f5b33104ef
Getting started: - New 15-minute Getting Started guide featuring the two most popular tracks (BLE on esp32dev-ble, RF on lilygo-rtl_433), with broker setup and a verification step - Sidebar restructured around the new-user journey; upload options numbered by ease; Gitpod upload method removed Home page: - VitePress hero with clear actions, larger hero image - How-it-works pipeline diagram shared as a component (responsive via container queries), use-case grid, bigger video tiles without the image lightbox, refreshed press coverage list, functions pills - Support section pointing to Theengs Bridge and github.com/sponsors/1technophile Upload flow: - Decision-oriented upload landing page (journey strip, method cards, comparison table) - Pre-flight checklist and driver troubleshooting on the web installer - Guided environment picker (bridge + hardware wizard) replacing the filter chips, with manifest-verified recommendations - Post-flash next-steps card linking to the portal and verification Board images: - custom_img key in environments.ini and board photos for all web-flashable environments (licenses recorded); private prod_env.ini environments excluded from boards-info.json Corrections: - RF frequency coverage stated as 433/315/868/915MHz - Removed references to the retired compatible.openmqttgateway.com site (BLE list is decoder.theengs.io), the discontinued Theengs Plug, and the private sponsor forum Claude-Session: https://claude.ai/code/session_01TYysQW8tpmt1dWWuzKhTLi Co-authored-by: Florian <1technophile@users.noreply.github.com> Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
969 B
969 B
IR gateway
Compatible parts
| Module | Purpose |
|---|---|
| IR diode | Emitting |
| IR receiver | Receiving |
| transistor 2N2222 | Amplify uC signal for the IR diode |
| 330 ohms resistor | - |
| 220 ohms resistor | limit current to LED |
The IR setup can work with bc547 and a 4x3 LED-Matrix.
Pinout
| Board | Receiver Pin | Emitter Pin |
|---|---|---|
| ESP8266 | D4 | D0 |
| ESP32 | 27/26 | 14 |
Connect the Emitter and Receiver to a 5V supply source, and the ground of your supply source to the ground of your board.
ESP8266 Hardware setup
ESP32 Hardware setup
Credits
This gateway exists thanks to the work done on IRRemote and IRremoteESP8266 libraries. Thanks for the works of contributors and especially @crankyoldgit for its active contributions.