Lars Englund
0d1e7bbe75
* Made rf2 sending and receiving work With code from https://github.com/1technophile/OpenMQTTGateway/pull/109 plus some other fixes. * Added support for group bit Added support for sending and receiving group bit * Group bit and MQTT retransmitting Added support for sending and receiving group bit. Made the gateway transmit the new state of a RF2 switch to the MQTT state topic when it receives a MQTT command to control that switch. * Removed hard coded RF2 code length * Added support for dimming to RF2 Verified to work with Nexa WMR-250 dimmer. * Minor cleanup
106 lines
4.9 KiB
C
106 lines
4.9 KiB
C
/*
|
|
OpenMQTTGateway - ESP8266 or Arduino program for home automation
|
|
|
|
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
|
|
Send and receiving command by MQTT
|
|
|
|
This files enables to set your parameter for the radiofrequency gateways (ZgatewayRF and ZgatewayRF2) with RCswitch and newremoteswitch library
|
|
|
|
Copyright: (c)Florian ROBERT
|
|
|
|
This file is part of OpenMQTTGateway.
|
|
|
|
OpenMQTTGateway is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
OpenMQTTGateway is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/*-------------------RF topics & parameters----------------------*/
|
|
//433Mhz MQTT Subjects and keys
|
|
#define subjectMQTTtoRF "home/commands/MQTTto433"
|
|
#define subjectRFtoMQTT "home/433toMQTT"
|
|
#define subjectGTWRFtoMQTT "home/433toMQTT"
|
|
#define subjectRFtoMQTTprotocol "home/433toMQTT/protocol"
|
|
#define subjectRFtoMQTTbits "home/433toMQTT/bits"
|
|
#define subjectRFtoMQTTlength "home/433toMQTT/length"
|
|
#define RFprotocolKey "433_" // protocol will be defined if a subject contains RFprotocolKey followed by a value of 1 digit
|
|
#define RFbitsKey "RFBITS_" // bits will be defined if a subject contains RFbitsKey followed by a value of 2 digits
|
|
#define repeatRFwMQTT false // do we repeat a received signal by using mqtt
|
|
/*
|
|
RF supported protocols
|
|
433_1
|
|
433_2
|
|
433_3
|
|
433_4
|
|
433_5
|
|
433_6
|
|
*/
|
|
#define RFpulselengthKey "PLSL_" // pulselength will be defined if a subject contains RFprotocolKey followed by a value of 3 digits
|
|
// subject monitored to listen traffic processed by other gateways to store data and avoid ntuple
|
|
#define subjectMultiGTWRF "+/433toMQTT"
|
|
//RF number of signal repetition
|
|
#define RF_EMITTER_REPEAT 20
|
|
|
|
//variables to avoid duplicates for RF
|
|
#define time_avoid_duplicate 3000 // if you want to avoid duplicate mqtt message received set this to > 0, the value is the time in milliseconds during which we don't publish duplicates
|
|
|
|
/*-------------------RF2 topics & parameters----------------------*/
|
|
//433Mhz newremoteswitch MQTT Subjects and keys
|
|
#define subjectMQTTtoRF2 "home/commands/MQTTtoRF2"
|
|
#define subjectRF2toMQTT "home/RF2toMQTT"
|
|
#define RF2codeKey "CODE_" // code will be defined if a subject contains RF2codeKey followed by a value of 7 digits
|
|
#define RF2periodKey "PERIOD_" // period will be defined if a subject contains RF2periodKey followed by a value of 3 digits
|
|
#define RF2unitKey "UNIT_" // number of your unit value will be defined if a subject contains RF2unitKey followed by a value of 1-2 digits
|
|
#define RF2groupKey "GROUP_" // number of your group value will be defined if a subject contains RF2groupKey followed by a value of 1 digit
|
|
#define RF2dimKey "DIM_" // number of your dim value will be defined if a subject contains RF2dimKey followed by a value of 1-3 digits
|
|
|
|
/*-------------------PIN DEFINITIONS----------------------*/
|
|
#ifdef I2C_Wiring // With Support for I2C Modules
|
|
#define RF_EMITTER_PIN 15 //put 15 = D8 on nodemcu
|
|
#ifdef ESP8266
|
|
//RF PIN definition
|
|
#define RF_RECEIVER_PIN 0 // 0 = D3 on nodemcu
|
|
#else
|
|
//IMPORTANT NOTE: On arduino UNO connect IR emitter pin to D9 , comment #define IR_USE_TIMER2 and uncomment #define IR_USE_TIMER1 on library <library>IRremote/IRremoteInt.h so as to free pin D3 for RF RECEIVER PIN
|
|
//RF PIN definition
|
|
#define RF_RECEIVER_PIN 1 // 1 = D3 on arduino
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef Classic_Wiring // Without Support for I2C Modules
|
|
#define RF_EMITTER_PIN 4 //put 4 = D2 on nodemcu, 4 = D4 on arduino
|
|
#ifdef ESP8266
|
|
//RF PIN definition
|
|
#define RF_RECEIVER_PIN 5 // 5 = D1 on nodemcu
|
|
#else
|
|
//IMPORTANT NOTE: On arduino UNO connect IR emitter pin to D9 , comment #define IR_USE_TIMER2 and uncomment #define IR_USE_TIMER1 on library <library>IRremote/IRremoteInt.h so as to free pin D3 for RF RECEIVER PIN
|
|
//RF PIN definition
|
|
#define RF_RECEIVER_PIN 1 // 1 = D3 on arduino
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef RFM69_Wiring // Without Support for I2C Modules and HM10 or 11
|
|
#ifdef ESP8266
|
|
#define RF_RECEIVER_PIN 0 // 0 = D3 on nodemcu
|
|
#define RF_EMITTER_PIN 10 //put SD3 on nodemcu
|
|
#else
|
|
//IMPORTANT NOTE: On arduino UNO connect IR emitter pin to D9 , comment #define IR_USE_TIMER2 and uncomment #define IR_USE_TIMER1 on library <library>IRremote/IRremoteInt.h so as to free pin D3 for RF RECEIVER PIN
|
|
//RF PIN definition
|
|
#define RF_RECEIVER_PIN 1 // 1 = D3 on arduino
|
|
#define RF_EMITTER_PIN 4 //4 = D4 on arduino
|
|
#endif
|
|
#endif
|
|
|
|
|
|
|
|
|