Before this fix, connections with Index 1 and 2 were supposed valid when not present in the configuration, generating attempts to connect with those indexes.
Also improve the erase config by adding an erase when the config file is not present (ESP is connected to WiFi without the config file). This way the ESP will not reconnect to the WiFi AP.
Co-authored-by: Florian <1technophile@users.noreply.github.com>
Add Serial as a communication layer so as to transmit data to/from serial
Enable discovery of BT sensors through serial
Add serial heartbeat
Change discovery principle for interval and intervalacts, keep them always discovered and deactivate adaptivescan when changed. Instead of removing their discovery when adaptive scan is activated
Increase JSON_MSG_BUFFER_MAX as we are now using const char* and it requires more memory for Arduino Json Deserialization
Co-authored-by: Florian <1technophile@users.noreply.github.com>
Refactor LED handling into a library
Use a task instead of relying on the loop for precise timing
Co-authored-by: Florian <1technophile@users.noreply.github.com>
Add also a msgrcv (messages received) indicators into SYStoMQTT to measure the performances
Co-authored-by: Florian <1technophile@users.noreply.github.com>
* [SERIAL] Add the capability send info to Serial instead of/added MQTT
Add the capability to send json data to Serial as a communication layer, added/instead of MQTT
* Use delay rather than vTaskDelay
---------
Co-authored-by: Florian <1technophile@users.noreply.github.com>
Gaterway states to improve LED management
Make the sleep function accessible outside BT
BREAKING remove sleep for ESP8266
BREAKING lowpowermode API changed to powermode and new mode definition
Co-authored-by: Florian <1technophile@users.noreply.github.com>
ON per default at start, never OFF unless the board loose power or the program does not start
Co-authored-by: Florian <1technophile@users.noreply.github.com>
Enable the management of different connections at runtime with a set of certs for each.
Add parameters to the WiFi Manager onboarding, client certificates, and certificate validation
* Use one single password for Access point, OTA and WebUI access
* Enable to change the password during WM onboarding, with the WebUI, and MQTT command
* Remove the default password during the first configuration to connect to the AP
* When using the last 8 digits of the MAC as the password, it can now be changed
* Remove gateway password sending to client
* [SYS] Configuration portal for Ethernet board
Enable Wifi Manager as a configuration portal for Ethernet boards, also leverage the Wifi Access point as a fallback connectivity method
Add link to the WebUI from HA and reduce key length
* Remove unnecessary environment
Now that one environment cans support wifi and ethernet, merge the 2
* [LORA] Capability to change LORA frequency and Add OLED
Merge of the 2 environments for TTGO V1
* Merge messages keys with upper level json
* Id as a sub topic
* Add display and state measures
* Add frequency configuration through WebUI
* Add parameters
* Add auto discovery
* Add node example for ttgo lora32 v1
* Add environments and fix scope
* Support for sync word as a byte
* Fix TX Power setting
* Add LoRa gateway description
* Add onlyknown filter
* User friendly manual network configuration
* Add manual network config to the docs
* Add manual network config to the test env
Co-authored-by: DigiH <github@digih.net>
Add a macro to enable removal of update checks
Separate certificates from user_config.h
Consider latest version as the default
Do not use a cert if the url is not
Simplify AWS macro scope
* Add Adafruit NeoPixel library #defines
* Currently FastLED causes rapid reboots on ESP32C3 boards when OMG signals.
Onboard RGB LEDs can be adressed more reliably with the NeoPixel library.
Define RGB_INDICATORS=2 to use this addition.
* rebase fix: adapt to "Bump ESP32" changes in development
* Add build environments for the Espressiv ESP32-C3-DevKitC-02 board
* esp32c3-dev-c2-ble and esp32c3-dev-c2-ble-no-serial environments both
use the Adafruit NeoPixel library for the onboard RGB LED as FastLED
causes rapid reboots.
* Only occasional reboots of this board occure when serial output is not
read. The -no-serial version further improves stability.
* Add a build environment for the Espressiv ESP32-C3-DevKitC-02 board
* The esp32c3-dev-c2-ble offers a reasonable compromise between logging
and stability of OMG on this board.
