/*
OpenMQTTGateway Addon - ESP8266 or Arduino program for home automation
Act as a gateway between your 433mhz, infrared IR, BLE, LoRa signal and one interface like an MQTT broker
Send and receiving command by MQTT
This is the Home Assistant MQTT Discovery addon.
Copyright: (c) Rafal Herok
This file is part of OpenMQTTGateway.
OpenMQTTGateway is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
OpenMQTTGateway is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
#include "User_config.h"
#ifdef ZmqttDiscovery
# include "TheengsCommon.h"
# ifdef ESP8266
# include
# elif defined(ESP32)
# include
# include "esp_mac.h"
# endif
# ifdef ESP32_ETHERNET
# include
# endif
# include "config_mqttDiscovery.h"
extern bool ethConnected;
extern JsonArray modules;
// Using Home Assistant MQTT abbreviations to shorten names as per https://github.com/home-assistant/core/blob/dev/homeassistant/components/mqtt/abbreviations.py
char discovery_prefix[parameters_size + 1] = discovery_Prefix;
// From https://github.com/home-assistant/core/blob/d7ac4bd65379e11461c7ce0893d3533d8d8b8cbf/homeassistant/const.py#L225
// List of classes available in Home Assistant
const char* availableHASSClasses[] = {"battery_charging",
"battery",
"carbon_dioxide",
"carbon_monoxide",
"connectivity",
"current",
"data_size",
"distance",
"door",
"duration",
"energy",
"enum",
"frequency",
"gas",
"humidity",
"illuminance",
"irradiance",
"lock",
"motion",
"moving",
"occupancy",
"pm1",
"pm10",
"pm25",
"power_factor",
"power",
"precipitation_intensity",
"precipitation",
"pressure",
"problem",
"restart",
"signal_strength",
"sound_pressure",
"temperature",
"timestamp",
"voltage",
"water",
"weight",
"wind_speed",
"window"};
// From https://github.com/home-assistant/core/blob/d7ac4bd65379e11461c7ce0893d3533d8d8b8cbf/homeassistant/const.py#L379
// List of units available in Home Assistant
const char* availableHASSUnits[] = {"A",
"B",
"UV index",
"V",
"W",
"W",
"bpm",
"bar",
"cm",
"dB",
"dBm",
"ft",
"h",
"hPa",
"Hz",
"kg",
"kW",
"kWh",
"km/h",
"lb",
"lx",
"m/s",
"m/s²",
"m³",
"mg/m³",
"min",
"mm",
"mm/h",
"ms",
"mV",
"µS/cm",
"μg/m³",
"Ω",
"%",
"°",
"°C",
"°F",
"s",
"wb²"
};
String getMacAddress() {
uint8_t baseMac[6];
char baseMacChr[13] = {0};
# if defined(ESP8266)
WiFi.macAddress(baseMac);
sprintf(baseMacChr, "%02X%02X%02X%02X%02X%02X", baseMac[0], baseMac[1], baseMac[2], baseMac[3], baseMac[4], baseMac[5]);
# elif defined(ESP32)
esp_read_mac(baseMac, ESP_MAC_WIFI_STA);
sprintf(baseMacChr, "%02X%02X%02X%02X%02X%02X", baseMac[0], baseMac[1], baseMac[2], baseMac[3], baseMac[4], baseMac[5]);
# else
sprintf(baseMacChr, "%02X%02X%02X%02X%02X%02X", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
# endif
return String(baseMacChr);
}
String getUniqueId(String name, String sufix) {
String uniqueId = (String)getMacAddress() + "-" + name + sufix;
return String(uniqueId);
}
# if defined(ZgatewayBT) || defined(SecondaryModule)
# include "config_BT.h"
/**
* Create a discover messages form a list of attribute
*
* @param mac the MAC address
* @param sensorList[][0] = component type
* @param sensorList[][1] = name
* @param sensorList[][2] = availability topic
* @param sensorList[][3] = device class
* @param sensorList[][4] = value template
* @param sensorList[][5] = payload on
* @param sensorList[][6] = payload off
* @param sensorList[][7] = unit of measurement
* @param sensorList[][8] = unit of measurement
* @param sensorCount number of sensor
* @param device_name name of sensors
* @param device_manufacturer name of manufacturer
* @param device_model the model
* */
void createDiscoveryFromList(const char* mac,
const char* sensorList[][9],
int sensorCount,
const char* device_name,
const char* device_manufacturer,
const char* device_model) {
for (int i = 0; i < sensorCount; i++) {
String discovery_topic = String(subjectBTtoMQTT) + "/" + String(mac);
String unique_id = String(mac) + "-" + sensorList[i][1];
createDiscovery(sensorList[i][0],
discovery_topic.c_str(), sensorList[i][1], unique_id.c_str(),
will_Topic, sensorList[i][3], sensorList[i][4],
sensorList[i][5], sensorList[i][6], sensorList[i][7],
0, "", "", false, "",
device_name, device_manufacturer, device_model, mac, false,
sensorList[i][8] //The state class
);
}
}
# endif
/**
* @brief Announce that the Gateway have the ability to raise Trigger.
* This function provide the configuration of the MQTT Device trigger ( @see https://www.home-assistant.io/integrations/device_trigger.mqtt/ ).
* All messages published by this function will be interpreted as configuration messages of Gateway Triggers.
* Instead, all messages published on the "triggerTopic" will be interpreted as Gateway trigger.
*
* @param triggerTopic Mandatory - The MQTT topic subscribed to receive trigger events.
* @param type The type of the trigger, e.g. button_short_press. Entries supported by the HA Frontend: button_short_press, button_short_release, button_long_press, button_long_release, button_double_press, button_triple_press, button_quadruple_press, button_quintuple_press. If set to an unsupported value, will render as subtype type, e.g. button_1 spammed with type set to spammed and subtype set to button_1
* @param subtype The subtype of the trigger, e.g. button_1. Entries supported by the HA frontend: turn_on, turn_off, button_1, button_2, button_3, button_4, button_5, button_6. If set to an unsupported value, will render as subtype type, e.g. left_button pressed with type set to button_short_press and subtype set to left_button
* @param object_id The object_id of the trigger.
* @param value_template The template to render the value of the trigger. The template can use the variables trigger.id, trigger.type, trigger.subtype, trigger.payload, trigger.payload_json, trigger.topic, trigger.timestamp, trigger.value, trigger.value_json. The template can be a string or a JSON object. If the template is a JSON object, it must be a valid JSON object. If the template is a string, it will be rendered as a string. If the template is a JSON object, it will be rendered as a JSON object.
*/
void announceGatewayTrigger(const char* triggerTopic,
const char* type,
const char* subtype,
const char* object_id,
const char* value_template) {
//Create The Json
StaticJsonDocument jsonBuffer;
JsonObject sensor = jsonBuffer.to();
/**
* The type of automation, must be ‘trigger’.
* @see https://www.home-assistant.io/integrations/device_trigger.mqtt/#automation_type
*/
sensor["atype"] = "trigger"; // automation_type
/**
* Must be device_automation. Only allowed and required in MQTT auto discovery device messages.
* @see https://www.home-assistant.io/integrations/device_trigger.mqtt/#platform
* @see https://www.home-assistant.io/integrations/mqtt/#device-discovery-payload
*/
sensor["p"] = "device_automation"; // platform
// The MQTT topic subscribed to receive trigger events.
if (triggerTopic && triggerTopic[0]) {
char state_topic[mqtt_topic_max_size];
strcpy(state_topic, mqtt_topic);
strcat(state_topic, gateway_name);
strcat(state_topic, triggerTopic);
/**
* "info_topic" is not a standard field, for the message is required the filed "topic", but this filed is reserved and it is used to know where to publish the topic.
* If we want to send on the message the topic information is usefull to use this "info_topic" that will be not delete by the send function but converted to "topic"
*/
sensor["info_topic"] = state_topic;
} else {
Log.error(F("[RF] Error: topic is mandatory for device trigger Discovery" CR));
return;
}
/**
* The type of the trigger, e.g. button_short_press.
* Entries supported by the HA frontend: button_short_press, button_short_release, button_long_press, button_long_release, button_double_press, button_triple_press, button_quadruple_press, button_quintuple_press.
* If set to an unsupported value, will render as subtype type, e.g. button_1 spammed with type set to spammed and subtype set to button_1
*/
if (type && type[0] != 0) {
sensor["type"] = type;
} else {
sensor["type"] = "button_short_press";
}
/**
* The subtype of the trigger, e.g. turn_on.
* Entries supported by the frontend: turn_on, turn_off, button_1, button_2, button_3, button_4, button_5, button_6.
* If set to an unsupported value, will render as subtype type, e.g. left_button pressed with type set to button_short_press and subtype set to left_button
*/
if (subtype && subtype[0] != 0) {
sensor["stype"] = subtype; // subtype
} else {
sensor["stype"] = "turn_on";
}
// ------------------ START DEVICE DECLARATION --------------------------------------------------
// TODO: This section, like the almost identical one in createDiscovery, should be placed in a
// separate function and managed specifically to avoid errors in representing the device
// in the HASS world.
// -------------------------------------------------------------------------------------------------
// Information about the device: this device trigger is a part of to tie it into the HA device registry.
StaticJsonDocument jsonDeviceBuffer;
JsonObject device = jsonDeviceBuffer.to();
// A link to the webpage that can manage the configuration of this device.
if (ethConnected) {
# ifdef ESP32_ETHERNET
device["cu"] = String("http://") + String(ETH.localIP().toString()) + String("/"); // configuration_url
# endif
} else {
device["cu"] = String("http://") + String(WiFi.localIP().toString()) + String("/"); // configuration_url
}
/*
* A list of connections of the device to the outside world as a list of tuples [connection_type, connection_identifier].
* For example the MAC address of a network interface: "connections": [["mac", "02:5b:26:a8:dc:12"]].
*/
JsonArray connections = device.createNestedArray("cns"); // connections
JsonArray connection_mac = connections.createNestedArray();
connection_mac.add("mac");
connection_mac.add(getMacAddress());
// A list of IDs that uniquely identify the device. For example a serial number.
String unique_id = String(getMacAddress());
JsonArray identifiers = device.createNestedArray("ids"); // identifiers
identifiers.add(unique_id);
// The manufacturer of the device.
device["mf"] = GATEWAY_MANUFACTURER;
// The model of the device.
# ifndef GATEWAY_MODEL
String model = "";
serializeJson(modules, model);
device["mdl"] = model;
# else
device["mdl"] = GATEWAY_MODEL;
# endif
// The name of the device.
device["name"] = String(gateway_name);
device["sw"] = OMG_VERSION;
// ------------------ END DEVICE DECLARATION ------------------ //
sensor["dev"] = device; //device representing the board
if (value_template && value_template[0]) {
sensor["val_tpl"] = String(value_template);
}
/* Publish on the topic
The discovery topic needs to be: /device_automation/[/]/config.
Note that only one trigger may be defined per unique discovery topic.
Also note that the combination of type and subtype should be unique for a device.
*/
String topic_to_publish = String(discovery_prefix) + "/device_automation/" + String(unique_id) + "/" + object_id + "/config";
Log.trace(F("Announce Gatewy Trigger %s" CR), topic_to_publish.c_str());
sensor["topic"] = topic_to_publish;
sensor["retain"] = true;
enqueueJsonObject(sensor);
}
/*
* Remove a substring p from a given string s
*/
std::string remove_substring(std::string s, const std::string& p) {
std::string::size_type n = p.length();
for (std::string::size_type i = s.find(p);
i != std::string::npos;
i = s.find(p))
s.erase(i, n);
return s;
}
/**
* @brief Generate message and publish it on an MQTT discovery explorer. For HA @see https://www.home-assistant.io/docs/mqtt/discovery/
*
* @param sensor_type the Type
* @param st_topic set state topic,
* @param s_name set name,
* @param unique_id set uniqueId
* @param availability_topic set availability_topic,
* @param device_class set device_class,
* @param value_template set value_template,
* @param payload_on set payload_on,
* @param payload_off set payload_off,
* @param unit_of_meas set unit_of_meas,
* @param off_delay set off_delay
* @param payload_available set payload_available,
* @param payload_not_available set payload_not_available
* @param gateway_entity set is a gateway entity,
* @param cmd_topic set command topic
* @param device_name set device name,
* @param device_manufacturer set device manufacturer,
* @param device_model set device model,
* @param device_id set device(BLE)/entity(RTL_433) identification,
* @param retainCmd set retain
* @param state_class set state class
*
* */
void createDiscovery(const char* sensor_type,
const char* st_topic, const char* s_name, const char* unique_id,
const char* availability_topic, const char* device_class, const char* value_template,
const char* payload_on, const char* payload_off, const char* unit_of_meas,
int off_delay,
const char* payload_available, const char* payload_not_available, bool gateway_entity, const char* cmd_topic,
const char* device_name, const char* device_manufacturer, const char* device_model, const char* device_id, bool retainCmd,
const char* state_class, const char* state_off, const char* state_on, const char* enum_options, const char* command_template) {
StaticJsonDocument jsonBuffer;
JsonObject sensor = jsonBuffer.to();
// If a component cannot render it's state (f.i. KAKU relays) no state topic
// should be added. Without a state topic HA will use optimistic mode for the
// component by default. The Home Assistant UI for optimistic switches
// (separate on and off icons) allows for multiple
// subsequent on commands. This is required for dimming on KAKU relays like
// the ACM-300.
if (st_topic && st_topic[0]) {
char state_topic[mqtt_topic_max_size];
// If not an entity belonging to the gateway we put wild card for the location and gateway name
// allowing to have the entity detected by several gateways and a consistent discovery topic among the gateways
if (gateway_entity) {
strcpy(state_topic, mqtt_topic);
strcat(state_topic, gateway_name);
} else {
strcpy(state_topic, "+/+");
}
strcat(state_topic, st_topic);
if (strcmp(sensor_type, "cover") == 0 && strcmp(state_class, "blind") == 0) {
sensor["tilt_status_t"] = state_topic; // tilt_status_topic for blind
} else if (strcmp(sensor_type, "cover") == 0 && strcmp(state_class, "curtain") == 0) {
sensor["pos_t"] = state_topic; // position_topic for curtain
} else {
sensor["stat_t"] = state_topic;
}
}
if (availability_topic && availability_topic[0] && gateway_entity) {
char avty_topic[mqtt_topic_max_size];
strcpy(avty_topic, mqtt_topic);
strcat(avty_topic, gateway_name);
strcat(avty_topic, availability_topic);
sensor["avty_t"] = avty_topic;
}
if (device_class && device_class[0]) {
// We check if the class belongs to HAAS classes list
int num_classes = sizeof(availableHASSClasses) / sizeof(availableHASSClasses[0]);
for (int i = 0; i < num_classes; i++) { // see class list and size into config_mqttDiscovery.h
if (strcmp(availableHASSClasses[i], device_class) == 0) {
sensor["dev_cla"] = device_class; //device_class
}
}
}
if (unit_of_meas && unit_of_meas[0]) {
// We check if the class belongs to HAAS units list
int num_units = sizeof(availableHASSUnits) / sizeof(availableHASSUnits[0]);
for (int i = 0; i < num_units; i++) { // see units list and size into config_mqttDiscovery.h
if (strcmp(availableHASSUnits[i], unit_of_meas) == 0) {
sensor["unit_of_meas"] = unit_of_meas; //unit_of_measurement*/
}
}
}
sensor["name"] = s_name; //name
sensor["uniq_id"] = unique_id; //unique_id
if (retainCmd)
sensor["retain"] = retainCmd; // Retain command
if (value_template && value_template[0]) {
if (strcmp(sensor_type, "cover") == 0 && strcmp(state_class, "blind") == 0) {
sensor["tilt_status_tpl"] = value_template; // tilt_status_template for blind
} else if (strcmp(sensor_type, "cover") == 0 && strcmp(state_class, "curtain") == 0) {
sensor["pos_tpl"] = value_template; // position_template for curtain
} else {
sensor["val_tpl"] = value_template; //HA Auto discovery
}
}
if (payload_on && payload_on[0]) {
if (strcmp(sensor_type, "button") == 0) {
sensor["pl_prs"] = payload_on; // payload_press for a button press
} else if (strcmp(sensor_type, "number") == 0) {
sensor["cmd_tpl"] = payload_on; // payload_on for a switch
} else if (strcmp(sensor_type, "update") == 0) {
sensor["pl_inst"] = payload_on; // payload_install for update
} else if (strcmp(sensor_type, "cover") == 0 && strcmp(state_class, "blind") == 0) {
int value = std::stoi(payload_on);
sensor["tilt_opnd_val"] = value; // tilt_open_value for blind
} else if (strcmp(sensor_type, "cover") == 0 && strcmp(state_class, "curtain") == 0) {
int value = std::stoi(payload_on);
sensor["pos_open"] = value; // open value for curtain
} else {
if (strcmp(payload_on, "True") == 0 || strcmp(payload_on, "true") == 0) {
sensor["pl_on"] = true;
} else {
sensor["pl_on"] = payload_on; // payload_on for the rest
}
}
}
if (payload_off && payload_off[0]) {
if (strcmp(sensor_type, "cover") == 0 && strcmp(state_class, "blind") == 0) {
sensor["pl_cls"] = payload_off; // payload_close for cover
} else if (strcmp(sensor_type, "cover") == 0 && strcmp(state_class, "curtain") == 0) {
int value = std::stoi(payload_off);
sensor["pos_clsd"] = value; // closed value for curtain
} else {
if (strcmp(payload_off, "False") == 0 || strcmp(payload_off, "false") == 0) {
sensor["pl_off"] = false;
} else {
sensor["pl_off"] = payload_off; //payload_off for the rest
}
}
}
if (command_template && command_template[0]) {
if (strcmp(sensor_type, "cover") == 0 && strcmp(state_class, "blind") == 0) {
sensor["tilt_cmd_tpl"] = command_template; //command_template
} else if (strcmp(sensor_type, "cover") == 0 && strcmp(state_class, "curtain") == 0) {
sensor["set_pos_tpl"] = command_template; //command_template
} else {
sensor["cmd_tpl"] = command_template; //command_template
}
}
if (strcmp(sensor_type, "device_tracker") == 0)
sensor["src_type"] = "bluetooth_le"; // source_type - payload_install for update
if (off_delay != 0)
sensor["off_dly"] = off_delay; // off_delay
if (payload_available[0])
sensor["pl_avail"] = payload_available; // payload_on
if (payload_not_available[0])
sensor["pl_not_avail"] = payload_not_available; //payload_off
if (state_class && state_class[0])
sensor["stat_cla"] = state_class; //add the state class on the sensors ( https://developers.home-assistant.io/docs/core/entity/sensor/#available-state-classes )
if (state_on != nullptr)
if (strcmp(state_on, "true") == 0) {
sensor["stat_on"] = true;
} else {
sensor["stat_on"] = state_on;
}
if (state_off != nullptr)
if (strcmp(state_off, "false") == 0) {
sensor["stat_off"] = false;
} else {
sensor["stat_off"] = state_off;
}
if (cmd_topic[0]) {
char command_topic[mqtt_topic_max_size];
strcpy(command_topic, mqtt_topic);
strcat(command_topic, gateway_name);
strcat(command_topic, cmd_topic);
if (strcmp(sensor_type, "cover") == 0 && strcmp(state_class, "blind") == 0) {
sensor["tilt_cmd_t"] = command_topic; // tilt_command_topic for cover
} else if (strcmp(sensor_type, "cover") == 0 && strcmp(state_class, "curtain") == 0) {
sensor["set_pos_t"] = command_topic; // position_command_topic for curtain
} else {
sensor["cmd_t"] = command_topic; //command_topic
}
}
if (enum_options != nullptr) {
sensor["ops"] = enum_options; // options
}
StaticJsonDocument jsonDeviceBuffer;
JsonObject device = jsonDeviceBuffer.to();
JsonArray identifiers = device.createNestedArray("ids");
if (gateway_entity) {
//device representing the board
device["name"] = String(gateway_name);
# ifndef GATEWAY_MODEL
String model = "";
serializeJson(modules, model);
device["mdl"] = model;
# else
device["mdl"] = GATEWAY_MODEL;
# endif
device["mf"] = GATEWAY_MANUFACTURER;
if (ethConnected) {
# ifdef ESP32_ETHERNET
device["cu"] = String("http://") + String(ETH.localIP().toString()) + String("/"); //configuration_url
# endif
} else {
device["cu"] = String("http://") + String(WiFi.localIP().toString()) + String("/"); //configuration_url
}
device["sw"] = OMG_VERSION;
identifiers.add(String(getMacAddress()));
} else {
//The Connections
if (device_id[0]) {
JsonArray connections = device.createNestedArray("cns");
JsonArray connection_mac = connections.createNestedArray();
connection_mac.add("mac");
connection_mac.add(device_id);
//Device representing the actual sensor/switch device
//The Device ID
identifiers.add(device_id);
}
if (device_manufacturer[0]) {
device["mf"] = device_manufacturer;
}
if (device_model[0]) {
device["mdl"] = device_model;
}
// generate unique device name by adding the second half of the device_id only if device_name and device_id are different and we don't want to use the BLE name
if (device_name[0]) {
if (strcmp(device_id, device_name) != 0 && device_id[0] && !ForceDeviceName) {
device["name"] = device_name + String("-") + String(device_id + 6);
} else {
device["name"] = device_name;
}
}
device["via_device"] = String(getMacAddress()); //mac address of the gateway so that the devices link to the gateway
}
sensor["dev"] = device; // device
String topic = String(discovery_prefix) + "/" + String(sensor_type) + "/" + String(unique_id) + "/config";
Log.trace(F("Announce Device %s on %s" CR), String(sensor_type).c_str(), topic.c_str());
sensor["topic"] = topic;
sensor["retain"] = true;
enqueueJsonObject(sensor);
}
void eraseTopic(const char* sensor_type, const char* unique_id) {
if (sensor_type == NULL || unique_id == NULL) {
return;
}
String topic = String(discovery_prefix) + "/" + String(sensor_type) + "/" + String(unique_id) + "/config";
Log.trace(F("Erase entity discovery %s on %s" CR), String(sensor_type).c_str(), topic.c_str());
pubMQTT((char*)topic.c_str(), "", true);
}
# if defined(ZgatewayBT) || defined(SecondaryModule)
void btPresenceParametersDiscovery() {
createDiscovery("number", //set Type
subjectBTtoMQTT, "BT: Presence/Tracker timeout", (char*)getUniqueId("presenceawaytimer", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "{{ value_json.presenceawaytimer/60000 }}", //set availability_topic,device_class,value_template,
"{\"presenceawaytimer\":{{value*60000}},\"save\":true}", "", "min", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoBTset, //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain,
stateClassNone //State Class
);
}
void btScanParametersDiscovery() {
createDiscovery("number", //set Type
subjectBTtoMQTT, "BT: Interval between scans", (char*)getUniqueId("interval", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "{{ value_json.interval/1000 }}", //set availability_topic,device_class,value_template,
"{\"interval\":{{value*1000}},\"save\":true}", "", "s", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoBTset, //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain,
stateClassNone //State Class
);
createDiscovery("number", //set Type
subjectBTtoMQTT, "BT: Interval between active scans", (char*)getUniqueId("intervalacts", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "{{ value_json.intervalacts/1000 }}", //set availability_topic,device_class,value_template,
"{\"intervalacts\":{{value*1000}},\"save\":true}", "", "s", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoBTset, //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain,
stateClassNone //State Class
);
}
# endif
void pubMqttDiscovery() {
Log.trace(F("omgStatusDiscovery" CR));
# ifdef SecondaryModule
String uptimeName = "SYS: Uptime " + String(SecondaryModule);
String uptimeId = "uptime-" + String(SecondaryModule);
createDiscovery("sensor", //set Type
subjectSYStoMQTTSecondaryModule, uptimeName.c_str(), (char*)getUniqueId(uptimeId, "").c_str(), //set state_topic,name,uniqueId
will_Topic, "duration", "{{ value_json.uptime }}", //set availability_topic,device_class,value_template,
"", "", "s", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, "", //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassMeasurement //State Class
);
String freememName = "SYS: Free memory " + String(SecondaryModule);
String freememId = "freemem-" + String(SecondaryModule);
createDiscovery("sensor", //set Type
subjectSYStoMQTTSecondaryModule, freememName.c_str(), (char*)getUniqueId(freememId, "").c_str(), //set state_topic,name,uniqueId
will_Topic, "data_size", "{{ value_json.freemem }}", //set availability_topic,device_class,value_template,
"", "", "B", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, "", //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassMeasurement //State Class
);
String restartName = "SYS: Restart " + String(SecondaryModule);
String restartId = "restart-" + String(SecondaryModule);
createDiscovery("button", //set Type
will_Topic, restartName.c_str(), (char*)getUniqueId(restartId, "").c_str(), //set state_topic,name,uniqueId
will_Topic, "restart", "", //set availability_topic,device_class,value_template,
"{\"cmd\":\"restart\"}", "", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoSYSsetSecondaryModule, //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
# endif
createDiscovery("binary_sensor", //set Type
will_Topic, "SYS: Connectivity", (char*)getUniqueId("connectivity", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "connectivity", "", //set availability_topic,device_class,value_template,
Gateway_AnnouncementMsg, will_Message, "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, "", //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
createDiscovery("sensor", //set Type
subjectSYStoMQTT, "SYS: Uptime", (char*)getUniqueId("uptime", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "duration", "{{ value_json.uptime }}", //set availability_topic,device_class,value_template,
"", "", "s", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, "", //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassMeasurement //State Class
);
createDiscovery("sensor", //set Type
subjectSYStoMQTT, "SYS: Free memory", (char*)getUniqueId("freemem", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "data_size", "{{ value_json.freemem }}", //set availability_topic,device_class,value_template,
"", "", "B", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, "", //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassMeasurement //State Class
);
createDiscovery("sensor", //set Type
subjectSYStoMQTT, "SYS: IP", (char*)getUniqueId("ip", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "{{ value_json.ip }}", //set availability_topic,device_class,value_template,
"", "", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, "", //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
createDiscovery("switch", //set Type
subjectSYStoMQTT, "SYS: Auto discovery", (char*)getUniqueId("disc", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "{{ value_json.disc }}", //set availability_topic,device_class,value_template,
"{\"disc\":true,\"save\":true}", "{\"disc\":false,\"save\":true}", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoSYSset, //set,payload_avalaible,payload_not avalaible ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device MAC, retain,
stateClassNone, //State Class
"false", "true" //state_off, state_on
);
# ifdef LED_ADDRESSABLE
createDiscovery("number", //set Type
subjectSYStoMQTT, "SYS: LED Brightness", (char*)getUniqueId("rgbb", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "{{ (value_json.rgbb/2.55) | round(0) }}", //set availability_topic,device_class,value_template,
"{\"rgbb\":{{ (value*2.55) | round(0) }},\"save\":true}", "", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoSYSset, //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain,
stateClassNone //State Class
);
# endif
# ifdef ZdisplaySSD1306
# include "config_SSD1306.h"
createDiscovery("switch", //set Type
subjectSSD1306toMQTT, "SSD1306: Control", (char*)getUniqueId("onstate", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "{{ value_json.onstate }}", //set availability_topic,device_class,value_template,
"{\"onstate\":true,\"save\":true}", "{\"onstate\":false,\"save\":true}", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoSSD1306set, //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device MAC, retain
stateClassNone, //State Class
"false", "true" //state_off, state_on
);
createDiscovery("switch", //set Type
subjectWebUItoMQTT, "SSD1306: Display metric", (char*)getUniqueId("displayMetric", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "{{ value_json.displayMetric }}", //set availability_topic,device_class,value_template,
"{\"displayMetric\":true,\"save\":true}", "{\"displayMetric\":false,\"save\":true}", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoWebUIset, //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device MAC, retain
stateClassNone, //State Class
"false", "true" //state_off, state_on
);
createDiscovery("number", //set Type
subjectSSD1306toMQTT, "SSD1306: Brightness", (char*)getUniqueId("brightness", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "{{ value_json.brightness }}", //set availability_topic,device_class,value_template,
"{\"brightness\":{{value}},\"save\":true}", "", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoSSD1306set, //set,payload_available,payload_not available,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
# endif
# ifndef ESP32_ETHERNET
createDiscovery("sensor", //set Type
subjectSYStoMQTT, "SYS: RSSI", (char*)getUniqueId("rssi", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "signal_strength", "{{ value_json.rssi }}", //set availability_topic,device_class,value_template,
"", "", "dB", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, "", //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
# endif
# if defined(ESP32) && !defined(NO_INT_TEMP_READING)
createDiscovery("sensor", //set Type
subjectSYStoMQTT, "SYS: Internal temperature", (char*)getUniqueId("tempc", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "temperature", "{{ value_json.tempc | round(1)}}", //set availability_topic,device_class,value_template,
"", "", "°C", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, "", //set,payload_avalaible,payload_not avalaible ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device MAC
stateClassMeasurement //State Class
);
# if defined(ZboardM5STICKC) || defined(ZboardM5STICKCP) || defined(ZboardM5TOUGH)
createDiscovery("sensor", //set Type
subjectSYStoMQTT, "SYS: Bat voltage", (char*)getUniqueId("m5batvoltage", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "voltage", "{{ value_json.m5batvoltage }}", //set availability_topic,device_class,value_template,
"", "", "V", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, "", //set,payload_available,payload_not available ,is a child device, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
createDiscovery("sensor", //set Type
subjectSYStoMQTT, "SYS: Bat current", (char*)getUniqueId("m5batcurrent", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "current", "{{ value_json.m5batcurrent }}", //set availability_topic,device_class,value_template,
"", "", "A", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, "", //set,payload_available,payload_not available ,is a child device, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
createDiscovery("sensor", //set Type
subjectSYStoMQTT, "SYS: Vin voltage", (char*)getUniqueId("m5vinvoltage", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "voltage", "{{ value_json.m5vinvoltage }}", //set availability_topic,device_class,value_template,
"", "", "V", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, "", //set,payload_available,payload_not available ,is a child device, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
createDiscovery("sensor", //set Type
subjectSYStoMQTT, "SYS: Vin current", (char*)getUniqueId("m5vincurrent", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "current", "{{ value_json.m5vincurrent }}", //set availability_topic,device_class,value_template,
"", "", "A", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, "", //set,payload_available,payload_not available ,is a child device, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
# endif
# ifdef ZboardM5STACK
createDiscovery("sensor", //set Type
subjectSYStoMQTT, "SYS: Batt level", (char*)getUniqueId("m5battlevel", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "battery", "{{ value_json.m5battlevel }}", //set availability_topic,device_class,value_template,
"", "", "%", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, "", //set,payload_available,payload_not available ,is a child device, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
createDiscovery("binary_sensor", //set Type
subjectSYStoMQTT, "SYS: Is Charging", (char*)getUniqueId("m5ischarging", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "{{ value_json.m5ischarging }}", "", //set availability_topic,device_class,value_template,
"", "", "%", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, "", //set,payload_available,payload_not available ,is a child device, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
createDiscovery("binary_sensor", //set Type
subjectSYStoMQTT, "SYS: Is Charge Full", (char*)getUniqueId("m5ischargefull", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "{{ value_json.m5ischargefull }}", "", //set availability_topic,device_class,value_template,
"", "", "%", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, "", //set,payload_available,payload_not available ,is a child device, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
# endif
# endif
createDiscovery("button", //set Type
will_Topic, "SYS: Restart gateway", (char*)getUniqueId("restart", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "restart", "", //set availability_topic,device_class,value_template,
"{\"cmd\":\"restart\"}", "", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoSYSset, //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
createDiscovery("button", //set Type
will_Topic, "SYS: Erase credentials", (char*)getUniqueId("erase", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "", //set availability_topic,device_class,value_template,
"{\"cmd\":\"erase\"}", "", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoSYSset, //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
# ifdef MQTT_HTTPS_FW_UPDATE
createDiscovery("update", //set Type
subjectRLStoMQTT, "SYS: Firmware Update", (char*)getUniqueId("update", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "firmware", "", //set availability_topic,device_class,value_template,
LATEST_OR_DEV, "", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoSYSupdate, //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
# endif
# ifdef ZsensorBME280
# include "config_BME280.h"
# define BMEparametersCount 5
Log.trace(F("bme280Discovery" CR));
char* BMEsensor[BMEparametersCount][8] = {
{"sensor", "temp", "bme", "temperature", jsonTempc, "", "", "°C"},
{"sensor", "pa", "bme", "pressure", jsonPa, "", "", "hPa"},
{"sensor", "hum", "bme", "humidity", jsonHum, "", "", "%"},
{"sensor", "altim", "bme", "", jsonAltim, "", "", "m"},
{"sensor", "altift", "bme", "", jsonAltif, "", "", "ft"}
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
};
for (int i = 0; i < BMEparametersCount; i++) {
createDiscovery(BMEsensor[i][0],
BMETOPIC, BMEsensor[i][1], (char*)getUniqueId(BMEsensor[i][1], BMEsensor[i][2]).c_str(),
will_Topic, BMEsensor[i][3], BMEsensor[i][4],
BMEsensor[i][5], BMEsensor[i][6], BMEsensor[i][7],
0, Gateway_AnnouncementMsg, will_Message, true, "",
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
}
# endif
# ifdef ZsensorHTU21
# include "config_HTU21.h"
# define HTUparametersCount 2
Log.trace(F("htu21Discovery" CR));
char* HTUsensor[HTUparametersCount][8] = {
{"sensor", "temp", "htu", "temperature", jsonTempc, "", "", "°C"},
{"sensor", "hum", "htu", "humidity", jsonHum, "", "", "%"}
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
};
for (int i = 0; i < HTUparametersCount; i++) {
//trc(HTUsensor[i][1]);
createDiscovery(HTUsensor[i][0],
HTUTOPIC, HTUsensor[i][1], (char*)getUniqueId(HTUsensor[i][1], HTUsensor[i][2]).c_str(),
will_Topic, HTUsensor[i][3], HTUsensor[i][4],
HTUsensor[i][5], HTUsensor[i][6], HTUsensor[i][7],
0, Gateway_AnnouncementMsg, will_Message, true, "",
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassMeasurement //State Class
);
}
# endif
# ifdef ZsensorLM75
Log.trace(F("LM75Discovery" CR));
char* LM75sensor[8] = {"sensor", "temp", "htu", "temperature", jsonTempc, "", "", "°C"};
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
createDiscovery(LM75sensor[0],
LM75TOPIC, LM75sensor[1], (char*)getUniqueId(LM75sensor[1], LM75sensor[2]).c_str(),
will_Topic, LM75sensor[3], LM75sensor[4],
LM75sensor[5], LM75sensor[6], LM75sensor[7],
0, Gateway_AnnouncementMsg, will_Message, true, "",
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassMeasurement //State Class
);
# endif
# ifdef ZsensorAHTx0
# include "config_AHTx0.h"
# define AHTparametersCount 2
Log.trace(F("AHTx0Discovery" CR));
char* AHTsensor[AHTparametersCount][8] = {
{"sensor", "temp", "aht", "temperature", jsonTempc, "", "", "°C"},
{"sensor", "hum", "aht", "humidity", jsonHum, "", "", "%"}
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
};
for (int i = 0; i < AHTparametersCount; i++) {
createDiscovery(AHTsensor[i][0],
AHTTOPIC, AHTsensor[i][1], (char*)getUniqueId(AHTsensor[i][1], AHTsensor[i][2]).c_str(),
will_Topic, AHTsensor[i][3], AHTsensor[i][4],
AHTsensor[i][5], AHTsensor[i][6], AHTsensor[i][7],
0, Gateway_AnnouncementMsg, will_Message, true, "",
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassMeasurement //State Class
);
}
# endif
# ifdef ZsensorDHT
# include "config_DHT.h"
# define DHTparametersCount 2
Log.trace(F("DHTDiscovery" CR));
char* DHTsensor[DHTparametersCount][8] = {
{"sensor", "temp", "dht", "temperature", jsonTempc, "", "", "°C"},
{"sensor", "hum", "dht", "humidity", jsonHum, "", "", "%"}
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
};
for (int i = 0; i < DHTparametersCount; i++) {
//trc(DHTsensor[i][1]);
createDiscovery(DHTsensor[i][0],
DHTTOPIC, DHTsensor[i][1], (char*)getUniqueId(DHTsensor[i][1], DHTsensor[i][2]).c_str(),
will_Topic, DHTsensor[i][3], DHTsensor[i][4],
DHTsensor[i][5], DHTsensor[i][6], DHTsensor[i][7],
0, Gateway_AnnouncementMsg, will_Message, true, "",
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassMeasurement //State Class
);
}
# endif
# ifdef ZsensorADC
# include "config_ADC.h"
Log.trace(F("ADCDiscovery" CR));
char* ADCsensor[8] = {"sensor", "adc", "", "", jsonAdc, "", "", ""};
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
//trc(ADCsensor[1]);
createDiscovery(ADCsensor[0],
ADCTOPIC, ADCsensor[1], (char*)getUniqueId(ADCsensor[1], ADCsensor[2]).c_str(),
will_Topic, ADCsensor[3], ADCsensor[4],
ADCsensor[5], ADCsensor[6], ADCsensor[7],
0, Gateway_AnnouncementMsg, will_Message, true, "",
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
# endif
# ifdef ZsensorBH1750
# include "config_BH1750.h"
# define BH1750parametersCount 3
Log.trace(F("BH1750Discovery" CR));
char* BH1750sensor[BH1750parametersCount][8] = {
{"sensor", "lux", "BH1750", "illuminance", jsonLux, "", "", "lx"},
{"sensor", "ftCd", "BH1750", "irradiance", jsonFtcd, "", "", ""},
{"sensor", "wattsm2", "BH1750", "irradiance", jsonWm2, "", "", "wm²"}
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
};
for (int i = 0; i < BH1750parametersCount; i++) {
//trc(BH1750sensor[i][1]);
createDiscovery(BH1750sensor[i][0],
subjectBH1750toMQTT, BH1750sensor[i][1], (char*)getUniqueId(BH1750sensor[i][1], BH1750sensor[i][2]).c_str(),
will_Topic, BH1750sensor[i][3], BH1750sensor[i][4],
BH1750sensor[i][5], BH1750sensor[i][6], BH1750sensor[i][7],
0, Gateway_AnnouncementMsg, will_Message, true, "",
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassMeasurement //State Class
);
}
# endif
# ifdef ZsensorMQ2
# include "config_MQ2.h"
# define MQ2parametersCount 2
Log.trace(F("MQ2Discovery" CR));
char* MQ2sensor[MQ2parametersCount][8] = {
{"sensor", "gas", "MQ2", "gas", jsonVal, "", "", "ppm"},
{"binary_sensor", "MQ2", "", "gas", jsonPresence, "true", "false", ""}
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
};
for (int i = 0; i < MQ2parametersCount; i++) {
createDiscovery(MQ2sensor[i][0],
subjectMQ2toMQTT, MQ2sensor[i][1], (char*)getUniqueId(MQ2sensor[i][1], MQ2sensor[i][2]).c_str(),
will_Topic, MQ2sensor[i][3], MQ2sensor[i][4],
MQ2sensor[i][5], MQ2sensor[i][6], MQ2sensor[i][7],
0, Gateway_AnnouncementMsg, will_Message, true, "",
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
}
# endif
# ifdef ZsensorTEMT6000
# include "config_TEMT6000.h"
# define TEMT6000parametersCount 3
Log.trace(F("TEMT6000Discovery" CR));
char* TEMT6000sensor[TEMT6000parametersCount][8] = {
{"sensor", "lux", "TEMT6000", "illuminance", jsonLux, "", "", "lx"},
{"sensor", "ftcd", "TEMT6000", "irradiance", jsonFtcd, "", "", ""},
{"sensor", "wattsm2", "TEMT6000", "irradiance", jsonWm2, "", "", "wm²"}
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
};
for (int i = 0; i < TEMT6000parametersCount; i++) {
//trc(TEMT6000sensor[i][1]);
createDiscovery(TEMT6000sensor[i][0],
subjectTEMT6000toMQTT, TEMT6000sensor[i][1], (char*)getUniqueId(TEMT6000sensor[i][1], TEMT6000sensor[i][2]).c_str(),
will_Topic, TEMT6000sensor[i][3], TEMT6000sensor[i][4],
TEMT6000sensor[i][5], TEMT6000sensor[i][6], TEMT6000sensor[i][7],
0, Gateway_AnnouncementMsg, will_Message, true, "",
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassMeasurement //State Class
);
}
# endif
# ifdef ZsensorTSL2561
# include "config_TSL2561.h"
# define TSL2561parametersCount 3
Log.trace(F("TSL2561Discovery" CR));
char* TSL2561sensor[TSL2561parametersCount][8] = {
{"sensor", "lux", "TSL2561", "illuminance", jsonLux, "", "", "lx"},
{"sensor", "ftcd", "TSL2561", "irradiance", jsonFtcd, "", "", ""},
{"sensor", "wattsm2", "TSL2561", "irradiance", jsonWm2, "", "", "wm²"}
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
};
for (int i = 0; i < TSL2561parametersCount; i++) {
//trc(TSL2561sensor[i][1]);
createDiscovery(TSL2561sensor[i][0],
subjectTSL12561toMQTT, TSL2561sensor[i][1], (char*)getUniqueId(TSL2561sensor[i][1], TSL2561sensor[i][2]).c_str(),
will_Topic, TSL2561sensor[i][3], TSL2561sensor[i][4],
TSL2561sensor[i][5], TSL2561sensor[i][6], TSL2561sensor[i][7],
0, Gateway_AnnouncementMsg, will_Message, true, "",
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassMeasurement //State Class
);
}
# endif
# ifdef ZsensorHCSR501
# include "config_HCSR501.h"
Log.trace(F("HCSR501Discovery" CR));
char* HCSR501sensor[8] = {"binary_sensor", "hcsr501", "", "motion", jsonPresence, "true", "false", ""};
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
//trc(HCSR501sensor[1]);
createDiscovery(HCSR501sensor[0],
subjectHCSR501toMQTT, HCSR501sensor[1], (char*)getUniqueId(HCSR501sensor[1], HCSR501sensor[2]).c_str(),
will_Topic, HCSR501sensor[3], HCSR501sensor[4],
HCSR501sensor[5], HCSR501sensor[6], HCSR501sensor[7],
0, Gateway_AnnouncementMsg, will_Message, true, "",
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
# endif
# ifdef ZsensorGPIOInput
# include "config_GPIOInput.h"
Log.trace(F("GPIOInputDiscovery" CR));
char* GPIOInputsensor[8] = {"binary_sensor", "GPIOInput", "", "", jsonGpio, INPUT_GPIO_ON_VALUE, INPUT_GPIO_OFF_VALUE, ""};
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
//trc(GPIOInputsensor[1]);
createDiscovery(GPIOInputsensor[0],
subjectGPIOInputtoMQTT, GPIOInputsensor[1], (char*)getUniqueId(GPIOInputsensor[1], GPIOInputsensor[2]).c_str(),
will_Topic, GPIOInputsensor[3], GPIOInputsensor[4],
GPIOInputsensor[5], GPIOInputsensor[6], GPIOInputsensor[7],
0, Gateway_AnnouncementMsg, will_Message, true, "",
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
# endif
# ifdef ZsensorINA226
# include "config_INA226.h"
# define INA226parametersCount 3
Log.trace(F("INA226Discovery" CR));
char* INA226sensor[INA226parametersCount][8] = {
{"sensor", "volt", "INA226", "voltage", jsonVolt, "", "", "V"},
{"sensor", "current", "INA226", "current", jsonCurrent, "", "", "A"},
{"sensor", "power", "INA226", "power", jsonPower, "", "", "W"}
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
};
for (int i = 0; i < INA226parametersCount; i++) {
//trc(INA226sensor[i][1]);
createDiscovery(INA226sensor[i][0],
subjectINA226toMQTT, INA226sensor[i][1], (char*)getUniqueId(INA226sensor[i][1], INA226sensor[i][2]).c_str(),
will_Topic, INA226sensor[i][3], INA226sensor[i][4],
INA226sensor[i][5], INA226sensor[i][6], INA226sensor[i][7],
0, Gateway_AnnouncementMsg, will_Message, true, "",
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassMeasurement //State Class
);
}
# endif
# ifdef ZsensorDS1820
extern void pubOneWire_HADiscovery();
// Publish any DS1820 sensors found on the OneWire bus
pubOneWire_HADiscovery();
# endif
# ifdef ZactuatorONOFF
# include "config_ONOFF.h"
Log.trace(F("actuatorONOFFDiscovery" CR));
char* actuatorONOFF[8] = {"switch", "actuatorONOFF", "", "", "{{ value_json.cmd }}", "{\"cmd\":1}", "{\"cmd\":0}", ""};
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
//trc(actuatorONOFF[1]);
createDiscovery(actuatorONOFF[0],
subjectGTWONOFFtoMQTT, actuatorONOFF[1], (char*)getUniqueId(actuatorONOFF[1], actuatorONOFF[2]).c_str(),
will_Topic, actuatorONOFF[3], actuatorONOFF[4],
actuatorONOFF[5], actuatorONOFF[6], actuatorONOFF[7],
0, Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoONOFF,
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone, //State Class
"0", "1" //state_off, state_on
);
# endif
# ifdef ZsensorRN8209
# include "config_RN8209.h"
# define RN8209parametersCount 4
Log.trace(F("RN8209Discovery" CR));
char* RN8209sensor[RN8209parametersCount][8] = {
{"sensor", "volt", "RN8209", "voltage", jsonVolt, "", "", "V"},
{"sensor", "current", "RN8209", "current", jsonCurrent, "", "", "A"},
{"sensor", "power", "RN8209", "power", jsonPower, "", "", "W"},
{"binary_sensor", "inUse", "RN8209", "power", jsonInuseRN8209, "on", "off", ""}
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
};
for (int i = 0; i < RN8209parametersCount; i++) {
String name = "NRG: " + String(RN8209sensor[i][1]);
createDiscovery(RN8209sensor[i][0],
subjectRN8209toMQTT, (char*)name.c_str(), (char*)getUniqueId(RN8209sensor[i][1], RN8209sensor[i][2]).c_str(), //set state_topic,name,uniqueId
will_Topic, RN8209sensor[i][3], RN8209sensor[i][4], //set availability_topic,device_class,value_template,
RN8209sensor[i][5], RN8209sensor[i][6], RN8209sensor[i][7], //set,payload_on,payload_off,unit_of_meas
0, Gateway_AnnouncementMsg, will_Message, true, "", //set off_delay,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassMeasurement //State Class
);
}
# endif
// in addition to the MQTT Device Discovery
# if defined(ZgatewayRF) && defined(RF_on_HAS_as_MQTTSensor)
// Sensor to display RF received value
Log.trace(F("gatewayRFDiscovery" CR));
char* gatewayRF[8] = {"sensor", "gatewayRF", "", "", jsonVal, "", "", ""};
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
//trc(gatewayRF[1]);
createDiscovery(gatewayRF[0],
# if valueAsATopic
subjectRFtoMQTTvalueAsATopic,
# else
subjectRFtoMQTT,
# endif
gatewayRF[1], (char*)getUniqueId(gatewayRF[1], gatewayRF[2]).c_str(),
will_Topic, gatewayRF[3], gatewayRF[4],
gatewayRF[5], gatewayRF[6], gatewayRF[7],
0, Gateway_AnnouncementMsg, will_Message, true, "",
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
# endif
# ifdef ZgatewayRF2
# include "config_RF.h"
// Sensor to display RF received value
Log.trace(F("gatewayRF2Discovery" CR));
char* gatewayRF2[8] = {"sensor", "gatewayRF2", "", "", jsonAddress, "", "", ""};
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
//trc(gatewayRF2[1]);
createDiscovery(gatewayRF2[0],
# if valueAsATopic
subjectRF2toMQTTvalueAsATopic,
# else
subjectRF2toMQTT,
# endif
gatewayRF2[1], (char*)getUniqueId(gatewayRF2[1], gatewayRF2[2]).c_str(),
will_Topic, gatewayRF2[3], gatewayRF2[4],
gatewayRF2[5], gatewayRF2[6], gatewayRF2[7],
0, Gateway_AnnouncementMsg, will_Message, true, "",
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
# endif
# ifdef ZgatewayRFM69
# include "config_RFM69.h"
// Sensor to display RF received value
Log.trace(F("gatewayRFM69Discovery" CR));
char* gatewayRFM69[8] = {"sensor", "gatewayRFM69", "", "", jsonVal, "", "", ""};
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
//trc(gatewayRFM69[1]);
createDiscovery(gatewayRFM69[0],
subjectRFM69toMQTT, gatewayRFM69[1], (char*)getUniqueId(gatewayRFM69[1], gatewayRFM69[2]).c_str(),
will_Topic, gatewayRFM69[3], gatewayRFM69[4],
gatewayRFM69[5], gatewayRFM69[6], gatewayRFM69[7],
0, Gateway_AnnouncementMsg, will_Message, true, "",
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
# endif
# ifdef ZgatewayLORA
# include "config_LORA.h"
// Sensor to display RF received value
Log.trace(F("gatewayLORADiscovery" CR));
char* gatewayLORA[8] = {"sensor", "gatewayLORA", "", "", jsonMsg, "", "", ""};
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
//trc(gatewayLORA[1]);
createDiscovery(gatewayLORA[0],
subjectLORAtoMQTT, gatewayLORA[1], (char*)getUniqueId(gatewayLORA[1], gatewayLORA[2]).c_str(),
will_Topic, gatewayLORA[3], gatewayLORA[4],
gatewayLORA[5], gatewayLORA[6], gatewayLORA[7],
0, Gateway_AnnouncementMsg, will_Message, true, "",
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
createDiscovery("switch", //set Type
subjectLORAtoMQTT, "LORA: CRC", (char*)getUniqueId("enablecrc", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "{{ value_json.enablecrc }}", //set availability_topic,device_class,value_template,
"{\"enablecrc\":true,\"save\":true}", "{\"enablecrc\":false,\"save\":true}", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoLORAset, //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device MAC, retain
stateClassNone, //State Class
"false", "true" //state_off, state_on
);
createDiscovery("switch", //set Type
subjectLORAtoMQTT, "LORA: Invert IQ", (char*)getUniqueId("invertiq", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "{{ value_json.invertiq }}", //set availability_topic,device_class,value_template,
"{\"invertiq\":true,\"save\":true}", "{\"invertiq\":false,\"save\":true}", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoLORAset, //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device MAC, retain
stateClassNone, //State Class
"false", "true" //state_off, state_on
);
createDiscovery("switch", //set Type
subjectLORAtoMQTT, "LORA: Only Known", (char*)getUniqueId("onlyknown", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "{{ value_json.onlyknown }}", //set availability_topic,device_class,value_template,
"{\"onlyknown\":true,\"save\":true}", "{\"onlyknown\":false,\"save\":true}", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoLORAset, //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device MAC, retain
stateClassNone, //State Class
"false", "true" //state_off, state_on
);
# endif
# ifdef ZgatewaySRFB
# include "config_SRFB.h"
// Sensor to display RF received value
Log.trace(F("gatewaySRFBDiscovery" CR));
char* gatewaySRFB[8] = {"sensor", "gatewaySRFB", "", "", jsonVal, "", "", ""};
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
//trc(gatewaySRFB[1]);
createDiscovery(gatewaySRFB[0],
subjectSRFBtoMQTT, gatewaySRFB[1], (char*)getUniqueId(gatewaySRFB[1], gatewaySRFB[2]).c_str(),
will_Topic, gatewaySRFB[3], gatewaySRFB[4],
gatewaySRFB[5], gatewaySRFB[6], gatewaySRFB[7],
0, Gateway_AnnouncementMsg, will_Message, true, "",
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
# endif
# ifdef ZgatewayPilight
# include "config_RF.h"
// Sensor to display RF received value
Log.trace(F("gatewayPilightDiscovery" CR));
char* gatewayPilight[8] = {"sensor", "gatewayPilight", "", "", jsonMsg, "", "", ""};
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
//trc(gatewayPilight[1]);
createDiscovery(gatewayPilight[0],
# if valueAsATopic
subjectPilighttoMQTTvalueAsATopic,
# else
subjectPilighttoMQTT,
# endif
gatewayPilight[1], (char*)getUniqueId(gatewayPilight[1], gatewayPilight[2]).c_str(),
will_Topic, gatewayPilight[3], gatewayPilight[4],
gatewayPilight[5], gatewayPilight[6], gatewayPilight[7],
0, Gateway_AnnouncementMsg, will_Message, true, "",
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
# endif
# ifdef ZgatewayIR
# include "config_IR.h"
// Sensor to display IR received value
Log.trace(F("gatewayIRDiscovery" CR));
char* gatewayIR[8] = {"sensor", "gatewayIR", "", "", jsonVal, "", "", ""};
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
//trc(gatewayIR[1]);
createDiscovery(gatewayIR[0],
subjectIRtoMQTT, gatewayIR[1], (char*)getUniqueId(gatewayIR[1], gatewayIR[2]).c_str(),
will_Topic, gatewayIR[3], gatewayIR[4],
gatewayIR[5], gatewayIR[6], gatewayIR[7],
0, Gateway_AnnouncementMsg, will_Message, true, "",
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
# endif
# ifdef Zgateway2G
# include "config_2G.h"
// Sensor to display 2G received value
Log.trace(F("gateway2GDiscovery" CR));
char* gateway2G[8] = {"sensor", "gateway2G", "", "", jsonMsg, "", "", ""};
//component type,name,availability topic,device class,value template,payload on, payload off, unit of measurement
//trc(gateway2G[1]);
createDiscovery(gateway2G[0],
subject2GtoMQTT, gateway2G[1], (char*)getUniqueId(gateway2G[1], gateway2G[2]).c_str(),
will_Topic, gateway2G[3], gateway2G[4],
gateway2G[5], gateway2G[6], gateway2G[7],
0, Gateway_AnnouncementMsg, will_Message, true, "",
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
# endif
# if defined(ZgatewayBT) || defined(SecondaryModule)
# ifdef ESP32
createDiscovery("number", //set Type
subjectBTtoMQTT, "BT: Connect interval", (char*)getUniqueId("intervalcnct", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "{{ value_json.intervalcnct/60000 }}", //set availability_topic,device_class,value_template,
"{\"intervalcnct\":{{value*60000}},\"save\":true}", "", "min", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoBTset, //set,payload_available,payload_not available,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
createDiscovery("number", //set Type
subjectBTtoMQTT, "BT: Scan duration", (char*)getUniqueId("scanduration", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "{{ value_json.scanduration/1000 }}", //set availability_topic,device_class,value_template,
"{\"scanduration\":{{value*1000}},\"save\":true}", "", "s", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoBTset, //set,payload_available,payload_not available,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
createDiscovery("button", //set Type
will_Topic, "BT: Force scan", (char*)getUniqueId("force_scan", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "", //set availability_topic,device_class,value_template,
"{\"interval\":0}", "", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoBTset, //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device ID, retain
stateClassNone //State Class
);
createDiscovery("button", //set Type
will_Topic, "BT: Erase config", (char*)getUniqueId("erase_bt_config", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "", //set availability_topic,device_class,value_template,
"{\"erase\":true}", "", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoBTset, //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device MAC, retain
stateClassNone //State Class
);
createDiscovery("switch", //set Type
subjectBTtoMQTT, "BT: Publish only sensors", (char*)getUniqueId("only_sensors", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "{{ value_json.onlysensors }}", //set availability_topic,device_class,value_template,
"{\"onlysensors\":true,\"save\":true}", "{\"onlysensors\":false,\"save\":true}", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoBTset, //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device MAC, retain
stateClassNone, //State Class
"false", "true" //state_off, state_on
);
createDiscovery("switch", //set Type
subjectBTtoMQTT, "BT: Adaptive scan", (char*)getUniqueId("adaptive_scan", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "{{ value_json.adaptivescan }}", //set availability_topic,device_class,value_template,
"{\"adaptivescan\":true,\"save\":true}", "{\"adaptivescan\":false,\"save\":true}", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoBTset, //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device MAC, retain
stateClassNone, //State Class
"false", "true" //state_off, state_on
);
createDiscovery("switch", //set Type
subjectBTtoMQTT, "BT: Enabled", (char*)getUniqueId("enabled", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "{{ value_json.enabled }}", //set availability_topic,device_class,value_template,
"{\"enabled\":true,\"save\":true}", "{\"enabled\":false,\"save\":true}", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoBTset, //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device MAC, retain
stateClassNone, //State Class
"false", "true" //state_off, state_on
);
# define EntitiesCount 9
const char* obsoleteEntities[EntitiesCount][2] = {
// Remove previously created entities for version < 1.4.0
{"switch", "active_scan"}, // Replaced by adaptive scan
// Remove previously created entities for version < 1.3.0
{"number", "scanbcnct"}, // Now a connect interval
// Remove previously created entities for version < 1.2.0
{"switch", "restart"}, // Now a button
{"switch", "erase"}, // Now a button
{"switch", "force_scan"}, // Now a button
{"sensor", "interval"}, // Now a number
{"sensor", "scanbcnct"}, // Now a number
{"switch", "ohdiscovery"}, // Now a new key
{"switch", "discovery"}}; // Now a new key
for (int i = 0; i < EntitiesCount; i++) {
eraseTopic(obsoleteEntities[i][0], (char*)getUniqueId(obsoleteEntities[i][1], "").c_str());
}
btScanParametersDiscovery();
btPresenceParametersDiscovery();
createDiscovery("switch", //set Type
subjectBTtoMQTT, "BT: Publish HASS presence", (char*)getUniqueId("hasspresence", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "{{ value_json.hasspresence }}", //set availability_topic,device_class,value_template,
"{\"hasspresence\":true,\"save\":true}", "{\"hasspresence\":false,\"save\":true}", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoBTset, //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device MAC, retain
stateClassNone, //State Class
"false", "true" //state_off, state_on
);
createDiscovery("switch", //set Type
subjectBTtoMQTT, "BT: Publish Advertisement data", (char*)getUniqueId("pubadvdata", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "{{ value_json.pubadvdata }}", //set availability_topic,device_class,value_template,
"{\"pubadvdata\":true,\"save\":true}", "{\"pubadvdata\":false,\"save\":true}", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoBTset, //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device MAC, retain
stateClassNone, //State Class
"false", "true" //state_off, state_on
);
createDiscovery("switch", //set Type
subjectBTtoMQTT, "BT: Connect to devices", (char*)getUniqueId("bleconnect", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "{{ value_json.bleconnect }}", //set availability_topic,device_class,value_template,
"{\"bleconnect\":true,\"save\":true}", "{\"bleconnect\":false,\"save\":true}", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoBTset, //set,payload_available,payload_not available ,is a gateway entity, command topic
"", "", "", "", false, // device name, device manufacturer, device model, device MAC, retain
stateClassNone, //State Class
"false", "true" //state_off, state_on
);
# if DEFAULT_LOW_POWER_MODE != DEACTIVATED
createDiscovery("switch", //set Type
subjectSYStoMQTT, "SYS: Low Power Mode command", (char*)getUniqueId("powermode", "").c_str(), //set state_topic,name,uniqueId
will_Topic, "", "{{ value_json.powermode | bool }}", //set availability_topic,device_class,value_template,
"{\"powermode\":1,\"save\":true}", "{\"powermode\":0,\"save\":true}", "", //set,payload_on,payload_off,unit_of_meas,
0, //set off_delay
Gateway_AnnouncementMsg, will_Message, true, subjectMQTTtoSYSset, //set,payload_available,payload_not available,is a gateway entity, command topic
"", "", "", "", true, // device name, device manufacturer, device model, device MAC, retain
stateClassNone, //State Class
"false", "true" //state_off, state_on
);
# else
// Remove previously created switch for version < 1.4.0
eraseTopic("switch", (char*)getUniqueId("powermode", "").c_str());
# endif
# endif
# endif
}
#else
void pubMqttDiscovery() {}
#endif