/*  
  OpenMQTTGateway  - ESP8266 or Arduino program for home automation 

   Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal  and a MQTT broker 
   Send and receiving command by MQTT
 
   This files enables to set your parameter for the LORA gateway
  
    Copyright: (c)Florian ROBERT
  
    This file is part of OpenMQTTGateway.
    
    OpenMQTTGateway is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    OpenMQTTGateway is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef config_LORA_h
#define config_LORA_h

extern void setupLORA();
extern void LORAtoMQTT();
extern void MQTTtoLORA(char* topicOri, char* datacallback);
extern void MQTTtoLORA(char* topicOri, JsonObject& RFdata);
/*----------------------LORA topics & parameters-------------------------*/
#define subjectLORAtoMQTT    "/LORAtoMQTT"
#define subjectMQTTtoLORA    "/commands/MQTTtoLORA"
#define subjectGTWLORAtoMQTT "/LORAtoMQTT"
#define subjectMQTTtoLORAset "/commands/MQTTtoLORA/config"

//Default parameters used when the parameters are not set in the json data
#ifndef LORA_BAND
#  define LORA_BAND 868E6
#endif
#ifndef LORA_SIGNAL_BANDWIDTH
#  define LORA_SIGNAL_BANDWIDTH 125E3
#endif
#ifndef LORA_TX_POWER
#  define LORA_TX_POWER 14
#endif
#ifndef LORA_SPREADING_FACTOR
#  define LORA_SPREADING_FACTOR 7
#endif
#ifndef LORA_CODING_RATE
#  define LORA_CODING_RATE 5
#endif
#ifndef LORA_PREAMBLE_LENGTH
#  define LORA_PREAMBLE_LENGTH 8
#endif
#ifndef LORA_SYNC_WORD
#  define LORA_SYNC_WORD 0x12
#endif
#ifndef DEFAULT_CRC
#  define DEFAULT_CRC true
#endif
#ifndef INVERT_IQ
#  define INVERT_IQ false
#endif
#ifndef LORA_ONLY_KNOWN
#  define LORA_ONLY_KNOWN false
#endif

#define repeatLORAwMQTT false // do we repeat a received signal by using MQTT with LORA gateway

/*-------------------PIN DEFINITIONS----------------------*/

//TTGO LORA BOARD ESP32 PIN DEFINITION

#ifndef LORA_SCK
#  define LORA_SCK 5 // GPIO5  -- SX1278's SCK
#endif

#ifndef LORA_MISO
#  define LORA_MISO 19 // GPIO19 -- SX1278's MISO
#endif

#ifndef LORA_MOSI
#  define LORA_MOSI 27 // GPIO27 -- SX1278's MOSI
#endif

#ifndef LORA_SS
#  define LORA_SS 18 // GPIO18 -- SX1278's CS
#endif

#ifndef LORA_RST
#  define LORA_RST 14 // GPIO14 -- SX1278's RESET
#endif

#ifndef LORA_DI0
#  define LORA_DI0 26 // GPIO26 -- SX1278's IRQ(Interrupt Request)
#endif

struct LORAConfig_s {
  long frequency;
  int txPower;
  int spreadingFactor;
  long signalBandwidth;
  int codingRateDenominator;
  int preambleLength;
  byte syncWord;
  bool crc;
  bool invertIQ;
  bool onlyKnown;
};

#ifdef ZmqttDiscovery
extern void launchLORADiscovery(bool overrideDiscovery);
// This structure stores the entities of the devices and is they have been discovered or not
// The uniqueId is composed of the device id + the key

#  define uniqueIdSize  30
#  define modelNameSize 30

struct LORAdevice {
  char uniqueId[uniqueIdSize];
  char modelName[modelNameSize];
  bool isDisc;
};

const char LORAparameters[3][4][12] = {
    // LORA key, name, unit, device_class
    {"tempc", "temperature", "°C", "temperature"},
    {"hum", "humidity", "%", "humidity"},
    {"moi", "moisture", "%", "humidity"}};

#endif

#endif