chriz/OpenMQTT-Gateway
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 5 Wiki Activity
Files
development
OpenMQTT-Gateway/main
T
History
Zhaoqi Xu 60aa84841d [INA226] Read the shunt voltage as a signed value (#2410) 
The shunt voltage register is a 16-bit two's complement value. The
old conversion tested `shuntvolt && 0x8000` (always true for a
non-zero reading) and then negated the complement of the zero-extended
value, which gives back the raw register value. Positive readings came
out right by accident, but a reverse current was published as a large
positive current (0xFFF0 -> 1.638 A instead of -0.4 mA with the
default 0.1 ohm shunt).

Cast the register to int16_t instead.

Fixes #2395

Signed-off-by: Zhaoqi Xu <lzy00419@outlook.com>
2026-10-15 05:20:38 -05:00
..
certs
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
rf
[SITE] Renew the web board presentation and the ESP32 web upload + [SYS] Security checks (#2277)
2026-03-09 07:47:30 -05:00
actuatorFASTLED.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
actuatorONOFF.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
actuatorPWM.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
actuatorSomfy.cpp
Refactor RF Configuration Management (#2245)
2025-12-07 09:56:15 -06:00
blufi.cpp
[SYS] Bound remaining MQTT/HTTP/BLE/RF inputs into fixed buffers (#2324)
2026-06-14 17:20:24 -05:00
blufiSec.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
boardM5.cpp
[SYS] Migrate M5 boards to M5Unified + M5GFX (modern platform) (#2355)
2026-08-15 16:45:35 -05:00
boardTheengs.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
commonRF.cpp
[RF] Deselect a secondary CC1101 chip-select on shared-SPI boards (#2363)
2026-08-24 08:17:15 -05:00
config_2G.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_ADC.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_AHTx0.h
[BOARDS] Remove Arduino boards (#1929)
2024-04-10 15:48:05 -05:00
config_BH1750.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_BME280.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_BT.h
[MEM] Reduce ESP32 BLE firmware RAM usage (#2294)
2026-03-22 19:05:44 -05:00
config_C37_YL83_HMRD.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_DHT.h
[BOARDS] Remove Arduino boards (#1929)
2024-04-10 15:48:05 -05:00
config_DS1820.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_FASTLED.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_GFSunInverter.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_GPIOInput.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_GPIOKeyCode.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_HCSR04.h
[BOARDS] Remove Arduino boards (#1929)
2024-04-10 15:48:05 -05:00
config_HCSR501.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_HTU21.h
[BOARDS] Remove Arduino boards (#1929)
2024-04-10 15:48:05 -05:00
config_INA226.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_IR.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_LM75.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_LORA.h
[DISC] Ram usage and flash size optimization (#2223)
2025-08-17 06:27:42 -05:00
config_M5.h
[SYS] Migrate M5 boards to M5Unified + M5GFX (modern platform) (#2355)
2026-08-15 16:45:35 -05:00
config_MQ2.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_mqttDiscovery.h
[BLE] Add BM6 Battery Monitor connection support (#2274)
2026-01-24 17:16:03 -06:00
config_ONOFF.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_PWM.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_RF.h
[RF] Change ESP8266 default RF_RECEIVER_GPIO from 0 to 4 (#2240) (#2323)
2026-06-14 16:28:01 -05:00
config_RFM69.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_RN8209.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_SERIAL.h
[SERIAL] Make SERIAL gateway frame format (data/parity/stop bits) configurable (#2342)
2026-07-28 19:05:18 -05:00
config_SHTC3.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_Somfy.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_SRFB.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_SSD1306.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_TEMT6000.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_Touch.h
[SERIAL] Enable SERIAL to X communication (#2068)
2024-09-26 06:55:26 -05:00
config_TSL2561.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_WeatherStation.h
[SYS] Update arduino core to 3.1.1 + refactor ino to cpp (#2177)
2025-05-06 19:35:50 -05:00
config_WebContent.h
[BT] Default BLE AES key empty, skip decryption without a key (#2310)
2026-05-16 10:26:49 -05:00
config_WebUI.h
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
displaySSD1306.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
gateway2G.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
gatewayBLEConnect.cpp
[SITE] Renew the web board presentation and the ESP32 web upload + [SYS] Security checks (#2277)
2026-03-09 07:47:30 -05:00
gatewayBLEConnect.h
[BLE] Add BM6 Battery Monitor connection support (#2274)
2026-01-24 17:16:03 -06:00
gatewayBT.cpp
[SYS] Bound remaining MQTT/HTTP/BLE/RF inputs into fixed buffers (#2324)
2026-06-14 17:20:24 -05:00
gatewayGFSunInverter.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
gatewayIR.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
gatewayLORA.cpp
[LORA] Fix buffer overflow when converting binary packets to hex (#2402)
2026-10-12 06:51:09 -05:00
gatewayPilight.cpp
Refactor RF Configuration Management (#2245)
2025-12-07 09:56:15 -06:00
gatewayRF2.cpp
Refactor RF Configuration Management (#2245)
2025-12-07 09:56:15 -06:00
gatewayRF.cpp
[SITE] Renew the web board presentation and the ESP32 web upload + [SYS] Security checks (#2277)
2026-03-09 07:47:30 -05:00
gatewayRFM69.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
gatewayRTL_433.cpp
[RF] rtl_433_ESP 6.2 (#2369)
2026-09-11 21:04:52 -05:00
gatewaySERIAL.cpp
[SERIAL] Make SERIAL gateway frame format (data/parity/stop bits) configurable (#2342)
2026-07-28 19:05:18 -05:00
gatewaySRFB.cpp
[SYS] Bound remaining MQTT/HTTP/BLE/RF inputs into fixed buffers (#2324)
2026-06-14 17:20:24 -05:00
gatewayWeatherStation.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
main.cpp
[WebUI] Show the active modules as text in the page heading (#2406)
2026-10-12 06:50:14 -05:00
mqttDiscovery.cpp
[DISC] Fix empty unique_id suffix for gateway entities (#2401)
2026-10-12 06:52:18 -05:00
sensorADC.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorAHTx0.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorBH1750.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorBME280.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorC37_YL83_HMRD.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorDHT.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorDS1820.cpp
[SITE] Renew the web board presentation and the ESP32 web upload + [SYS] Security checks (#2277)
2026-03-09 07:47:30 -05:00
sensorGPIOInput.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorGPIOKeyCode.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorHCSR04.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorHCSR501.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorHTU21.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorINA226.cpp
[INA226] Read the shunt voltage as a signed value (#2410)
2026-10-15 05:20:38 -05:00
sensorLM75.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorMQ2.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorRN8209.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorSHTC3.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorTEMT6000.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorTouch.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
sensorTSL2561.cpp
[SYS] Reduce Logs flash footprint (#2232)
2025-08-19 09:15:41 -05:00
TheengsCommon.h
[SITE] Renew the web board presentation and the ESP32 web upload + [SYS] Security checks (#2277)
2026-03-09 07:47:30 -05:00
User_config.h
[OTA] Resolve the offered version per build environment (#2350)
2026-08-10 06:33:13 -05:00
webUI.cpp
[WebUI] Show the active modules as text in the page heading (#2406)
2026-10-12 06:50:14 -05:00