Florian
d8dba15a81
* factoring of the publishing function * integration of json publishing to MQTT * receiving and transcode json messages from mqtt * replace the TRACE runtime condition by a buildtime one so as to decrease program size * remove retainFlag parameter not necessary for the moment * Increase the scope of tests for arduino mega and esp32 * Update arduinojson library to 5.13.3 * add macros to choose between simple or json publishing or both * differentiate build test for ATmega2560 * correct wrong sprintf definition * change IDE version for continuous integration * let default warning level in arduino ide * correct pins for ESP32 * reorganize user_config
48 lines
2.0 KiB
C
48 lines
2.0 KiB
C
/*
|
|
OpenMQTTGateway - ESP8266 or Arduino program for home automation
|
|
|
|
Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal and a MQTT broker
|
|
Send and receiving command by MQTT
|
|
|
|
This files exposes light level measured by a TSL2651 module
|
|
Heavily inspired by the driver for the BH1750 light sensor
|
|
|
|
Copyright: (c) Chris Broekema
|
|
|
|
This file is part of OpenMQTTGateway.
|
|
|
|
OpenMQTTGateway is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
OpenMQTTGateway is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
Connection Schemata:
|
|
--------------------
|
|
|
|
TSL2561 ------> Arduino Uno ----------> ESP8266
|
|
==============================================
|
|
Vcc ---------> 3.3V -----------------> Vu (3.3V)
|
|
GND ---------> GND ------------------> GND
|
|
SCL ---------> Pin A5 ---------------> D1
|
|
SDA ---------> Pin A4 ---------------> D2
|
|
ADD ---------> N/C (Not Connected) --> N/C (Not Connected)
|
|
|
|
*/
|
|
#define tsl2561_always true // if false only send current value if it has changed
|
|
#define TimeBetweenReadingtsl2561 30000
|
|
/*----------------------------USER PARAMETERS-----------------------------*/
|
|
/*-------------DEFINE YOUR MQTT PARAMETERS BELOW----------------*/
|
|
#define subjectTSL12561toMQTT Base_Topic Gateway_Name "/LIGHTtoMQTT"
|
|
|
|
//Time used to wait for an interval before resending measured values
|
|
unsigned long timetsl2561 = 0;
|
|
//int TSL2561_i2c_addr = 0x37; // Light Sensor I2C Address (Set in Adafruit library)
|