Custom Config.

Bumps [follow-redirects](https://github.com/follow-redirects/follow-redirects) from 1.15.4 to 1.15.6.
- [Release notes](https://github.com/follow-redirects/follow-redirects/releases)
- [Commits](https://github.com/follow-redirects/follow-redirects/compare/v1.15.4...v1.15.6)

---
updated-dependencies:
- dependency-name: follow-redirects
  dependency-type: indirect
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

.github/workflows/build.yml

@@ -81,6 +81,7 @@ jobs:
           - "esp32c3-m5stamp"
           - "thingpulse-espgateway"
           - "theengs-bridge"
+          - "esp32dev-ble-idf"
     runs-on: ubuntu-latest
     name: Build with PlatformIO
     steps:
@@ -93,6 +94,7 @@ jobs:
         run: |
           python -m pip install --upgrade pip
           pip install platformio
+          pip install setuptools
       - name: Extract ESP32 platform version from platformio.ini
         run: |
           ESP32_VERSION=$(grep 'esp32_platform\s*=' platformio.ini | cut -d'@' -f2 | tr -d '[:space:]')

.gitignore

@@ -7,3 +7,7 @@ node_modules
 main/certs/private*
 lib/*
 !lib/esp32-bt-lib
+CMakeLists.txt
+dependencies.lock
+sdkconfig.*
+!sdkconfig.defaults

docs/use/actuators.md

@@ -141,8 +141,8 @@ The frequency key is optional, if not set the gateway will use the default frequ
 
 Send PROG command with remote 0:
 
-`mosquitto_pub -t home/OpenMQTTGateway_Somfy/commands/MQTTtoSomfy -m '{"remote":0,"command":"Prog","frequency":433.92}'`
+`mosquitto_pub -t home/OpenMQTTGateway_Somfy/commands/MQTTtoSomfy -m '{"remote":0,"command":"Prog","frequency":433.42}'`
 
 Send Up command with remote 1:
 
-`mosquitto_pub -t home/OpenMQTTGateway_Somfy/commands/MQTTtoSomfy -m '{"remote":1,"command":"Up","frequency":433.92}'`
+`mosquitto_pub -t home/OpenMQTTGateway_Somfy/commands/MQTTtoSomfy -m '{"remote":1,"command":"Up","frequency":433.42}'`

environments.ini

@@ -776,7 +776,7 @@ build_flags =
   '-DRF_MODULE_GDO0=12'        ; CC1101 pin GDO0
   '-DRF_MODULE_GDO2=27'        ; CC1101 pin GDO2
 ; *** RadioLib Options ***
-;  '-DRADIOLIB_DEBUG=true'
+;  '-DRADIOLIB_DEBUG=true'<
 ;  '-DRADIOLIB_VERBOSE=true'
 custom_description = Gateway using RTL_433_ESP library, need CC1101
 
@@ -799,12 +799,12 @@ build_flags =
   '-DZgatewayRTL_433="rtl_433"'
   '-DZradioSX127x="SX127x"'
 ; *** ssd1306 Display Options ***
-  '-DZdisplaySSD1306="HELTEC_SSD1306"'
+;  '-DZdisplaySSD1306="HELTEC_SSD1306"'
 ;  '-DLOG_TO_OLED=false'         ; Enable log to OLED
 ;  '-DJSON_TO_OLED=true'
 ;  '-DLOG_LEVEL_OLED=LOG_LEVEL_NOTICE'
-;  '-DDISPLAY_IDLE_LOGO=false'
-;  '-DDISPLAY_BRIGHTNESS=80'
+;  '-DDISPLAY_IDLE_LOGO=true'
+;  '-DDISPLAY_BRIGHTNESS=20'
 ;  '-DDISPLAY_METRIC=false'
 custom_description = Gateway using RTL_433_ESP and RadioLib
 custom_hardware = ESP32 HELTEC LORA32 V2
@@ -1810,3 +1810,22 @@ build_flags =
 ;  '-DsimplePublishing=true'
 custom_description = BLE Gateway using ethernet or wifi with external antenna
 custom_hardware = ThingPulse gateway single ESP32
+
+[env:esp32dev-ble-idf]
+platform = ${com.esp32_platform}
+framework = arduino, espidf
+board = esp32dev
+extra_scripts = ${com-esp32.extra_scripts}
+board_build.partitions = partitions/min_spiffs.csv
+lib_deps =
+  ${com-esp32.lib_deps}
+  ${libraries.ble}
+  ${libraries.decoder}
+build_flags =
+  ${com-esp32.build_flags}
+  '-DZgatewayBT="BT"'
+  '-DLED_SEND_RECEIVE=2'
+  '-DLED_SEND_RECEIVE_ON=0'
+  '-DGateway_Name="OMG_ESP32_BLE"'
+  '-DUSE_BLUFI=1'
+custom_description = Regular BLE gateway with adaptive scanning activated, automatically adapts the scan parameters depending on your devices

main/User_config.h

@@ -674,7 +674,7 @@ Adafruit_NeoPixel leds2(ANEOPIX_IND_NUM_LEDS, ANEOPIX_IND_DATA_GPIO2, ANEOPIX_IN
 #endif
 
 #if defined(ESP32)
-#  define JSON_MSG_BUFFER    768
+#  define JSON_MSG_BUFFER    816 // adjusted to minimum size covering largest Theengs device JSON properties (RuuviTag_RAWv2)
 #  define SIGNAL_SIZE_UL_ULL uint64_t
 #  define STRTO_UL_ULL       strtoull
 #elif defined(ESP8266)

main/Zblufi.ino

@@ -0,0 +1,265 @@
+/*
+  OpenMQTTGateway  - ESP8266 or Arduino program for home automation
+
+   Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal  and a MQTT broker
+   Send and receiving command by MQTT
+
+  This program enables to:
+ - receive MQTT data from a topic and send signal (RF, IR, BLE, GSM)  corresponding to the received MQTT data
+ - publish MQTT data to a different topic related to received signals (RF, IR, BLE, GSM)
+
+  Copyright: (c)Florian ROBERT
+
+    This file is part of OpenMQTTGateway.
+
+    OpenMQTTGateway is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    OpenMQTTGateway is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#if defined(ESP32) && defined(USE_BLUFI)
+
+#  include "esp_blufi_api.h"
+
+extern "C" {
+#  include "esp_blufi.h"
+}
+
+/* store the station info for send back to phone */
+//static bool gl_sta_connected = false;
+bool omg_blufi_ble_connected = false;
+static uint8_t gl_sta_bssid[6];
+static uint8_t gl_sta_ssid[32];
+static uint8_t gl_sta_passwd[64];
+static int gl_sta_ssid_len;
+static bool gl_sta_is_connecting = false;
+static esp_blufi_extra_info_t gl_sta_conn_info;
+
+static void example_event_callback(esp_blufi_cb_event_t event, esp_blufi_cb_param_t* param);
+void wifi_event_handler(arduino_event_id_t event);
+esp_err_t blufi_security_init(void);
+void blufi_dh_negotiate_data_handler(uint8_t* data, int len, uint8_t** output_data, int* output_len, bool* need_free);
+int blufi_aes_encrypt(uint8_t iv8, uint8_t* crypt_data, int crypt_len);
+int blufi_aes_decrypt(uint8_t iv8, uint8_t* crypt_data, int crypt_len);
+uint16_t blufi_crc_checksum(uint8_t iv8, uint8_t* data, int len);
+void blufi_security_deinit(void);
+
+static void example_event_callback(esp_blufi_cb_event_t event, esp_blufi_cb_param_t* param) {
+  /* actually, should post to blufi_task handle the procedure,
+     * now, as a example, we do it more simply */
+  switch (event) {
+    case ESP_BLUFI_EVENT_INIT_FINISH:
+      Log.notice(F("BLUFI init finish" CR));
+      esp_blufi_adv_start();
+      break;
+    case ESP_BLUFI_EVENT_DEINIT_FINISH:
+      Log.notice(F("BLUFI deinit finish" CR));
+      NimBLEDevice::deinit(true);
+      break;
+    case ESP_BLUFI_EVENT_BLE_CONNECT:
+      omg_blufi_ble_connected = true;
+      esp_blufi_adv_stop();
+      blufi_security_init();
+      break;
+    case ESP_BLUFI_EVENT_BLE_DISCONNECT:
+      omg_blufi_ble_connected = false;
+      blufi_security_deinit();
+      if (WiFi.isConnected()) {
+        esp_blufi_deinit();
+      } else {
+        esp_blufi_adv_start();
+      }
+      break;
+    case ESP_BLUFI_EVENT_REQ_CONNECT_TO_AP:
+      Log.notice(F("BLUFI requset wifi connect to AP" CR));
+      WiFi.begin((char*)gl_sta_ssid, (char*)gl_sta_passwd);
+      gl_sta_is_connecting = true;
+      break;
+    case ESP_BLUFI_EVENT_REQ_DISCONNECT_FROM_AP:
+      Log.notice(F("BLUFI requset wifi disconnect from AP\n" CR));
+      WiFi.disconnect();
+      break;
+    case ESP_BLUFI_EVENT_REPORT_ERROR:
+      Log.notice(F("BLUFI report error, error code %d\n" CR), param->report_error.state);
+      esp_blufi_send_error_info(param->report_error.state);
+      break;
+    case ESP_BLUFI_EVENT_GET_WIFI_STATUS: {
+      esp_blufi_extra_info_t info;
+      if (WiFi.isConnected()) {
+        memset(&info, 0, sizeof(esp_blufi_extra_info_t));
+        memcpy(info.sta_bssid, gl_sta_bssid, 6);
+        info.sta_bssid_set = true;
+        info.sta_ssid = gl_sta_ssid;
+        info.sta_ssid_len = gl_sta_ssid_len;
+        esp_blufi_send_wifi_conn_report(WIFI_MODE_STA, ESP_BLUFI_STA_CONN_SUCCESS, 0, &info);
+      } else if (gl_sta_is_connecting) {
+        esp_blufi_send_wifi_conn_report(WIFI_MODE_STA, ESP_BLUFI_STA_CONNECTING, 0, &gl_sta_conn_info);
+      } else {
+        esp_blufi_send_wifi_conn_report(WIFI_MODE_STA, ESP_BLUFI_STA_CONN_FAIL, 0, &gl_sta_conn_info);
+      }
+
+      break;
+    }
+    case ESP_BLUFI_EVENT_RECV_SLAVE_DISCONNECT_BLE:
+      esp_blufi_disconnect();
+      break;
+    case ESP_BLUFI_EVENT_RECV_STA_SSID:
+      strncpy((char*)gl_sta_ssid, (char*)param->sta_ssid.ssid, param->sta_ssid.ssid_len);
+      gl_sta_ssid[param->sta_ssid.ssid_len] = '\0';
+      Log.notice(F("Recv STA SSID %s" CR), gl_sta_ssid);
+      break;
+    case ESP_BLUFI_EVENT_RECV_STA_PASSWD:
+      strncpy((char*)gl_sta_passwd, (char*)param->sta_passwd.passwd, param->sta_passwd.passwd_len);
+      gl_sta_passwd[param->sta_passwd.passwd_len] = '\0';
+      Log.notice(F("Recv STA PASSWORD %s" CR), gl_sta_passwd);
+      break;
+    case ESP_BLUFI_EVENT_GET_WIFI_LIST: {
+      WiFi.scanNetworks(true);
+      break;
+    }
+    case ESP_BLUFI_EVENT_RECV_CUSTOM_DATA: {
+      Log.notice(F("Recv Custom Data %" PRIu32 CR), param->custom_data.data_len);
+      esp_log_buffer_hex("Custom Data", param->custom_data.data, param->custom_data.data_len);
+
+      DynamicJsonDocument json(1024);
+      auto error = deserializeJson(json, param->custom_data.data);
+      if (error) {
+        Log.error(F("deserialize config failed: %s, buffer capacity: %u" CR), error.c_str(), json.capacity());
+        break;
+      }
+      if (!json.isNull()) {
+        Log.trace(F("\nparsed json, size: %u" CR), json.memoryUsage());
+        if (json.containsKey("mqtt_server"))
+          strcpy(mqtt_server, json["mqtt_server"]);
+        if (json.containsKey("mqtt_port"))
+          strcpy(mqtt_port, json["mqtt_port"]);
+        if (json.containsKey("mqtt_user"))
+          strcpy(mqtt_user, json["mqtt_user"]);
+        if (json.containsKey("mqtt_pass"))
+          strcpy(mqtt_pass, json["mqtt_pass"]);
+        if (json.containsKey("mqtt_topic"))
+          strcpy(mqtt_topic, json["mqtt_topic"]);
+        if (json.containsKey("mqtt_broker_secure"))
+          mqtt_secure = json["mqtt_broker_secure"].as<bool>();
+        if (json.containsKey("gateway_name"))
+          strcpy(gateway_name, json["gateway_name"]);
+        saveConfig();
+      }
+      break;
+    }
+    case ESP_BLUFI_EVENT_RECV_USERNAME:
+      break;
+    case ESP_BLUFI_EVENT_RECV_CA_CERT:
+      break;
+    case ESP_BLUFI_EVENT_RECV_CLIENT_CERT:
+      break;
+    case ESP_BLUFI_EVENT_RECV_SERVER_CERT:
+      break;
+    case ESP_BLUFI_EVENT_RECV_CLIENT_PRIV_KEY:
+      break;
+      ;
+    case ESP_BLUFI_EVENT_RECV_SERVER_PRIV_KEY:
+      break;
+    default:
+      break;
+  }
+}
+
+void wifi_event_handler(arduino_event_id_t event) {
+  switch (event) {
+    case ARDUINO_EVENT_WIFI_STA_GOT_IP6:
+    case ARDUINO_EVENT_WIFI_STA_GOT_IP: {
+      gl_sta_is_connecting = false;
+      esp_blufi_extra_info_t info;
+      memset(&info, 0, sizeof(esp_blufi_extra_info_t));
+      memcpy(info.sta_bssid, gl_sta_bssid, 6);
+      info.sta_bssid_set = true;
+      info.sta_ssid = gl_sta_ssid;
+      info.sta_ssid_len = gl_sta_ssid_len;
+      if (omg_blufi_ble_connected == true) {
+        esp_blufi_send_wifi_conn_report(WIFI_MODE_STA, ESP_BLUFI_STA_CONN_SUCCESS, 0, &info);
+      }
+
+      break;
+    }
+    case ARDUINO_EVENT_WIFI_SCAN_DONE: {
+      uint16_t apCount = WiFi.scanComplete();
+      if (apCount == 0) {
+        Log.notice(F("No AP found" CR));
+        break;
+      }
+      wifi_ap_record_t* ap_list = (wifi_ap_record_t*)malloc(sizeof(wifi_ap_record_t) * apCount);
+      if (!ap_list) {
+        Log.error(F("malloc error, ap_list is NULL"));
+        break;
+      }
+      ESP_ERROR_CHECK(esp_wifi_scan_get_ap_records(&apCount, ap_list));
+      esp_blufi_ap_record_t* blufi_ap_list = (esp_blufi_ap_record_t*)malloc(apCount * sizeof(esp_blufi_ap_record_t));
+      if (!blufi_ap_list) {
+        if (ap_list) {
+          free(ap_list);
+        }
+        Log.error(F("malloc error, blufi_ap_list is NULL" CR));
+        break;
+      }
+      for (int i = 0; i < apCount; ++i) {
+        blufi_ap_list[i].rssi = ap_list[i].rssi;
+        memcpy(blufi_ap_list[i].ssid, ap_list[i].ssid, sizeof(ap_list[i].ssid));
+      }
+
+      if (omg_blufi_ble_connected == true) {
+        esp_blufi_send_wifi_list(apCount, blufi_ap_list);
+      }
+
+      free(ap_list);
+      free(blufi_ap_list);
+      break;
+    }
+    default:
+      break;
+  }
+  return;
+}
+
+static esp_blufi_callbacks_t example_callbacks = {
+    .event_cb = example_event_callback,
+    .negotiate_data_handler = blufi_dh_negotiate_data_handler,
+    .encrypt_func = blufi_aes_encrypt,
+    .decrypt_func = blufi_aes_decrypt,
+    .checksum_func = blufi_crc_checksum,
+};
+
+bool startBlufi() {
+  esp_err_t ret = ESP_OK;
+  WiFi.onEvent(wifi_event_handler);
+
+  ret = esp_blufi_register_callbacks(&example_callbacks);
+  if (ret) {
+    Log.error(F("%s blufi register failed, error code = %x" CR), __func__, ret);
+    return false;
+  }
+
+  if (NimBLEDevice::getInitialized()) {
+    NimBLEDevice::deinit(true);
+    delay(50);
+  }
+  esp_blufi_btc_init();
+  uint8_t mac[6];
+  esp_read_mac(mac, ESP_MAC_WIFI_STA);
+  char advName[20] = {0};
+  snprintf(advName, sizeof(advName), "OMGBFI_%02X%02X%02X%02X%02X%02X", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+  NimBLEDevice::init(advName);
+  esp_blufi_gatt_svr_init();
+  ble_gatts_start();
+  return esp_blufi_profile_init() == ESP_OK;
+}
+
+#endif // defined(ESP32) && defined(USE_BLUFI)

main/ZblufiSec.ino

@@ -0,0 +1,197 @@
+/*
+ * SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Unlicense OR CC0-1.0
+ */
+
+#if defined(ESP32) && defined(USE_BLUFI)
+
+#  include "esp_blufi_api.h"
+#  include "esp_crc.h"
+#  include "mbedtls/aes.h"
+#  include "mbedtls/dhm.h"
+#  include "mbedtls/md5.h"
+
+/*
+   The SEC_TYPE_xxx is for self-defined packet data type in the procedure of "BLUFI negotiate key"
+   If user use other negotiation procedure to exchange(or generate) key, should redefine the type by yourself.
+ */
+#  define SEC_TYPE_DH_PARAM_LEN  0x00
+#  define SEC_TYPE_DH_PARAM_DATA 0x01
+#  define SEC_TYPE_DH_P          0x02
+#  define SEC_TYPE_DH_G          0x03
+#  define SEC_TYPE_DH_PUBLIC     0x04
+
+struct blufi_security {
+#  define DH_SELF_PUB_KEY_LEN     128
+#  define DH_SELF_PUB_KEY_BIT_LEN (DH_SELF_PUB_KEY_LEN * 8)
+  uint8_t self_public_key[DH_SELF_PUB_KEY_LEN];
+#  define SHARE_KEY_LEN     128
+#  define SHARE_KEY_BIT_LEN (SHARE_KEY_LEN * 8)
+  uint8_t share_key[SHARE_KEY_LEN];
+  size_t share_len;
+#  define PSK_LEN 16
+  uint8_t psk[PSK_LEN];
+  uint8_t* dh_param;
+  int dh_param_len;
+  uint8_t iv[16];
+  mbedtls_dhm_context dhm;
+  mbedtls_aes_context aes;
+};
+static struct blufi_security* blufi_sec;
+
+static int myrand(void* rng_state, unsigned char* output, size_t len) {
+  esp_fill_random(output, len);
+  return (0);
+}
+
+extern "C" void btc_blufi_report_error(esp_blufi_error_state_t state);
+
+void blufi_dh_negotiate_data_handler(uint8_t* data, int len, uint8_t** output_data, int* output_len, bool* need_free) {
+  int ret;
+  uint8_t type = data[0];
+
+  if (blufi_sec == NULL) {
+    Log.error(F("BLUFI Security is not initialized" CR));
+    btc_blufi_report_error(ESP_BLUFI_INIT_SECURITY_ERROR);
+    return;
+  }
+
+  switch (type) {
+    case SEC_TYPE_DH_PARAM_LEN:
+      blufi_sec->dh_param_len = ((data[1] << 8) | data[2]);
+      if (blufi_sec->dh_param) {
+        free(blufi_sec->dh_param);
+        blufi_sec->dh_param = NULL;
+      }
+      blufi_sec->dh_param = (uint8_t*)malloc(blufi_sec->dh_param_len);
+      if (blufi_sec->dh_param == NULL) {
+        btc_blufi_report_error(ESP_BLUFI_DH_MALLOC_ERROR);
+        Log.error(F("%s, malloc failed\n" CR), __func__);
+        return;
+      }
+      break;
+    case SEC_TYPE_DH_PARAM_DATA: {
+      if (blufi_sec->dh_param == NULL) {
+        Log.error(F("%s, blufi_sec->dh_param == NULL" CR), __func__);
+        btc_blufi_report_error(ESP_BLUFI_DH_PARAM_ERROR);
+        return;
+      }
+      uint8_t* param = blufi_sec->dh_param;
+      memcpy(blufi_sec->dh_param, &data[1], blufi_sec->dh_param_len);
+      ret = mbedtls_dhm_read_params(&blufi_sec->dhm, &param, &param[blufi_sec->dh_param_len]);
+      if (ret) {
+        Log.error(F("%s read param failed %d" CR), __func__, ret);
+        btc_blufi_report_error(ESP_BLUFI_READ_PARAM_ERROR);
+        return;
+      }
+      free(blufi_sec->dh_param);
+      blufi_sec->dh_param = NULL;
+
+      ret = mbedtls_dhm_make_public(&blufi_sec->dhm, (int)mbedtls_mpi_size(&blufi_sec->dhm.P), blufi_sec->self_public_key, blufi_sec->dhm.len, myrand, NULL);
+      if (ret) {
+        Log.error(F("%s make public failed %d" CR), __func__, ret);
+        btc_blufi_report_error(ESP_BLUFI_MAKE_PUBLIC_ERROR);
+        return;
+      }
+
+      ret = mbedtls_dhm_calc_secret(&blufi_sec->dhm,
+                                    blufi_sec->share_key,
+                                    SHARE_KEY_BIT_LEN,
+                                    &blufi_sec->share_len,
+                                    myrand, NULL);
+      if (ret) {
+        Log.error(F("%s mbedtls_dhm_calc_secret failed %d" CR), __func__, ret);
+        btc_blufi_report_error(ESP_BLUFI_DH_PARAM_ERROR);
+        return;
+      }
+
+      mbedtls_md5(blufi_sec->share_key, blufi_sec->share_len, blufi_sec->psk);
+
+      mbedtls_aes_setkey_enc(&blufi_sec->aes, blufi_sec->psk, 128);
+
+      /* alloc output data */
+      *output_data = &blufi_sec->self_public_key[0];
+      *output_len = blufi_sec->dhm.len;
+      *need_free = false;
+
+    } break;
+    case SEC_TYPE_DH_P:
+      break;
+    case SEC_TYPE_DH_G:
+      break;
+    case SEC_TYPE_DH_PUBLIC:
+      break;
+  }
+}
+
+int blufi_aes_encrypt(uint8_t iv8, uint8_t* crypt_data, int crypt_len) {
+  int ret;
+  size_t iv_offset = 0;
+  uint8_t iv0[16];
+
+  memcpy(iv0, blufi_sec->iv, sizeof(blufi_sec->iv));
+  iv0[0] = iv8; /* set iv8 as the iv0[0] */
+
+  ret = mbedtls_aes_crypt_cfb128(&blufi_sec->aes, MBEDTLS_AES_ENCRYPT, crypt_len, &iv_offset, iv0, crypt_data, crypt_data);
+  if (ret) {
+    return -1;
+  }
+
+  return crypt_len;
+}
+
+int blufi_aes_decrypt(uint8_t iv8, uint8_t* crypt_data, int crypt_len) {
+  int ret;
+  size_t iv_offset = 0;
+  uint8_t iv0[16];
+
+  memcpy(iv0, blufi_sec->iv, sizeof(blufi_sec->iv));
+  iv0[0] = iv8; /* set iv8 as the iv0[0] */
+
+  ret = mbedtls_aes_crypt_cfb128(&blufi_sec->aes, MBEDTLS_AES_DECRYPT, crypt_len, &iv_offset, iv0, crypt_data, crypt_data);
+  if (ret) {
+    return -1;
+  }
+
+  return crypt_len;
+}
+
+uint16_t blufi_crc_checksum(uint8_t iv8, uint8_t* data, int len) {
+  /* This iv8 ignore, not used */
+  return esp_crc16_be(0, data, len);
+}
+
+esp_err_t blufi_security_init(void) {
+  blufi_sec = (struct blufi_security*)malloc(sizeof(struct blufi_security));
+  if (blufi_sec == NULL) {
+    return ESP_FAIL;
+  }
+
+  memset(blufi_sec, 0x0, sizeof(struct blufi_security));
+
+  mbedtls_dhm_init(&blufi_sec->dhm);
+  mbedtls_aes_init(&blufi_sec->aes);
+
+  memset(blufi_sec->iv, 0x0, 16);
+  return 0;
+}
+
+void blufi_security_deinit(void) {
+  if (blufi_sec == NULL) {
+    return;
+  }
+  if (blufi_sec->dh_param) {
+    free(blufi_sec->dh_param);
+    blufi_sec->dh_param = NULL;
+  }
+  mbedtls_dhm_free(&blufi_sec->dhm);
+  mbedtls_aes_free(&blufi_sec->aes);
+
+  memset(blufi_sec, 0x0, sizeof(struct blufi_security));
+
+  free(blufi_sec);
+  blufi_sec = NULL;
+}
+
+#endif // defined(ESP32) && defined(USE_BLUFI)

main/ZgatewayBT.ino

@@ -43,7 +43,6 @@ QueueHandle_t BLEQueue;
 #  include <decoder.h>
 #  include <driver/adc.h>
 #  include <esp_bt.h>
-#  include <esp_bt_main.h>
 #  include <esp_wifi.h>
 
 #  include <atomic>
@@ -892,7 +891,11 @@ void setupBTTasksAndBLE() {
   xTaskCreatePinnedToCore(
       procBLETask, /* Function to implement the task */
       "procBLETask", /* Name of the task */
+#  ifdef USE_BLUFI
+      13000,
+#  else
       8500, /* Stack size in bytes */
+#  endif
       NULL, /* Task input parameter */
       2, /* Priority of the task (set higher than core task) */
       &xProcBLETaskHandle, /* Task handle. */
@@ -1020,7 +1023,18 @@ void launchBTDiscovery(bool overrideDiscovery) {
           }
           if (!properties.empty()) {
             StaticJsonDocument<JSON_MSG_BUFFER> jsonBuffer;
-            deserializeJson(jsonBuffer, properties);
+            auto error = deserializeJson(jsonBuffer, properties);
+            if (error) {
+              if (jsonBuffer.overflowed()) {
+                // This should not happen if JSON_MSG_BUFFER is large enough for
+                // the Theengs json properties
+                Log.error(F("JSON deserialization of Theengs properties overflowed (error %s), buffer capacity: %u. Program might crash. Properties json: %s" CR),
+                          error.c_str(), jsonBuffer.capacity(), properties.c_str());
+              } else {
+                Log.error(F("JSON deserialization of Theengs properties errored: %" CR),
+                          error.c_str());
+              }
+            }
             for (JsonPair prop : jsonBuffer["properties"].as<JsonObject>()) {
               Log.trace(F("Key: %s"), prop.key().c_str());
               Log.trace(F("Unit: %s"), prop.value()["unit"].as<const char*>());

main/ZsensorGPIOInput.ino

@@ -76,7 +76,7 @@ void MeasureGPIOInput() {
         }
 #    endif
         Log.notice(F("Erasing ESP Config, restarting" CR));
-        setup_wifimanager(true);
+        setupwifi(true);
       }
     } else {
       resetTime = 0;

main/ZsensorHCSR501.ino

@@ -64,7 +64,7 @@ void MeasureHCSR501() {
 #  ifdef HCSR501_LED_NOTIFY_GPIO
     digitalWrite(HCSR501_LED_NOTIFY_GPIO, pirState == HCSR501_LED_ON);
 #  endif
-    if (HCSR501data.size() > 1) {
+    if (HCSR501data.size() > 0) {
       HCSR501data["origin"] = subjectHCSR501toMQTT;
       handleJsonEnqueue(HCSR501data);
     }

main/main.ino

@@ -1133,14 +1133,14 @@ void setup() {
 #    ifdef ESP32_ETHERNET
     setup_ethernet_esp32();
 #    endif
-    if (!failSafeMode && !ethConnected) setup_wifimanager(false);
+    if (!failSafeMode && !ethConnected) setupwifi(false);
   } else {
 #    ifdef ESP32_ETHERNET
     setup_ethernet_esp32();
 #    endif
     Log.notice(F("No config in flash, launching wifi manager" CR));
     // In failSafeMode we don't want to setup wifi manager as it has already been done before
-    if (!failSafeMode) setup_wifimanager(false);
+    if (!failSafeMode) setupwifi(false);
   }
 
 #  endif
@@ -1362,6 +1362,13 @@ void setup() {
 #if defined(ESP8266) || defined(ESP32)
 // Bypass for ESP not reconnecting automaticaly the second time https://github.com/espressif/arduino-esp32/issues/2501
 bool wifi_reconnect_bypass() {
+#  if defined(ESP32) && defined(USE_BLUFI)
+  extern bool omg_blufi_ble_connected;
+  if (omg_blufi_ble_connected) {
+    Log.notice(F("BLUFI is connected, bypassing wifi reconnect" CR));
+    return true;
+  }
+#  endif
   uint8_t wifi_autoreconnect_cnt = 0;
 #  ifdef ESP32
   while (WiFi.status() != WL_CONNECTED && wifi_autoreconnect_cnt < maxConnectionRetryNetwork) {
@@ -1628,7 +1635,7 @@ void blockingWaitForReset() {
           Log.trace(F("mounted file system" CR));
           if (SPIFFS.exists("/config.json")) {
             Log.notice(F("Erasing ESP Config, restarting" CR));
-            setup_wifimanager(true);
+            setupwifi(true);
           }
         }
         delay(30000);
@@ -1636,7 +1643,7 @@ void blockingWaitForReset() {
           Log.notice(F("Going into failsafe mode without peripherals" CR));
           // Failsafe mode enable to connect to Wifi or change the firmware without the peripherals setup
           failSafeMode = true;
-          setup_wifimanager(false);
+          setupwifi(false);
         }
       }
     }
@@ -1766,13 +1773,20 @@ bool loadConfigFromFlash() {
   return result;
 }
 
-void setup_wifimanager(bool reset_settings) {
+void setupwifi(bool reset_settings) {
   delay(10);
   WiFi.mode(WIFI_STA);
 
   if (reset_settings)
     eraseAndRestart();
 
+#  if defined(ESP32) && defined(USE_BLUFI)
+  if (!wifi_reconnect_bypass()) {
+    startBlufi();
+    return;
+  }
+#  endif
+
 #  ifdef USE_MAC_AS_GATEWAY_NAME
   String s = WiFi.macAddress();
   snprintf(WifiManager_ssid, MAC_NAME_MAX_LEN, "%s_%.2s%.2s", Gateway_Short_Name, s.c_str(), s.c_str() + 3);
@@ -2881,7 +2895,7 @@ void MQTTtoSYS(char* topicOri, JsonObject& SYSdata) { // json object decoding
         ESPRestart(5);
       } else if (strstr(cmd, eraseCmd) != NULL) { //erase and restart
 #  ifndef ESPWifiManualSetup
-        setup_wifimanager(true);
+        setupwifi(true);
 #  endif
       } else if (strstr(cmd, statusCmd) != NULL) { //erase and restart
         stateMeasures();

package-lock.json

@@ -7144,9 +7144,9 @@
       }
     },
     "node_modules/follow-redirects": {
-      "version": "1.15.4",
-      "resolved": "https://registry.npmjs.org/follow-redirects/-/follow-redirects-1.15.4.tgz",
-      "integrity": "sha512-Cr4D/5wlrb0z9dgERpUL3LrmPKVDsETIJhaCMeDfuFYcqa5bldGV6wBsAN6X/vxlXQtFBMrXdXxdL8CbDTGniw==",
+      "version": "1.15.6",
+      "resolved": "https://registry.npmjs.org/follow-redirects/-/follow-redirects-1.15.6.tgz",
+      "integrity": "sha512-wWN62YITEaOpSK584EZXJafH1AGpO8RVgElfkuXbTOrPX4fIfOyEpW/CsiNd8JdYrAoOvafRTOEnvsO++qCqFA==",
       "dev": true,
       "funding": [
         {
@@ -8413,9 +8413,9 @@
       }
     },
     "node_modules/ip": {
-      "version": "1.1.8",
-      "resolved": "https://registry.npmjs.org/ip/-/ip-1.1.8.tgz",
-      "integrity": "sha512-PuExPYUiu6qMBQb4l06ecm6T6ujzhmh+MeJcW9wa89PoAz5pvd4zPgN5WJV104mb6S2T1AwNIAaB70JNrLQWhg==",
+      "version": "1.1.9",
+      "resolved": "https://registry.npmjs.org/ip/-/ip-1.1.9.tgz",
+      "integrity": "sha512-cyRxvOEpNHNtchU3Ln9KC/auJgup87llfQpQ+t5ghoC/UhL16SWzbueiCsdTnWmqAWl7LadfuwhlqmtOaqMHdQ==",
       "dev": true
     },
     "node_modules/ip-regex": {
@@ -21003,9 +21003,9 @@
       }
     },
     "follow-redirects": {
-      "version": "1.15.4",
-      "resolved": "https://registry.npmjs.org/follow-redirects/-/follow-redirects-1.15.4.tgz",
-      "integrity": "sha512-Cr4D/5wlrb0z9dgERpUL3LrmPKVDsETIJhaCMeDfuFYcqa5bldGV6wBsAN6X/vxlXQtFBMrXdXxdL8CbDTGniw==",
+      "version": "1.15.6",
+      "resolved": "https://registry.npmjs.org/follow-redirects/-/follow-redirects-1.15.6.tgz",
+      "integrity": "sha512-wWN62YITEaOpSK584EZXJafH1AGpO8RVgElfkuXbTOrPX4fIfOyEpW/CsiNd8JdYrAoOvafRTOEnvsO++qCqFA==",
       "dev": true
     },
     "for-each": {
@@ -21960,9 +21960,9 @@
       }
     },
     "ip": {
-      "version": "1.1.8",
-      "resolved": "https://registry.npmjs.org/ip/-/ip-1.1.8.tgz",
-      "integrity": "sha512-PuExPYUiu6qMBQb4l06ecm6T6ujzhmh+MeJcW9wa89PoAz5pvd4zPgN5WJV104mb6S2T1AwNIAaB70JNrLQWhg==",
+      "version": "1.1.9",
+      "resolved": "https://registry.npmjs.org/ip/-/ip-1.1.9.tgz",
+      "integrity": "sha512-cyRxvOEpNHNtchU3Ln9KC/auJgup87llfQpQ+t5ghoC/UhL16SWzbueiCsdTnWmqAWl7LadfuwhlqmtOaqMHdQ==",
       "dev": true
     },
     "ip-regex": {

partitions/default.csv

@@ -0,0 +1,7 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x140000,
+app1,     app,  ota_1,   0x150000,0x140000,
+spiffs,   data, spiffs,  0x290000,0x160000,
+coredump, data, coredump,0x3F0000,0x10000,

partitions/default_16MB.csv

@@ -0,0 +1,7 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x640000,
+app1,     app,  ota_1,   0x650000,0x640000,
+spiffs,   data, spiffs,  0xc90000,0x360000,
+coredump, data, coredump,0xFF0000,0x10000,

partitions/default_8MB.csv

@@ -0,0 +1,7 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x330000,
+app1,     app,  ota_1,   0x340000,0x330000,
+spiffs,   data, spiffs,  0x670000,0x180000,
+coredump, data, coredump,0x7F0000,0x10000,

partitions/min_spiffs.csv

@@ -0,0 +1,7 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x1E0000,
+app1,     app,  ota_1,   0x1F0000,0x1E0000,
+spiffs,   data, spiffs,  0x3D0000,0x20000,
+coredump, data, coredump,0x3F0000,0x10000,

platformio.ini

@@ -60,7 +60,7 @@ extra_configs =
 ;default_envs = esp32s3-atomS3U
 ;default_envs = esp32doitv1-aithinker-r01-sx1278
 ;default_envs = esp32dev-rtl_433
-;default_envs = heltec-rtl_433
+default_envs = heltec-rtl_433
 ;default_envs = heltec-rtl_433-fsk
 ;default_envs = heltec-ble
 ;default_envs = lilygo-rtl_433
@@ -103,6 +103,7 @@ extra_configs =
 ;default_envs = lolin_c3_mini
 ;default_envs = thingpulse-espgateway
 ;default_envs = theengs-bridge
+;default_envs = esp32dev-ble-idf
 
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 ;                              ENVIRONMENTS PARAMETERS                                 ;
@@ -220,4 +221,4 @@ lib_deps =
   ${libraries.ethernet}
 build_flags =
   ${env.build_flags}
-  '-DsimpleReceiving=false'
+  '-DsimpleReceiving=false'

scripts/replace_lib.py

@@ -13,9 +13,8 @@ def calculate_md5(filepath):
 
 def main():
     print(f"Pre build BLE library replacement script")
-    home_path = os.environ.get('HOME') or os.environ.get('USERPROFILE')
     source_file = 'lib/esp32-bt-lib/esp32/libbtdm_app.a'
-    destination_file = os.path.join(home_path, '.platformio', 'packages', 'framework-arduinoespressif32', 'tools', 'sdk', 'esp32', 'ld', 'libbtdm_app.a')
+    destination_file = os.path.join(env.GetProjectConfig().get("platformio", "packages_dir"), 'framework-arduinoespressif32', 'tools', 'sdk', 'esp32', 'ld', 'libbtdm_app.a')
 
     try:
         shutil.copyfile(source_file, destination_file)

sdkconfig.defaults

@@ -0,0 +1,218 @@
+CONFIG_FREERTOS_HZ=1000
+CONFIG_COAP_MBEDTLS_PSK=y
+
+#
+# Bluetooth
+#
+CONFIG_BT_ENABLED=y
+
+#
+# Bluetooth controller
+#
+CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
+# CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY is not set
+# CONFIG_BTDM_CTRL_MODE_BTDM is not set
+CONFIG_BTDM_CTRL_BLE_MAX_CONN=3
+CONFIG_BTDM_CTRL_BR_EDR_SCO_DATA_PATH_EFF=0
+CONFIG_BTDM_CTRL_PCM_ROLE_EFF=0
+CONFIG_BTDM_CTRL_PCM_POLAR_EFF=0
+CONFIG_BTDM_CTRL_BLE_MAX_CONN_EFF=3
+CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN_EFF=0
+CONFIG_BTDM_CTRL_BR_EDR_MAX_SYNC_CONN_EFF=0
+CONFIG_BTDM_CTRL_PINNED_TO_CORE_0=y
+# CONFIG_BTDM_CTRL_PINNED_TO_CORE_1 is not set
+CONFIG_BTDM_CTRL_PINNED_TO_CORE=0
+CONFIG_BTDM_CTRL_HCI_MODE_VHCI=y
+# CONFIG_BTDM_CTRL_HCI_MODE_UART_H4 is not set
+
+#
+# MODEM SLEEP Options
+#
+CONFIG_BTDM_CTRL_MODEM_SLEEP=y
+CONFIG_BTDM_CTRL_MODEM_SLEEP_MODE_ORIG=y
+# CONFIG_BTDM_CTRL_MODEM_SLEEP_MODE_EVED is not set
+CONFIG_BTDM_CTRL_LPCLK_SEL_MAIN_XTAL=y
+# end of MODEM SLEEP Options
+
+CONFIG_BTDM_BLE_DEFAULT_SCA_250PPM=y
+CONFIG_BTDM_BLE_SLEEP_CLOCK_ACCURACY_INDEX_EFF=1
+CONFIG_BTDM_BLE_SCAN_DUPL=y
+CONFIG_BTDM_SCAN_DUPL_TYPE_DEVICE=y
+# CONFIG_BTDM_SCAN_DUPL_TYPE_DATA is not set
+# CONFIG_BTDM_SCAN_DUPL_TYPE_DATA_DEVICE is not set
+CONFIG_BTDM_SCAN_DUPL_TYPE=0
+CONFIG_BTDM_SCAN_DUPL_CACHE_SIZE=100
+# CONFIG_BTDM_BLE_MESH_SCAN_DUPL_EN is not set
+CONFIG_BTDM_CTRL_FULL_SCAN_SUPPORTED=y
+CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y
+CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM=100
+CONFIG_BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD=20
+CONFIG_BTDM_RESERVE_DRAM=0xdb5c
+CONFIG_BTDM_CTRL_HLI=y
+# end of Bluetooth controller
+
+# CONFIG_BT_BLUEDROID_ENABLED is not set
+CONFIG_BT_NIMBLE_ENABLED=y
+# CONFIG_BT_CONTROLLER_ONLY is not set
+
+#
+# NimBLE Options
+#
+CONFIG_BT_NIMBLE_MEM_ALLOC_MODE_INTERNAL=y
+# CONFIG_BT_NIMBLE_MEM_ALLOC_MODE_DEFAULT is not set
+# CONFIG_BT_NIMBLE_LOG_LEVEL_NONE is not set
+# CONFIG_BT_NIMBLE_LOG_LEVEL_ERROR is not set
+# CONFIG_BT_NIMBLE_LOG_LEVEL_WARNING is not set
+CONFIG_BT_NIMBLE_LOG_LEVEL_INFO=y
+# CONFIG_BT_NIMBLE_LOG_LEVEL_DEBUG is not set
+CONFIG_BT_NIMBLE_LOG_LEVEL=1
+CONFIG_BT_NIMBLE_MAX_CONNECTIONS=3
+CONFIG_BT_NIMBLE_MAX_BONDS=3
+CONFIG_BT_NIMBLE_MAX_CCCDS=8
+CONFIG_BT_NIMBLE_L2CAP_COC_MAX_NUM=0
+CONFIG_BT_NIMBLE_PINNED_TO_CORE_0=y
+# CONFIG_BT_NIMBLE_PINNED_TO_CORE_1 is not set
+CONFIG_BT_NIMBLE_PINNED_TO_CORE=0
+CONFIG_BT_NIMBLE_TASK_STACK_SIZE=4096
+CONFIG_BT_NIMBLE_ROLE_CENTRAL=y
+CONFIG_BT_NIMBLE_ROLE_PERIPHERAL=y
+CONFIG_BT_NIMBLE_ROLE_BROADCASTER=y
+CONFIG_BT_NIMBLE_ROLE_OBSERVER=y
+CONFIG_BT_NIMBLE_NVS_PERSIST=y
+CONFIG_BT_NIMBLE_SM_LEGACY=y
+CONFIG_BT_NIMBLE_SM_SC=y
+# CONFIG_BT_NIMBLE_DEBUG is not set
+# CONFIG_BT_NIMBLE_SM_SC_DEBUG_KEYS is not set
+CONFIG_BT_NIMBLE_SVC_GAP_DEVICE_NAME="nimble"
+CONFIG_BT_NIMBLE_GAP_DEVICE_NAME_MAX_LEN=31
+CONFIG_BT_NIMBLE_ATT_PREFERRED_MTU=256
+CONFIG_BT_NIMBLE_SVC_GAP_APPEARANCE=0
+CONFIG_BT_NIMBLE_ACL_BUF_COUNT=20
+CONFIG_BT_NIMBLE_ACL_BUF_SIZE=255
+CONFIG_BT_NIMBLE_HCI_EVT_BUF_SIZE=70
+CONFIG_BT_NIMBLE_HCI_EVT_HI_BUF_COUNT=30
+CONFIG_BT_NIMBLE_HCI_EVT_LO_BUF_COUNT=8
+CONFIG_BT_NIMBLE_MSYS1_BLOCK_COUNT=12
+CONFIG_BT_NIMBLE_HS_FLOW_CTRL=y
+CONFIG_BT_NIMBLE_HS_FLOW_CTRL_ITVL=1000
+CONFIG_BT_NIMBLE_HS_FLOW_CTRL_THRESH=2
+CONFIG_BT_NIMBLE_HS_FLOW_CTRL_TX_ON_DISCONNECT=y
+CONFIG_BT_NIMBLE_RPA_TIMEOUT=900
+# CONFIG_BT_NIMBLE_MESH is not set
+CONFIG_BT_NIMBLE_CRYPTO_STACK_MBEDTLS=y
+CONFIG_BT_NIMBLE_HS_STOP_TIMEOUT_MS=2000
+# CONFIG_BT_NIMBLE_ENABLE_CONN_REATTEMPT is not set
+CONFIG_BT_NIMBLE_BLUFI_ENABLE=y
+CONFIG_BT_NIMBLE_USE_ESP_TIMER=y
+# end of NimBLE Options
+# end of Bluetooth
+
+
+#
+# TLS Key Exchange Methods
+#
+CONFIG_MBEDTLS_PSK_MODES=y
+CONFIG_MBEDTLS_KEY_EXCHANGE_PSK=y
+CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_PSK=y
+CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_PSK=y
+CONFIG_MBEDTLS_KEY_EXCHANGE_RSA_PSK=y
+CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y
+CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA=y
+CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y
+CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y
+CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y
+CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y
+CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y
+# end of TLS Key Exchange Methods
+
+#
+# Arduino Configuration
+#
+CONFIG_ARDUINO_VARIANT="esp32"
+CONFIG_ENABLE_ARDUINO_DEPENDS=y
+CONFIG_AUTOSTART_ARDUINO=y
+# CONFIG_ARDUINO_RUN_CORE0 is not set
+CONFIG_ARDUINO_RUN_CORE1=y
+# CONFIG_ARDUINO_RUN_NO_AFFINITY is not set
+CONFIG_ARDUINO_RUNNING_CORE=1
+CONFIG_ARDUINO_LOOP_STACK_SIZE=8192
+# CONFIG_ARDUINO_EVENT_RUN_CORE0 is not set
+CONFIG_ARDUINO_EVENT_RUN_CORE1=y
+# CONFIG_ARDUINO_EVENT_RUN_NO_AFFINITY is not set
+CONFIG_ARDUINO_EVENT_RUNNING_CORE=1
+# CONFIG_ARDUINO_SERIAL_EVENT_RUN_CORE0 is not set
+# CONFIG_ARDUINO_SERIAL_EVENT_RUN_CORE1 is not set
+CONFIG_ARDUINO_SERIAL_EVENT_RUN_NO_AFFINITY=y
+CONFIG_ARDUINO_SERIAL_EVENT_TASK_RUNNING_CORE=-1
+CONFIG_ARDUINO_SERIAL_EVENT_TASK_STACK_SIZE=2048
+CONFIG_ARDUINO_SERIAL_EVENT_TASK_PRIORITY=24
+CONFIG_ARDUINO_UDP_RUN_CORE0=y
+# CONFIG_ARDUINO_UDP_RUN_CORE1 is not set
+# CONFIG_ARDUINO_UDP_RUN_NO_AFFINITY is not set
+CONFIG_ARDUINO_UDP_RUNNING_CORE=0
+CONFIG_ARDUINO_UDP_TASK_PRIORITY=3
+# CONFIG_ARDUINO_ISR_IRAM is not set
+# CONFIG_DISABLE_HAL_LOCKS is not set
+
+#
+# Debug Log Configuration
+#
+# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_NONE is not set
+CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_ERROR=y
+# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_WARN is not set
+# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_INFO is not set
+# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_DEBUG is not set
+# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_VERBOSE is not set
+CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL=1
+# CONFIG_ARDUHAL_LOG_COLORS is not set
+# CONFIG_ARDUHAL_ESP_LOG is not set
+# end of Debug Log Configuration
+
+# CONFIG_ARDUHAL_PARTITION_SCHEME_DEFAULT is not set
+# CONFIG_ARDUHAL_PARTITION_SCHEME_MINIMAL is not set
+# CONFIG_ARDUHAL_PARTITION_SCHEME_NO_OTA is not set
+# CONFIG_ARDUHAL_PARTITION_SCHEME_HUGE_APP is not set
+CONFIG_ARDUHAL_PARTITION_SCHEME_MIN_SPIFFS=y
+CONFIG_ARDUHAL_PARTITION_SCHEME="min_spiffs"
+# CONFIG_AUTOCONNECT_WIFI is not set
+CONFIG_ARDUINO_SELECTIVE_COMPILATION=y
+CONFIG_ARDUINO_SELECTIVE_ArduinoOTA=y
+CONFIG_ARDUINO_SELECTIVE_AsyncUDP=y
+# CONFIG_ARDUINO_SELECTIVE_AzureIoT is not set
+# CONFIG_ARDUINO_SELECTIVE_BLE is not set
+# CONFIG_ARDUINO_SELECTIVE_BluetoothSerial is not set
+CONFIG_ARDUINO_SELECTIVE_DNSServer=y
+CONFIG_ARDUINO_SELECTIVE_EEPROM=y
+CONFIG_ARDUINO_SELECTIVE_ESP32=y
+CONFIG_ARDUINO_SELECTIVE_ESPmDNS=y
+CONFIG_ARDUINO_SELECTIVE_FFat=y
+CONFIG_ARDUINO_SELECTIVE_FS=y
+CONFIG_ARDUINO_SELECTIVE_HTTPClient=y
+CONFIG_ARDUINO_SELECTIVE_LITTLEFS=y
+CONFIG_ARDUINO_SELECTIVE_NetBIOS=y
+CONFIG_ARDUINO_SELECTIVE_Preferences=y
+CONFIG_ARDUINO_SELECTIVE_SD=y
+CONFIG_ARDUINO_SELECTIVE_SD_MMC=y
+# CONFIG_ARDUINO_SELECTIVE_SimpleBLE is not set
+CONFIG_ARDUINO_SELECTIVE_SPI=y
+CONFIG_ARDUINO_SELECTIVE_SPIFFS=y
+CONFIG_ARDUINO_SELECTIVE_Ticker=y
+CONFIG_ARDUINO_SELECTIVE_Update=y
+CONFIG_ARDUINO_SELECTIVE_WebServer=y
+CONFIG_ARDUINO_SELECTIVE_WiFi=y
+CONFIG_ARDUINO_SELECTIVE_WiFiClientSecure=y
+CONFIG_ARDUINO_SELECTIVE_WiFiProv=y
+CONFIG_ARDUINO_SELECTIVE_Wire=y
+# end of Arduino Configuration
+
+# CONFIG_ESP32_WIFI_IRAM_OPT is not set
+# CONFIG_ESP32_WIFI_RX_IRAM_OPT is not set
+
+#
+# SPI configuration
+#
+# CONFIG_SPI_MASTER_IN_IRAM is not set
+# CONFIG_SPI_MASTER_ISR_IN_IRAM is not set
+# CONFIG_SPI_SLAVE_IN_IRAM is not set
+# CONFIG_SPI_SLAVE_ISR_IN_IRAM is not set
+# end of SPI configuration