTTGateway link speed: %d Mbps" CR), ETH.linkSpeed());
esp32EthConnected = true;
break;
case SYSTEM_EVENT_ETH_DISCONNECTED:
Log.error(F("Ethernet Disconnected" CR));
esp32EthConnected = false;
break;
case SYSTEM_EVENT_ETH_STOP:
Log.error(F("Ethernet Stopped" CR));
esp32EthConnected = false;
break;
default:
break;
}
}
# endif
#else // Arduino case
void setup_ethernet() {
# ifdef NetworkAdvancedSetup
Log.trace(F("Adv eth cfg" CR));
Ethernet.begin(mac, ip, Dns, gateway, subnet);
# else
Log.trace(F("Spl eth cfg" CR));
Ethernet.begin(mac, ip);
# endif
if (Ethernet.hardwareStatus() == EthernetNoHardware) {
Log.error(F("Ethernet shield was not found." CR));
} else {
Log.trace(F("ip: %s " CR), Ethernet.localIP());
}
}
#endif
#if defined(MDNS_SD) && (defined(ESP8266) || defined(ESP32))
void connectMQTTmdns() {
Log.trace(F("Browsing for MQTT service" CR));
int n = MDNS.queryService("mqtt", "tcp");
if (n == 0) {
Log.error(F("no services found" CR));
} else {
Log.trace(F("%d service(s) found" CR), n);
for (int i = 0; i < n; ++i) {
Log.trace(F("Service %d %s found" CR), i, MDNS.hostname(i).c_str());
Log.trace(F("IP %s Port %d" CR), MDNS.IP(i).toString().c_str(), MDNS.port(i));
}
if (n == 1) {
Log.trace(F("One MQTT server found setting parameters" CR));
client.setServer(MDNS.IP(0), int(MDNS.port(0)));
} else {
Log.error(F("Several MQTT servers found, please deactivate mDNS and set your default server" CR));
}
}
}
#endif
void loop() {
#ifndef ESPWifiManualSetup
# if defined(ESP8266) || defined(ESP32)
checkButton(); // check if a reset of wifi/mqtt settings is asked
# endif
#endif
unsigned long now = millis();
// Switch off of the LED after TimeLedON
if (now > (timer_led_measures + (TimeLedON * 1000))) {
timer_led_measures = millis();
digitalWrite(LED_RECEIVE, !LED_RECEIVE_ON);
digitalWrite(LED_INFO, !LED_INFO_ON);
digitalWrite(LED_SEND, !LED_SEND_ON);
}
#if defined(ESP8266) || defined(ESP32)
# ifdef ESP32_ETHERNET
if (esp32EthConnected) {
# else
if (WiFi.status() == WL_CONNECTED) {
# endif
ArduinoOTA.handle();
#else
if ((Ethernet.hardwareStatus() != EthernetW5100 && Ethernet.linkStatus() == LinkON) || (Ethernet.hardwareStatus() == EthernetW5100)) { //we are able to detect disconnection only on w5200 and w5500
#endif
failure_number_ntwk = 0;
if (client.connected()) {
digitalWrite(LED_INFO, LED_INFO_ON);
failure_number_ntwk = 0;
client.loop();
#ifdef ZmqttDiscovery
if (disc) {
if (!connectedOnce) {
pubMqttDiscovery(); // at first connection we publish the discovery payloads
}
}
#endif
connectedOnce = true;
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
if (now > (timer_sys_measures + (TimeBetweenReadingSYS * 1000)) || !timer_sys_measures) {
timer_sys_measures = millis();
stateMeasures();
}
#endif
#ifdef ZsensorBME280
MeasureTempHumAndPressure(); //Addon to measure Temperature, Humidity, Pressure and Altitude with a Bosch BME280
#endif
#ifdef ZsensorHTU21
MeasureTempHum(); //Addon to measure Temperature, Humidity, of a HTU21 sensor
#endif
#ifdef ZsensorAHTx0
MeasureAHTTempHum(); //Addon to measure Temperature, Humidity, of an 'AHTx0' sensor
#endif
#ifdef ZsensorHCSR04
MeasureDistance(); //Addon to measure distance with a HC-SR04
#endif
#ifdef ZsensorBH1750
MeasureLightIntensity(); //Addon to measure Light Intensity with a BH1750
#endif
#ifdef ZsensorTSL2561
MeasureLightIntensityTSL2561();
#endif
#ifdef ZsensorDHT
MeasureTempAndHum(); //Addon to measure the temperature with a DHT
#endif
#ifdef ZsensorSHTC3
MeasureTempAndHum(); //Addon to measure the temperature with a DHT
#endif
#ifdef ZsensorDS1820
MeasureDS1820Temp(); //Addon to measure the temperature with DS1820 sensor(s)
#endif
#ifdef ZsensorINA226
MeasureINA226();
#endif
#ifdef ZsensorHCSR501
MeasureHCSR501();
#endif
#ifdef ZsensorGPIOInput
MeasureGPIOInput();
#endif
#ifdef ZsensorGPIOKeyCode
MeasureGPIOKeyCode();
#endif
#ifdef ZsensorADC
MeasureADC(); //Addon to measure the analog value of analog pin
#endif
#ifdef ZgatewayLORA
LORAtoMQTT();
#endif
#ifdef ZgatewayRF
RFtoMQTT();
#endif
#ifdef ZgatewayRF2
RF2toMQTT();
#endif
#ifdef ZgatewayWeatherStation
ZgatewayWeatherStationtoMQTT();
#endif
#ifdef ZgatewayGFSunInverter
ZgatewayGFSunInverterMQTT();
#endif
#ifdef ZgatewayPilight
PilighttoMQTT();
#endif
#ifdef ZgatewayBT
# ifdef ZmqttDiscovery
if (disc)
launchBTDiscovery();
# endif
# ifndef ESP32
if (BTtoMQTT())
Log.trace(F("BTtoMQTT OK" CR));
# else
emptyBTQueue();
# endif
#endif
#ifdef ZgatewaySRFB
SRFBtoMQTT();
#endif
#ifdef ZgatewayIR
IRtoMQTT();
#endif
#ifdef Zgateway2G
if (_2GtoMQTT())
Log.trace(F("2GtoMQTT OK" CR));
#endif
#ifdef ZgatewayRFM69
if (RFM69toMQTT())
Log.trace(F("RFM69toMQTT OK" CR));
#endif
#ifdef ZgatewayRS232
RS232toMQTT();
#endif
#ifdef ZactuatorFASTLED
FASTLEDLoop();
#endif
#ifdef ZactuatorPWM
PWMLoop();
#endif
#ifdef ZgatewayRTL_433
RTL_433Loop();
#endif
} else {
connectMQTT();
}
} else { // disconnected from network
Log.warning(F("Network disconnected:" CR));
digitalWrite(LED_INFO, LED_INFO_ON);
delay(5000); // add a delay to avoid ESP32 crash and reset
digitalWrite(LED_INFO, !LED_INFO_ON);
delay(5000);
#if defined(ESP8266) || defined(ESP32) && !defined(ESP32_ETHERNET)
# ifdef ESP32 // If used with ESP8266 this method prevent the reconnection
WiFi.reconnect();
# endif
Log.warning(F("wifi" CR));
#else
Log.warning(F("ethernet" CR));
#endif
}
// Function that doesn't need an active connection
#if defined(ZboardM5STICKC) || defined(ZboardM5STICKCP) || defined(ZboardM5STACK)
loopM5();
#endif
}
/**
* Calculate uptime and take into account the millis() rollover
*/
unsigned long uptime() {
static unsigned long lastUptime = 0;
static unsigned long uptimeAdd = 0;
unsigned long uptime = millis() / 1000 + uptimeAdd;
if (uptime < lastUptime) {
uptime += 4294967;
uptimeAdd += 4294967;
}
lastUptime = uptime;
return uptime;
}
#if defined(ESP8266) || defined(ESP32) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
void stateMeasures() {
StaticJsonBuffer<JSON_MSG_BUFFER> jsonBuffer;
JsonObject& SYSdata = jsonBuffer.createObject();
SYSdata["uptime"] = uptime();
SYSdata["version"] = OMG_VERSION;
Log.trace(F("retrieving value of system characteristics Uptime (s):%u" CR), uptime());
# if defined(ESP8266) || defined(ESP32)
uint32_t freeMem;
freeMem = ESP.getFreeHeap();
SYSdata["freemem"] = freeMem;
# ifdef ESP32
SYSdata["freestack"] = uxTaskGetStackHighWaterMark(NULL);
# endif
# ifdef ESP32_ETHERNET
SYSdata["mac"] = (char*)ETH.macAddress().c_str();
SYSdata["ip"] = ip2CharArray(ETH.localIP());
ETH.fullDuplex() ? SYSdata["fd"] = (bool)"true" : SYSdata["fd"] = (bool)"false";
SYSdata["linkspeed"] = (int)ETH.linkSpeed();
# else
long rssi = WiFi.RSSI();
SYSdata["rssi"] = rssi;
String SSID = WiFi.SSID();
SYSdata["SSID"] = SSID;
SYSdata["ip"] = ip2CharArray(WiFi.localIP());
String mac = WiFi.macAddress();
SYSdata["mac"] = (char*)mac.c_str();
# endif
# endif
# ifdef ZgatewayBT
# ifdef ESP32
SYSdata["lowpowermode"] = (int)lowpowermode;
SYSdata["btqblck"] = btQueueBlocked;
SYSdata["btqsum"] = btQueueLengthSum;
SYSdata["btqsnd"] = btQueueLengthCount;
SYSdata["btqavg"] = (btQueueLengthCount > 0 ? btQueueLengthSum / (float)btQueueLengthCount : 0);
# endif
SYSdata["interval"] = BLEinterval;
SYSdata["scanbcnct"] = BLEscanBeforeConnect;
SYSdata["scnct"] = scanCount;
# endif
# ifdef ZboardM5STACK
M5.Power.begin();
SYSdata["m5battlevel"] = (int8_t)M5.Power.getBatteryLevel();
SYSdata["m5ischarging"] = (bool)M5.Power.isCharging();
SYSdata["m5ischargefull"] = (bool)M5.Power.isChargeFull();
# endif
# if defined(ZboardM5STICKC) || defined(ZboardM5STICKCP)
M5.Axp.EnableCoulombcounter();
SYSdata["m5batvoltage"] = (float)M5.Axp.GetBatVoltage();
SYSdata["m5batcurrent"] = (float)M5.Axp.GetBatCurrent();
SYSdata["m5vinvoltage"] = (float)M5.Axp.GetVinVoltage();
SYSdata["m5vincurrent"] = (float)M5.Axp.GetVinCurrent();
SYSdata["m5vbusvoltage"] = (float)M5.Axp.GetVBusVoltage();
SYSdata["m5vbuscurrent"] = (float)M5.Axp.GetVBusCurrent();
SYSdata["m5tempaxp"] = (float)M5.Axp.GetTempInAXP192();
SYSdata["m5batpower"] = (float)M5.Axp.GetBatPower();
SYSdata["m5batchargecurrent"] = (float)M5.Axp.GetBatChargeCurrent();
SYSdata["m5apsvoltage"] = (float)M5.Axp.GetAPSVoltage();
# endif
# if defined(ZgatewayRF) || defined(ZgatewayPilight) || defined(ZgatewayRTL_433) || defined(ZgatewayRF2)
SYSdata["actRec"] = (int)activeReceiver;
# endif
# ifdef ZradioCC1101
SYSdata["mhz"] = (float)receiveMhz;
# endif
# if defined(ZgatewayRTL_433)
if (activeReceiver == ACTIVE_RTL) {
SYSdata["RTLminRssi"] = (int)getRTLMinimumRSSI();
SYSdata["RTLRssi"] = (int)getRTLCurrentRSSI();
SYSdata["RTLCnt"] = (int)getRTLMessageCount();
}
# endif
SYSdata.set("modules", modules);
pub(subjectSYStoMQTT, SYSdata);
}
#endif
#if defined(ZgatewayRF) || defined(ZgatewayIR) || defined(ZgatewaySRFB) || defined(ZgatewayWeatherStation)
/**
* Store signal values from RF, IR, SRFB or Weather stations so as to avoid duplicates
*/
void storeSignalValue(SIGNAL_SIZE_UL_ULL MQTTvalue) {
unsigned long now = millis();
// find oldest value of the buffer
int o = getMin();
Log.trace(F("Min ind: %d" CR), o);
// replace it by the new one
receivedSignal[o].value = MQTTvalue;
receivedSignal[o].time = now;
// Casting "receivedSignal[o].value" to (unsigned long) because ArduinoLog doesn't support uint64_t for ESP's
Log.trace(F("store code : %u / %u" CR), (unsigned long)receivedSignal[o].value, receivedSignal[o].time);
Log.trace(F("Col: val/timestamp" CR));
for (int i = 0; i < struct_size; i++) {
Log.trace(F("mem code : %u / %u" CR), (unsigned long)receivedSignal[i].value, receivedSignal[i].time);
}
}
/**
* get oldest time index from the values array from RF, IR, SRFB or Weather stations so as to avoid duplicates
*/
int getMin() {
unsigned int minimum = receivedSignal[0].time;
int minindex = 0;
for (int i = 1; i < struct_size; i++) {
if (receivedSignal[i].time < minimum) {
minimum = receivedSignal[i].time;
minindex = i;
}
}
return minindex;
}
/**
* Check if signal values from RF, IR, SRFB or Weather stations are duplicates
*/
bool isAduplicateSignal(SIGNAL_SIZE_UL_ULL value) {
Log.trace(F("isAdupl?" CR));
for (int i = 0; i < struct_size; i++) {
if (receivedSignal[i].value == value) {
unsigned long now = millis();
if (now - receivedSignal[i].time < time_avoid_duplicate) { // change
Log.notice(F("no pub. dupl" CR));
return true;
}
}
}
return false;
}
#endif
void receivingMQTT(char* topicOri, char* datacallback) {
StaticJsonBuffer<JSON_MSG_BUFFER> jsonBuffer;
JsonObject& jsondata = jsonBuffer.parseObject(datacallback);
#if defined(ZgatewayRF) || defined(ZgatewayIR) || defined(ZgatewaySRFB) || defined(ZgatewayWeatherStation)
if (strstr(topicOri, subjectMultiGTWKey) != NULL) { // storing received value so as to avoid publishing this value if it has been already sent by this or another OpenMQTTGateway
SIGNAL_SIZE_UL_ULL data = jsondata.success() ? jsondata["value"] : STRTO_UL_ULL(datacallback, NULL, 10);
if (data != 0 && !isAduplicateSignal(data)) {
storeSignalValue(data);
}
}
#endif
if (jsondata.success()) { // json object ok -> json decoding
// log the received json
logJson(jsondata);
#ifdef ZgatewayPilight // ZgatewayPilight is only defined with json publishing due to its numerous parameters
MQTTtoPilight(topicOri, jsondata);
#endif
#ifdef ZgatewayRTL_433 // ZgatewayRTL_433 is only defined with json publishing due to its numerous parameters
MQTTtoRTL_433(topicOri, jsondata);
#endif
#ifdef jsonReceiving
# ifdef ZgatewayLORA
MQTTtoLORA(topicOri, jsondata);
# endif
# ifdef ZgatewayRF
MQTTtoRF(topicOri, jsondata);
# endif
# ifdef ZgatewayRF2
MQTTtoRF2(topicOri, jsondata);
# endif
# ifdef Zgateway2G
MQTTto2G(topicOri, jsondata);
# endif
# ifdef ZgatewaySRFB
MQTTtoSRFB(topicOri, jsondata);
# endif
# ifdef ZgatewayIR
MQTTtoIR(topicOri, jsondata);
# endif
# ifdef ZgatewayRFM69
MQTTtoRFM69(topicOri, jsondata);
# endif
# ifdef ZgatewayBT
MQTTtoBT(topicOri, jsondata);
# endif
# ifdef ZactuatorFASTLED
MQTTtoFASTLED(topicOri, jsondata);
# endif
# ifdef ZactuatorPWM
MQTTtoPWM(topicOri, jsondata);
# endif
# if defined(ZboardM5STICKC) || defined(ZboardM5STICKCP) || defined(ZboardM5STACK)
MQTTtoM5(topicOri, jsondata);
# endif
# ifdef ZactuatorONOFF
MQTTtoONOFF(topicOri, jsondata);
# endif
# ifdef ZactuatorSomfy
MQTTtoSomfy(topicOri, jsondata);
# endif
# ifdef ZgatewayRS232
MQTTtoRS232(topicOri, jsondata);
# endif
#endif
digitalWrite(LED_SEND, LED_SEND_ON);
MQTTtoSYS(topicOri, jsondata);
} else { // not a json object --> simple decoding
#ifdef simpleReceiving
# ifdef ZgatewayLORA
MQTTtoLORA(topicOri, datacallback);
# endif
# ifdef ZgatewayRF
MQTTtoRF(topicOri, datacallback);
# endif
# ifdef ZgatewayRF315
MQTTtoRF315(topicOri, datacallback);
# endif
# ifdef ZgatewayRF2
MQTTtoRF2(topicOri, datacallback);
# endif
# ifdef Zgateway2G
MQTTto2G(topicOri, datacallback);
# endif
# ifdef ZgatewaySRFB
MQTTtoSRFB(topicOri, datacallback);
# endif
# ifdef ZgatewayRFM69
MQTTtoRFM69(topicOri, datacallback);
# endif
# ifdef ZactuatorFASTLED
MQTTtoFASTLED(topicOri, datacallback);
# endif
#endif
#ifdef ZactuatorONOFF
MQTTtoONOFF(topicOri, datacallback);
#endif
}
}
void MQTTtoSYS(char* topicOri, JsonObject& SYSdata) { // json object decoding
if (cmpToMainTopic(topicOri, subjectMQTTtoSYSset)) {
Log.trace(F("MQTTtoSYS json" CR));
#if defined(ESP8266) || defined(ESP32)
if (SYSdata.containsKey("cmd")) {
const char* cmd = SYSdata["cmd"];
Log.notice(F("Command: %s" CR), cmd);
if (strstr(cmd, restartCmd) != NULL) { //restart
# if defined(ESP8266)
ESP.reset();
# else
ESP.restart();
# endif
} else if (strstr(cmd, eraseCmd) != NULL) { //erase and restart
# ifndef ESPWifiManualSetup
setup_wifimanager(true);
# endif
} else if (strstr(cmd, statusCmd) != NULL) { //erase and restart
stateMeasures();
}
}
#endif
#ifdef ZmqttDiscovery
if (SYSdata.containsKey("discovery")) {
if (SYSdata.is<bool>("discovery")) {
disc = SYSdata["discovery"];
if (disc)
pubMqttDiscovery();
} else {
Log.error(F("Discovery command not a boolean" CR));
}
Log.notice(F("Discovery state: %T" CR), disc);
}
#endif
}
}
Reference in new issue View Git Blame Copy Permalink