f5b33104ef
Getting started: - New 15-minute Getting Started guide featuring the two most popular tracks (BLE on esp32dev-ble, RF on lilygo-rtl_433), with broker setup and a verification step - Sidebar restructured around the new-user journey; upload options numbered by ease; Gitpod upload method removed Home page: - VitePress hero with clear actions, larger hero image - How-it-works pipeline diagram shared as a component (responsive via container queries), use-case grid, bigger video tiles without the image lightbox, refreshed press coverage list, functions pills - Support section pointing to Theengs Bridge and github.com/sponsors/1technophile Upload flow: - Decision-oriented upload landing page (journey strip, method cards, comparison table) - Pre-flight checklist and driver troubleshooting on the web installer - Guided environment picker (bridge + hardware wizard) replacing the filter chips, with manifest-verified recommendations - Post-flash next-steps card linking to the portal and verification Board images: - custom_img key in environments.ini and board photos for all web-flashable environments (licenses recorded); private prod_env.ini environments excluded from boards-info.json Corrections: - RF frequency coverage stated as 433/315/868/915MHz - Removed references to the retired compatible.openmqttgateway.com site (BLE list is decoder.theengs.io), the discontinued Theengs Plug, and the private sponsor forum Claude-Session: https://claude.ai/code/session_01TYysQW8tpmt1dWWuzKhTLi Co-authored-by: Florian <1technophile@users.noreply.github.com> Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
739 B
739 B
GSM 2G gateway
Compatible parts
| Module | Purpose |
|---|---|
| A6 | GSM GPRS module |
| A7 | GSM GPRS module with GPS |
Hardware setup
| Module Pin | NodeMCU / ESP8266 Pin |
|---|---|
| H_RXD | D6 |
| H_TXD | D7 |
| GND | GND |
| VCC5 | MOSFET driven by D5 |
For VCC5 you can power it directly all the time with an USB cable or use a MOSFET like here
Don't use the nodemcu/wemos 5V pin for the A6/7 power, use a dedicated power supply for both or dedicated to the A6/7 with at least 2 amps ability.
So as to start your A6/7 module press the red button for 4 seconds, or link the PWR_KEY GPIO to VCC5.0 for the same time.
