/****************************************************************************** I2C_ReadAllData.ino BME280 Arduino and Teensy example Marshall Taylor @ SparkFun Electronics May 20, 2015 https://github.com/sparkfun/SparkFun_BME280_Arduino_Library This sketch configures the BME280 to read all measurements. The sketch also displays the BME280's physical memory and what the driver perceives the calibration words to be. Resources: Uses Wire.h for I2C operation Uses SPI.h for SPI operation Development environment specifics: Arduino IDE 1.6.4 Teensy loader 1.23 This code is released under the [MIT License](http://opensource.org/licenses/MIT). Please review the LICENSE.md file included with this example. If you have any questions or concerns with licensing, please contact techsupport@sparkfun.com. Distributed as-is; no warranty is given. ******************************************************************************/ #include #include "SparkFunBME280.h" //Library allows either I2C or SPI, so include both. #include "Wire.h" #include "SPI.h" //Global sensor object BME280 mySensor; void setup() { //***Driver settings********************************// //commInterface can be I2C_MODE or SPI_MODE //specify chipSelectPin using arduino pin names //specify I2C address. Can be 0x77(default) or 0x76 //For I2C, enable the following and disable the SPI section mySensor.settings.commInterface = I2C_MODE; mySensor.settings.I2CAddress = 0x77; //For SPI enable the following and dissable the I2C section //mySensor.settings.commInterface = SPI_MODE; //mySensor.settings.chipSelectPin = 10; //***Operation settings*****************************// //renMode can be: // 0, Sleep mode // 1 or 2, Forced mode // 3, Normal mode mySensor.settings.runMode = 3; //Normal mode //tStandby can be: // 0, 0.5ms // 1, 62.5ms // 2, 125ms // 3, 250ms // 4, 500ms // 5, 1000ms // 6, 10ms // 7, 20ms mySensor.settings.tStandby = 0; //filter can be off or number of FIR coefficients to use: // 0, filter off // 1, coefficients = 2 // 2, coefficients = 4 // 3, coefficients = 8 // 4, coefficients = 16 mySensor.settings.filter = 0; //tempOverSample can be: // 0, skipped // 1 through 5, oversampling *1, *2, *4, *8, *16 respectively mySensor.settings.tempOverSample = 1; //pressOverSample can be: // 0, skipped // 1 through 5, oversampling *1, *2, *4, *8, *16 respectively mySensor.settings.pressOverSample = 1; //humidOverSample can be: // 0, skipped // 1 through 5, oversampling *1, *2, *4, *8, *16 respectively mySensor.settings.humidOverSample = 1; Serial.begin(57600); Serial.print("Program Started\n"); Serial.print("Starting BME280... result of .begin(): 0x"); //Calling .begin() causes the settings to be loaded delay(10); //Make sure sensor had enough time to turn on. BME280 requires 2ms to start up. Serial.println(mySensor.begin(), HEX); Serial.print("Displaying ID, reset and ctrl regs\n"); Serial.print("ID(0xD0): 0x"); Serial.println(mySensor.readRegister(BME280_CHIP_ID_REG), HEX); Serial.print("Reset register(0xE0): 0x"); Serial.println(mySensor.readRegister(BME280_RST_REG), HEX); Serial.print("ctrl_meas(0xF4): 0x"); Serial.println(mySensor.readRegister(BME280_CTRL_MEAS_REG), HEX); Serial.print("ctrl_hum(0xF2): 0x"); Serial.println(mySensor.readRegister(BME280_CTRL_HUMIDITY_REG), HEX); Serial.print("\n\n"); Serial.print("Displaying all regs\n"); uint8_t memCounter = 0x80; uint8_t tempReadData; for(int rowi = 8; rowi < 16; rowi++ ) { Serial.print("0x"); Serial.print(rowi, HEX); Serial.print("0:"); for(int coli = 0; coli < 16; coli++ ) { tempReadData = mySensor.readRegister(memCounter); Serial.print((tempReadData >> 4) & 0x0F, HEX);//Print first hex nibble Serial.print(tempReadData & 0x0F, HEX);//Print second hex nibble Serial.print(" "); memCounter++; } Serial.print("\n"); } Serial.print("\n\n"); Serial.print("Displaying concatenated calibration words\n"); Serial.print("dig_T1, uint16: "); Serial.println(mySensor.calibration.dig_T1); Serial.print("dig_T2, int16: "); Serial.println(mySensor.calibration.dig_T2); Serial.print("dig_T3, int16: "); Serial.println(mySensor.calibration.dig_T3); Serial.print("dig_P1, uint16: "); Serial.println(mySensor.calibration.dig_P1); Serial.print("dig_P2, int16: "); Serial.println(mySensor.calibration.dig_P2); Serial.print("dig_P3, int16: "); Serial.println(mySensor.calibration.dig_P3); Serial.print("dig_P4, int16: "); Serial.println(mySensor.calibration.dig_P4); Serial.print("dig_P5, int16: "); Serial.println(mySensor.calibration.dig_P5); Serial.print("dig_P6, int16: "); Serial.println(mySensor.calibration.dig_P6); Serial.print("dig_P7, int16: "); Serial.println(mySensor.calibration.dig_P7); Serial.print("dig_P8, int16: "); Serial.println(mySensor.calibration.dig_P8); Serial.print("dig_P9, int16: "); Serial.println(mySensor.calibration.dig_P9); Serial.print("dig_H1, uint8: "); Serial.println(mySensor.calibration.dig_H1); Serial.print("dig_H2, int16: "); Serial.println(mySensor.calibration.dig_H2); Serial.print("dig_H3, uint8: "); Serial.println(mySensor.calibration.dig_H3); Serial.print("dig_H4, int16: "); Serial.println(mySensor.calibration.dig_H4); Serial.print("dig_H5, int16: "); Serial.println(mySensor.calibration.dig_H5); Serial.print("dig_H6, uint8: "); Serial.println(mySensor.calibration.dig_H6); Serial.println(); } void loop() { //Each loop, take a reading. //Start with temperature, as that data is needed for accurate compensation. //Reading the temperature updates the compensators of the other functions //in the background. Serial.print("Temperature: "); Serial.print(mySensor.readTempC(), 2); Serial.println(" degrees C"); Serial.print("Temperature: "); Serial.print(mySensor.readTempF(), 2); Serial.println(" degrees F"); Serial.print("Pressure: "); Serial.print(mySensor.readFloatPressure(), 2); Serial.println(" Pa"); Serial.print("Altitude: "); Serial.print(mySensor.readFloatAltitudeMeters(), 2); Serial.println("m"); Serial.print("Altitude: "); Serial.print(mySensor.readFloatAltitudeFeet(), 2); Serial.println("ft"); Serial.print("%RH: "); Serial.print(mySensor.readFloatHumidity(), 2); Serial.println(" %"); Serial.println(); delay(1000); }