Florian
bb8ba4ba60
add fastled doc add links to bootloaders and boot app0 Arduino IDE upload instructions add add community
1.6 KiB
1.6 KiB
Upload with Arduino IDE
- First download the last version of the Arduino IDE from the arduino website
- Add ESP32 boards by following this tutorial
- Add ESP8266 boards by following this tutorial
- Download OpenMQTTGateway code from the release page
- Download the libraries package corresponding to your board and module wished into the same page (example esp32-m5stick-c-ble-libraries.zip)
- Unzip the libraries into your arduino libraries folder (example D:/Users/XXXX/Documents/Arduino/libraries)
- Open the file main.ino from OpenMQTTGateway/main folder
- Change the settings and the desired gateways into user_config.h (uncomment the modules you want)
Example for the use of RF gateway
#define ZgatewayRF "RF" //ESP8266, Arduino, ESP32
//#define ZgatewayIR "IR" //ESP8266, Arduino, Sonoff RF Bridge
//#define ZgatewayLORA "LORA" //ESP8266, Arduino, ESP32
//#define ZgatewayPilight "Pilight" //ESP8266, Arduino, ESP32
//#define ZgatewayBT "BT" //ESP8266, ESP32
- Change the pins or parameters corresponding to the modules choosen, for RF you can change the pins into config_RF.h
- Choose the board on the Arduino IDE
- Select the port corresponding to the board
- Open the serial monitor and set 115200 bauds
- Upload ➡️
- You should see the logs into the serial monitor