Lars Englund
0d1e7bbe75
* Made rf2 sending and receiving work With code from https://github.com/1technophile/OpenMQTTGateway/pull/109 plus some other fixes. * Added support for group bit Added support for sending and receiving group bit * Group bit and MQTT retransmitting Added support for sending and receiving group bit. Made the gateway transmit the new state of a RF2 switch to the MQTT state topic when it receives a MQTT command to control that switch. * Removed hard coded RF2 code length * Added support for dimming to RF2 Verified to work with Nexa WMR-250 dimmer. * Minor cleanup
123 lines
5.1 KiB
C
123 lines
5.1 KiB
C
/*
|
|
OpenMQTTGateway - ESP8266 or Arduino program for home automation
|
|
|
|
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
|
|
Send and receiving command by MQTT
|
|
|
|
This program enables to:
|
|
- receive MQTT data from a topic and send RF 433Mhz signal corresponding to the received MQTT data
|
|
- publish MQTT data to a different topic related to received 433Mhz signal
|
|
- receive MQTT data from a topic and send IR signal corresponding to the received MQTT data
|
|
- publish MQTT data to a different topic related to received IR signal
|
|
- publish MQTT data to a different topic related to BLE devices rssi signal
|
|
|
|
Copyright: (c)Florian ROBERT
|
|
|
|
This file is part of OpenMQTTGateway.
|
|
|
|
OpenMQTTGateway is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
OpenMQTTGateway is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/*----------------------------USER PARAMETERS-----------------------------*/
|
|
#define SERIAL_BAUD 115200
|
|
/*-------------DEFINE YOUR WIRING TYPE BELOW----------------*/
|
|
// Choose between "I2C_Wiring" OR "Classic_Wiring" OR "RFM69_Wiring"
|
|
// Please Note: I2C Wiring,Classic Wiring and RFM69_Wiring uses different Pins for all Modules, see PIN definitions into the wiki
|
|
//#define I2C_Wiring // With Support for I2C Modules and the associated libraries BH1750 and BME280
|
|
//#define RFM69_Wiring // following file img/OpenMQTTGateway_IR_RF_RFM69.png
|
|
#define Classic_Wiring // following file img/OpenMQTTGateway_IR_RF_BT.png
|
|
/*-------------DEFINE YOUR NETWORK PARAMETERS BELOW----------------*/
|
|
//MQTT Parameters definition
|
|
#define mqtt_server "192.168.1.17"
|
|
//#define mqtt_user "your_username" // not compulsory only if your broker needs authentication
|
|
#define mqtt_password "your_password" // not compulsory only if your broker needs authentication
|
|
#define mqtt_port 1883
|
|
#define Gateway_Name "OpenMQTTGateway"
|
|
#define will_Topic "home/OpenMQTTGateway/LWT"
|
|
#define will_QoS 0
|
|
#define will_Retain true
|
|
#define will_Message "Offline"
|
|
#define Gateway_AnnouncementMsg "Online"
|
|
|
|
/*-------------DEFINE YOUR NETWORK PARAMETERS BELOW----------------*/
|
|
// Update these with values suitable for your network.
|
|
#ifdef ESP8266 // for nodemcu, weemos and esp8266
|
|
#define wifi_ssid "wifi ssid"
|
|
#define wifi_password "wifi password"
|
|
#else // for arduino + W5100
|
|
const byte mac[] = { 0xDE, 0xED, 0xBA, 0xFE, 0x54, 0x95 }; //W5100 ethernet shield mac adress
|
|
#endif
|
|
|
|
const byte ip[] = { 192, 168, 1, 99 }; //ip adress
|
|
// Advanced network config (optional) if you want to use these parameters uncomment line 158, 172 and comment line 171 of OpenMQTTGateway.ino
|
|
const byte gateway[] = { 192, 168, 1, 1 }; //ip adress
|
|
const byte Dns[] = { 192, 168, 1, 1 }; //ip adress
|
|
const byte subnet[] = { 255, 255, 255, 0 }; //ip adress
|
|
|
|
/*-------------DEFINE YOUR OTA PARAMETERS BELOW----------------*/
|
|
#define ota_hostname "OTAHOSTNAME"
|
|
#define ota_password "OTAPASSWORD"
|
|
#define ota_port 8266
|
|
|
|
/*-------------DEFINE THE MODULES YOU WANT BELOW----------------*/
|
|
//Addons and module management, comment the Z line and the config file if you don't use
|
|
#ifdef ESP8266 // for nodemcu, weemos and esp8266
|
|
#define ZsensorDHT
|
|
#include "config_DHT.h"
|
|
#define ZgatewayRF
|
|
#include "config_RF.h"
|
|
#define ZgatewayRF2
|
|
#ifdef RFM69_Wiring
|
|
#define ZgatewayRFM69
|
|
#include "config_RFM69.h"
|
|
#endif
|
|
#define ZgatewayIR
|
|
#include "config_IR.h"
|
|
#define ZgatewayBT
|
|
#include "config_BT.h"
|
|
#ifdef I2C_Wiring // to use the sensor below the gateway should wired with I2CWiring, see PIN DEFINITIONS below
|
|
#define ZsensorBH1750
|
|
#include "config_BH1750.h"
|
|
#define ZsensorBME280
|
|
#include "config_BME280.h"
|
|
#endif
|
|
#else // for arduino + W5100
|
|
#define ZgatewayRF
|
|
#include "config_RF.h"
|
|
//#define ZgatewayRF2 // too big for UNO
|
|
#ifdef RFM69_Wiring
|
|
//#define ZgatewayRFM69 not tested
|
|
//#include "config_RFM69.h"
|
|
#endif
|
|
#define ZgatewayIR
|
|
#include "config_IR.h"
|
|
#define ZgatewayBT
|
|
#include "config_BT.h"
|
|
//#define ZsensorDHT
|
|
//#include "config_DHT.h"
|
|
//#define ZsensorBH1750
|
|
//#include "config_BH1750.h"
|
|
//#define ZsensorBME280
|
|
//#include "config_BME280.h"
|
|
|
|
#endif/*----------------------------OTHER PARAMETERS-----------------------------*/
|
|
/*-------------------CHANGING THEM IS NOT COMPULSORY-----------------------*/
|
|
/*--------------MQTT general topics-----------------*/
|
|
// global MQTT subject listened by the gateway to execute commands (send RF, IR or others)
|
|
#define subjectMQTTtoX "home/commands/#"
|
|
#define subjectMultiGTWKey "toMQTT"
|
|
|
|
/*-------------------ACTIVATE TRACES----------------------*/
|
|
#define TRACE 1 // 0= trace off 1 = trace on
|