/*  
  OpenMQTTGateway  - ESP8266 or Arduino program for home automation 

   Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal  and a MQTT broker 
   Send and receiving command by MQTT
 
   This files enables to set your parameter for the bluetooth low energy gateway (beacons detection)
  
    Copyright: (c)Florian ROBERT
  
    This file is part of OpenMQTTGateway.
    
    OpenMQTTGateway is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    OpenMQTTGateway is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef config_BT_h
#define config_BT_h

extern void setupBT();
extern bool BTtoMQTT();
extern void MQTTtoBT(char* topicOri, JsonObject& RFdata);

/*----------------------BT topics & parameters-------------------------*/
#define subjectBTtoMQTT    "/BTtoMQTT"
#define subjectMQTTtoBTset "/commands/MQTTtoBT/config"
#define MinimumRSSI        -100 //default minimum rssi value, all the devices below -90 will not be reported

#ifndef Scan_duration
#  define Scan_duration 10000 //define the time for a scan --WARNING-- changing this value can lead to instability on ESP32
#endif
#ifndef ScanBeforeConnect
#  define ScanBeforeConnect 10 //define number of scans before connecting to BLE devices (ESP32 only, minimum 1)
#endif
#ifndef TimeBtwRead
#  define TimeBtwRead 55555 //define default time between 2 scans
#endif
#ifndef PublishOnlySensors
#  define PublishOnlySensors false //false if we publish all BLE devices discovered or true only the identified sensors (like temperature sensors)
#endif

#define HMSerialSpeed 9600 // Communication speed with the HM module, softwareserial doesn't support 115200
//#define HM_BLUE_LED_STOP true //uncomment to stop the blue led light of HM1X

#define BLEdelimiter       "4f4b2b444953413a" // OK+DISA:
#define BLEEndOfDiscovery  "4f4b2b4449534345" // OK+DISCE
#define BLEdelimiterLength 16
#define CRLR               "0d0a"
#define CRLR_Length        4

#define ServicedataMinLength 29

unsigned int BLEinterval = TimeBtwRead; //time between 2 scans
unsigned int BLEscanBeforeConnect = ScanBeforeConnect; //Number of BLE scans between connection cycles
bool publishOnlySensors = PublishOnlySensors;

#ifndef pubKnownBLEServiceData
#  define pubKnownBLEServiceData false // define true if you want to publish service data belonging to recognised sensors
#endif

#ifndef pubUnknownBLEServiceData
#  define pubUnknownBLEServiceData true // define false if you don't want to publish service data to unrecognised sensors (in case you are having too heavy service data) https://github.com/1technophile/OpenMQTTGateway/issues/318#issuecomment-446064707
#endif

#ifndef pubBLEManufacturerData
#  define pubBLEManufacturerData false // define true if you want to publish the manufacturer's data (sometimes contains characters that aren't valid with receiving client)
#endif

#ifndef pubBLEServiceUUID
#  define pubBLEServiceUUID false // define true if you want to publish the service UUID data
#endif

/*-------------------HOME ASSISTANT ROOM PRESENCE ----------------------*/
// if not commented Home presence integration with HOME ASSISTANT is activated
#define subjectHomePresence "home_presence/" // will send Home Assistant room presence message to this topic (first part is same for all rooms, second is room name)

enum ble_sensor_model {
  UNKNOWN_MODEL = -1,
  BEGINING = 0,
  HHCCJCY01HHCC,
  VEGTRUG,
  LYWSDCGQ,
  JQJCY01YM,
  LYWSD02, //5
  CGG1,
  CGP1W,
  MUE4094RT,
  CGD1,
  MIBAND, //10
  XMTZC04HM,
  XMTZC05HM,
  INKBIRD,
  LYWSD03MMC,
  MHO_C401,
  LYWSD03MMC_ATC,
  INODE_EM
};

/*-------------------PIN DEFINITIONS----------------------*/
#if !defined(BT_RX) || !defined(BT_TX)
#  ifdef ESP8266
#    define BT_RX 13 //D7 ESP8266 RX connect HM-10 or 11 TX
#    define BT_TX 12 //D6 ESP8266 TX connect HM-10 or 11 RX
#  elif defined(ESP32)
#    define BT_RX 18 // not tested
#    define BT_TX 19 // not tested
#  else
#    define BT_RX 5 //arduino RX connect HM-10 or 11 TX
#    define BT_TX 6 //arduino TX connect HM-10 or 11 RX
#  endif
#endif

#endif