chriz/OpenMQTT-Gateway
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 5 Wiki Activity
Files
2459e1c29b38f13fe470df985496853d7776422c
OpenMQTT-Gateway/main
T
History
Florian 2459e1c29b [RF] Change ESP8266 default RF_RECEIVER_GPIO from 0 to 4 (#2240) (#2323) 
GPIO0 (D3) is the ESP8266 boot strapping pin: an RF receiver holding the
data line low at reset forces the board into flash mode, so a stock
nodemcuv2-rf build never starts after a restart with the receiver wired
to the documented default pin. Default to GPIO4 (D2) instead, which the
docs already recommend as the workaround. Environments that need other
pins (srfb-direct, sonoff-rfr3, rf-wifi-gateway) already override the
value explicitly and are unaffected.
2026-06-14 16:28:01 -05:00
..
certs
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
rf
[SITE] Renew the web board presentation and the ESP32 web upload + [SYS] Security checks (#2277)
2026-03-09 07:47:30 -05:00
actuatorFASTLED.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
actuatorONOFF.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
actuatorPWM.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
actuatorSomfy.cpp
Refactor RF Configuration Management (#2245)
2025-12-07 09:56:15 -06:00
blufi.cpp
[SITE] Renew the web board presentation and the ESP32 web upload + [SYS] Security checks (#2277)
2026-03-09 07:47:30 -05:00
blufiSec.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
boardM5.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
boardTheengs.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
commonRF.cpp
[SITE] Renew the web board presentation and the ESP32 web upload + [SYS] Security checks (#2277)
2026-03-09 07:47:30 -05:00
config_2G.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_ADC.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_AHTx0.h
[BOARDS] Remove Arduino boards (#1929)
2024-04-10 15:48:05 -05:00
config_BH1750.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_BME280.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_BT.h
[MEM] Reduce ESP32 BLE firmware RAM usage (#2294)
2026-03-22 19:05:44 -05:00
config_C37_YL83_HMRD.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_DHT.h
[BOARDS] Remove Arduino boards (#1929)
2024-04-10 15:48:05 -05:00
config_DS1820.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_FASTLED.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_GFSunInverter.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_GPIOInput.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_GPIOKeyCode.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_HCSR04.h
[BOARDS] Remove Arduino boards (#1929)
2024-04-10 15:48:05 -05:00
config_HCSR501.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_HTU21.h
[BOARDS] Remove Arduino boards (#1929)
2024-04-10 15:48:05 -05:00
config_INA226.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_IR.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_LM75.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_LORA.h
[DISC] Ram usage and flash size optimization (#2223)
2025-08-17 06:27:42 -05:00
config_M5.h
[SYS][BREAKING] Add gateway states, Offline mode and refactor sleep (#2020)
2024-08-23 16:55:04 -05:00
config_MQ2.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_mqttDiscovery.h
[BLE] Add BM6 Battery Monitor connection support (#2274)
2026-01-24 17:16:03 -06:00
config_ONOFF.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_PWM.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_RF.h
[RF] Change ESP8266 default RF_RECEIVER_GPIO from 0 to 4 (#2240) (#2323)
2026-06-14 16:28:01 -05:00
config_RFM69.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_RN8209.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_SERIAL.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_SHTC3.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_Somfy.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_SRFB.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_SSD1306.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_TEMT6000.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_Touch.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_TSL2561.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_WeatherStation.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_WebContent.h
[BT] Default BLE AES key empty, skip decryption without a key (#2310)
2026-05-16 10:26:49 -05:00
config_WebUI.h
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
displaySSD1306.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
gateway2G.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
gatewayBLEConnect.cpp
[SITE] Renew the web board presentation and the ESP32 web upload + [SYS] Security checks (#2277)
2026-03-09 07:47:30 -05:00
gatewayBLEConnect.h
[BLE] Add BM6 Battery Monitor connection support (#2274)
2026-01-24 17:16:03 -06:00
gatewayBT.cpp
[SYS] Fix heap overflows from unbounded strcpy of MQTT input (#2321)
2026-06-06 09:35:27 -05:00
gatewayGFSunInverter.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
gatewayIR.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
gatewayLORA.cpp
[LORA] Fix syncword not persisting after reset (#2271)
2026-01-10 11:59:41 -06:00
gatewayPilight.cpp
Refactor RF Configuration Management (#2245)
2025-12-07 09:56:15 -06:00
gatewayRF2.cpp
Refactor RF Configuration Management (#2245)
2025-12-07 09:56:15 -06:00
gatewayRF.cpp
[SITE] Renew the web board presentation and the ESP32 web upload + [SYS] Security checks (#2277)
2026-03-09 07:47:30 -05:00
gatewayRFM69.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
gatewayRTL_433.cpp
Refactor RF Configuration Management (#2245)
2025-12-07 09:56:15 -06:00
gatewaySERIAL.cpp
[SITE] Renew the web board presentation and the ESP32 web upload + [SYS] Security checks (#2277)
2026-03-09 07:47:30 -05:00
gatewaySRFB.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
gatewayWeatherStation.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
main.cpp
[SYS] Fix heap overflows from unbounded strcpy of MQTT input (#2321)
2026-06-06 09:35:27 -05:00
mqttDiscovery.cpp
[BT] Omit state_class/unit_of_measurement for enum sensors in HA discovery (#2316)
2026-05-23 15:33:44 -05:00
sensorADC.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorAHTx0.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorBH1750.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorBME280.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorC37_YL83_HMRD.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorDHT.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorDS1820.cpp
[SITE] Renew the web board presentation and the ESP32 web upload + [SYS] Security checks (#2277)
2026-03-09 07:47:30 -05:00
sensorGPIOInput.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorGPIOKeyCode.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorHCSR04.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorHCSR501.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorHTU21.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorINA226.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorLM75.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorMQ2.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorRN8209.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorSHTC3.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorTEMT6000.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorTouch.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorTSL2561.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
TheengsCommon.h
[SITE] Renew the web board presentation and the ESP32 web upload + [SYS] Security checks (#2277)
2026-03-09 07:47:30 -05:00
User_config.h
[SYS] Add WiFi reconnect watchdog to self-heal from wedged WiFi stack (#2319)
2026-06-01 08:50:12 -05:00
webUI.cpp
[WebUI] Fix BLE config page connection reset on load (#2295)
2026-03-25 07:23:06 -05:00