Florian
25991bfbb4
Publish the RN8209 depending on a threshold added to a frequency Also merge the 2 tasks into one to save heap
104 lines
3.1 KiB
Arduino
104 lines
3.1 KiB
Arduino
/*
|
|
OpenMQTTGateway Addon - ESP8266, ESP32 or Arduino program for home automation
|
|
|
|
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
|
|
Send and receiving command by MQTT
|
|
|
|
RN8209 reading Addon
|
|
|
|
Contributors:
|
|
- 1technophile
|
|
|
|
This file is part of OpenMQTTGateway.
|
|
|
|
OpenMQTTGateway is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
OpenMQTTGateway is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
#ifdef ZsensorRN8209
|
|
|
|
# include "ArduinoJson.h"
|
|
# include "driver/uart.h"
|
|
# include "rn8209_flash.h"
|
|
# include "rn8209c_user.h"
|
|
|
|
extern "C" bool init_8209c_interface();
|
|
|
|
float voltage = 0;
|
|
float current = 0;
|
|
float power = 0;
|
|
|
|
unsigned long PublishingTimerRN8209 = 0;
|
|
|
|
void rn8209_loop(void* mode) {
|
|
while (1) {
|
|
uint32_t temp_voltage = 0;
|
|
uint8_t retv = rn8209c_read_voltage(&temp_voltage);
|
|
uint8_t ret = rn8209c_read_emu_status();
|
|
uint8_t retc = 1;
|
|
uint8_t retp = 1;
|
|
float previousPower = 0;
|
|
if (ret) {
|
|
uint32_t temp_current = 0;
|
|
uint32_t temp_power = 0;
|
|
retc = rn8209c_read_current(phase_A, &temp_current);
|
|
retp = rn8209c_read_power(phase_A, &temp_power);
|
|
if (ret == 1) {
|
|
current = temp_current;
|
|
power = temp_power;
|
|
} else {
|
|
current = (int32_t)temp_current * (-1);
|
|
power = (int32_t)temp_power * (-1);
|
|
}
|
|
if (retc == 0) {
|
|
current = current / 10000.0;
|
|
overLimitCurrent(current);
|
|
}
|
|
}
|
|
StaticJsonDocument<128> doc;
|
|
JsonObject data = doc.to<JsonObject>();
|
|
if (retc == 0) {
|
|
data["current"] = current;
|
|
}
|
|
if (retv == 0) {
|
|
voltage = (float)temp_voltage / 1000.0;
|
|
data["volt"] = voltage;
|
|
}
|
|
if (retp == 0) {
|
|
power = power / 10000.0;
|
|
data["power"] = power;
|
|
}
|
|
unsigned long now = millis();
|
|
if ((now > (PublishingTimerRN8209 + TimeBetweenPublishingRN8209) ||
|
|
!PublishingTimerRN8209 ||
|
|
(abs(power - previousPower) > previousPower * PreviousPowerThreshold) && abs(power - previousPower) > MinPowerThreshold) &&
|
|
!ProcessLock) {
|
|
PublishingTimerRN8209 = millis();
|
|
previousPower = power;
|
|
if (data) pub(subjectRN8209toMQTT, data);
|
|
}
|
|
delay(TimeBetweenReadingRN8209);
|
|
}
|
|
}
|
|
|
|
void setupRN8209() {
|
|
STU_8209C cal = {0};
|
|
cal.Ku = RN8209_KU;
|
|
cal.Kia = RN8209_KIA;
|
|
cal.EC = RN8209_EC;
|
|
set_user_param(cal);
|
|
init_8209c_interface();
|
|
xTaskCreate(rn8209_loop, "rn8209_loop", RN8209_TASK_STACK_SIZE, NULL, 10, NULL);
|
|
Log.trace(F("ZsensorRN8209 setup done " CR));
|
|
}
|
|
|
|
#endif // ZsensorRN8209
|