/*  
  OpenMQTTGateway  - ESP8266 or Arduino program for home automation 

   Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal  and a MQTT broker 
   Send and receiving command by MQTT
 
   This files enables to set your parameter for the esp32's touch buttons
  
    Copyright: (c) Florian Xhumari
    Uses work by Florian ROBERT
  
    This file is part of OpenMQTTGateway.
    
    OpenMQTTGateway is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    OpenMQTTGateway is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef config_Touch_h
#define config_Touch_h

extern void setupTouch();
extern void touchToMQTT();
/*----------------------------USER PARAMETERS-----------------------------*/
/*-------------DEFINE YOUR MQTT PARAMETERS BELOW----------------*/
#define TOUCHTOPIC "/touchToMQTT"

// Time between readings of the touch sensor. Don't make it too short, as
// reading one touch sensor takes 0.5 ms.
#if !defined(TOUCH_TIME_BETWEEN_READINGS) || (TOUCH_TIME_BETWEEN_READINGS) < 10
#  define TOUCH_TIME_BETWEEN_READINGS 30
#endif

// We take the average reading of the sensor, and consider as "touched" state
// any reading less than average * TOUCH_THRESHOLD / 100.
#if !defined(TOUCH_THRESHOLD)
#  define TOUCH_THRESHOLD 75
#endif

// Minimum duration of "touched" state to generate a touch event. By default,
// we'll wait 3 readings indicating "touched" in order to generate a touch event.
#if !defined(TOUCH_MIN_DURATION) || (TOUCH_MIN_DURATION < 10)
#  define TOUCH_MIN_DURATION 90
#endif

// After a touch was sensed, don't consider changes to "touched" status
// for this duration.
#if !defined(TOUCH_DEBOUNCE_TIME) || (TOUCH_DEBOUNCE_TIME < 100)
#  define TOUCH_DEBOUNCE_TIME 200
#endif

/****************************************
 *
 * One can define TOUCH_GPIO, or TOUCH_GPIO_0 through TOUCH_GPIO_9 to
 * include up to 10 sensors.
 * 
 * By default there's only one sensor at TOUCH_GPIO, default to
 * pin 4 (T0).
 * 
 ****************************************/

#if defined(TOUCH_GPIO) && !defined(TOUCH_GPIO_0)
#  define TOUCH_GPIO_0 (TOUCH_GPIO)
#endif

#if !defined(TOUCH_GPIO_0)
// T0 == GPIO 4
#  define TOUCH_GPIO_0 T0
#endif

#if defined(TOUCH_GPIO_1) && defined(TOUCH_GPIO_2) && defined(TOUCH_GPIO_3) && defined(TOUCH_GPIO_4) && defined(TOUCH_GPIO_5) && defined(TOUCH_GPIO_6) && defined(TOUCH_GPIO_7) && defined(TOUCH_GPIO_8) && defined(TOUCH_GPIO_9)
#  define TOUCH_SENSORS 10
#elif defined(TOUCH_GPIO_1) && defined(TOUCH_GPIO_2) && defined(TOUCH_GPIO_3) && defined(TOUCH_GPIO_4) && defined(TOUCH_GPIO_5) && defined(TOUCH_GPIO_6) && defined(TOUCH_GPIO_7) && defined(TOUCH_GPIO_8)
#  define TOUCH_SENSORS 9
#elif defined(TOUCH_GPIO_1) && defined(TOUCH_GPIO_2) && defined(TOUCH_GPIO_3) && defined(TOUCH_GPIO_4) && defined(TOUCH_GPIO_5) && defined(TOUCH_GPIO_6) && defined(TOUCH_GPIO_7)
#  define TOUCH_SENSORS 8
#elif defined(TOUCH_GPIO_1) && defined(TOUCH_GPIO_2) && defined(TOUCH_GPIO_3) && defined(TOUCH_GPIO_4) && defined(TOUCH_GPIO_5) && defined(TOUCH_GPIO_6)
#  define TOUCH_SENSORS 7
#elif defined(TOUCH_GPIO_1) && defined(TOUCH_GPIO_2) && defined(TOUCH_GPIO_3) && defined(TOUCH_GPIO_4) && defined(TOUCH_GPIO_5)
#  define TOUCH_SENSORS 6
#elif defined(TOUCH_GPIO_1) && defined(TOUCH_GPIO_2) && defined(TOUCH_GPIO_3) && defined(TOUCH_GPIO_4)
#  define TOUCH_SENSORS 5
#elif defined(TOUCH_GPIO_1) && defined(TOUCH_GPIO_2) && defined(TOUCH_GPIO_3)
#  define TOUCH_SENSORS 4
#elif defined(TOUCH_GPIO_1) && defined(TOUCH_GPIO_2)
#  define TOUCH_SENSORS 3
#elif defined(TOUCH_GPIO_1)
#  define TOUCH_SENSORS 2
#else
#  define TOUCH_SENSORS 1
#endif

#endif