f5b33104ef
Getting started: - New 15-minute Getting Started guide featuring the two most popular tracks (BLE on esp32dev-ble, RF on lilygo-rtl_433), with broker setup and a verification step - Sidebar restructured around the new-user journey; upload options numbered by ease; Gitpod upload method removed Home page: - VitePress hero with clear actions, larger hero image - How-it-works pipeline diagram shared as a component (responsive via container queries), use-case grid, bigger video tiles without the image lightbox, refreshed press coverage list, functions pills - Support section pointing to Theengs Bridge and github.com/sponsors/1technophile Upload flow: - Decision-oriented upload landing page (journey strip, method cards, comparison table) - Pre-flight checklist and driver troubleshooting on the web installer - Guided environment picker (bridge + hardware wizard) replacing the filter chips, with manifest-verified recommendations - Post-flash next-steps card linking to the portal and verification Board images: - custom_img key in environments.ini and board photos for all web-flashable environments (licenses recorded); private prod_env.ini environments excluded from boards-info.json Corrections: - RF frequency coverage stated as 433/315/868/915MHz - Removed references to the retired compatible.openmqttgateway.com site (BLE list is decoder.theengs.io), the discontinued Theengs Plug, and the private sponsor forum Claude-Session: https://claude.ai/code/session_01TYysQW8tpmt1dWWuzKhTLi Co-authored-by: Florian <1technophile@users.noreply.github.com> Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
674 B
674 B
Actuators
Compatible parts
| Module | Purpose |
|---|---|
| LED | Basic led |
| FASTLED | RGB Leds management |
| BUZZER | - |
| RELAY | Switch power circuit |
Pinout
| Module | Boards |
|---|---|
| RELAY | all output compatible pins |
| FASTLED | all output compatible pins |
Vcc pin of the board and the Module to a 5V supply source Ground pins of the board and the Module to the ground of the supply source.
Somfy RTS
For this actuator a 433.42 MHz RF transmitter is required. The standard 433.92 MHz transmitter don't work. The CC1101 Transceiver supports both 433.42 MHz and 433.92 MHz and can be used with the Somfy RTS actor. The wiring of the hardware is described in the RF gateway.