[platformio]
default_envs = 
  esp32dev-ble-1
  esp32dev-ble-2
  env:nodemcuv2-ONOFFPILIGHT

;esp32 1
[env:esp32dev-ble-1]
platform = ${com.esp32_platform}
board = esp32dev
board_build.partitions = min_spiffs.csv
lib_deps =
  ${com-esp.lib_deps}
  ${libraries.ble}
build_flags = 
  ${com-esp.build_flags}
  '-DZgatewayBT="BT"'
  '-DGateway_Name="OpenMQTTGateway_ESP32_1"'
upload_protocol = espota
upload_port = 192.168.1.82
upload_flags =
  --auth=OTAPASSWORD
upload_speed = 512000
monitor_speed = 115200

;esp32 2
[env:esp32dev-ble-2]
platform = ${com.esp32_platform}
board = esp32dev
board_build.partitions = min_spiffs.csv
lib_deps =
  ${com-esp.lib_deps}
  ${libraries.ble}
build_flags = 
  ${com-esp.build_flags}
  '-DZgatewayBT="BT"'
  '-DGateway_Name="OpenMQTTGateway_ESP32_2"'
  ;-DCORE_DEBUG_LEVEL=4
upload_protocol = espota
upload_port = 192.168.1.111
upload_flags =
  --auth=OTAPASSWORD
upload_speed = 512000
monitor_speed = 115200

[env:nodemcuv2-ONOFFPILIGHT]
platform = ${com.esp8266_platform}
board = nodemcuv2
lib_deps =
  ${com-esp.lib_deps}
  ${libraries.esppilight}
  ${libraries.esp8266_mdns}
  ${libraries.wire}
build_flags = 
  ${com-esp.build_flags}
  '-DZgatewayPilight="Pilight"'
  '-DZactuatorONOFF="ONOFF"'
  '-DGateway_Name="OpenMQTTGateway_ESP8266_ONOFFRF"'
board_build.flash_mode = dout

[env:esp32-lolin32lite-ble-lp]
platform = ${com.esp32_platform}
board = lolin32
board_build.partitions = min_spiffs.csv
lib_deps =
  ${com-esp.lib_deps}
  ${libraries.ble}
build_flags =
  ${com-esp.build_flags}
  '-DZgatewayBT="BT"'
  '-DLED_RECEIVE=22'
  '-DLED_RECEIVE_ON=0'
  '-DGateway_Name="OpenMQTTGateway_LOLIN32LITE_LP"'
  '-DESPWifiManualSetup=true'
  '-Dwifi_ssid="MyWiFiAP"'
  '-Dwifi_password="MyWiFiAPPassword"'
  '-DMQTT_USER="lolin-esp32"'
  '-DMQTT_PASS="abcdefghi"'
  '-DMQTT_SERVER="192.168.1.17"'
  '-DDEFAULT_LOW_POWER_MODE=2'

;hacked Sonoff RF-Bridge
[env:sonoff-rfbridge-hacked]
platform = ${com.esp8266_platform}
board = esp8285
lib_deps = 
	${com-esp.lib_deps}
	${libraries.esppilight}
build_flags = 
	${com-esp.build_flags}
	'-DZgatewayPilight="Pilight"'
	'-DRF_RECEIVER_GPIO=4'
	'-DRF_EMITTER_GPIO=5'
	'-DLED_INFO=13'
	'-DLED_INFO_ON=0'
	'-DZsensorGPIOInput="GPIOInput"'
	'-DINPUT_GPIO=0'
	'-DGateway_Name="OpenMQTTGateway_SRFB_Direct"'
board_build.flash_mode = dout
board_build.ldscript = eagle.flash.1m64.ld ;this frees more space for firmware uplad via OTA.

;hacked Sonoff RF-Bridge OTA flash
[env:sonoff-rfbridge-hacked-ota]
upload_protocol = espota
upload_port = <ip> ;change this to the ip address of you SRFB
upload_speed = 512000
upload_flags = 
    --auth=OTAPASSWORD
    --port=8266
platform = ${com.esp8266_platform}
board = esp8285
lib_deps = 
	${com-esp.lib_deps}
	${libraries.esppilight}
build_flags = 
	${com-esp.build_flags}
	'-DZgatewayPilight="Pilight"'
	'-DRF_RECEIVER_GPIO=4'
	'-DRF_EMITTER_GPIO=5'
	'-DLED_INFO=13'
	'-DLED_INFO_ON=0'
	'-DZsensorGPIOInput="GPIOInput"'
	'-DINPUT_GPIO=0'
	'-DGateway_Name="OpenMQTTGateway_SRFB_Direct"'
board_build.flash_mode = dout
extra_scripts = scripts/compressFirmware.py
board_build.ldscript = eagle.flash.1m64.ld ;this frees more space for firmware uplad. Should also be uses for initial flash via serial