Removal of openHAB specific MQTT discovery patch "ohdisc", as it is no longer required with openHAB 4.3 and later, and with openHAB before 4.3 MQTT discovery never was fully implemented anyway.
* Correct string handling for type key in NAMING_KEYS
Extend class structure RTL_433device and modify code to create correct state topic in discovery message to support sensors, that send type key as well as sensors, that don't. Actually only TPMS sensors use type=TPMS.
* Try to correct format failure.
* Remove trailing spaces
* [FSK] Add Lilygo Heltec environment with FSK modulation
Enable RTL_433 frequency and active receiver change with WebUI
Add FSK environment for Heltec and Lilygo
Update to rtl_433_ESP 0.3.0
Resolves issue with sx127x chipset and receiving higher frequencies
Includes support for receiving FSK signals, requires compiler directive OOK_MODULATION=false to switch to FSK mode
Adds unit of measure for rtl_433/battery_ok devices RTL_433_ESP Battery Auto Discovery Missing Unit of Measurement #1644
Updates value template for rtl_433/battery_ok in openHab mode
Resolves out of stack space crash lilygo-rtl_433 crash after chacon remote control button pressed #1655
* [DISC] Add runtime configuration for OpenHAB
Add an MQTT configurable system key "ohdiscovery" for OpenHAB auto discovery
* Docs and environments update
Currently, many entities are created with this device, but it seems more like a noise than real devices as they only present an RSSI and battery property. So filtering changes while we search for library optimization.
* [RTL_433 Discovery] Add Govee water sensor Status entity
Add Govee water status sensor auto discovery as a binary_sensor, the entity will detect Water Leak Event and go back to Off state after 60seconds
* Format and comment
This also changes the topic structure when using the macro valueAsATopic=true, it adds as sub-topics the `type, subtype, and channel` when they exist.
The id is the last subtopic to facilitate filtering, as it may change when replacing the batteries.
Co-authored-by: NorthernMan54 <19808920+NorthernMan54@users.noreply.github.com>
* Update to rtl_433_ESP 0.1.5
Includes support for LILYGO® LoRa32 V2.1_1.6.1 433 Mhz
* Fix lint issue
* Fix build and lint issues
* Add lilygo-rtl_433 to build.yml
* Update Arduino core and BLE/WiFiManager libs.
* Add esp32-s3 and esp32-c3 environments.
* Update build script to use matrix.
* Update release build.
* Fix WiFiManager crash
* Use espressif32 version 3.5.0 for standard ESP32.
* Resolves BLE scan_evt timeout issue with latest version (5.2.0).
* ESP32C3 and ESP32S3 Env's use espressif32 version 5.2.0.
* Update LED pins for C3/S3 environments.
The main features of the upgrade to 0.1.3 of rtl_433_ESP are
1 - Change Transceiver Library to RadioLib
2 - Add support for SX127X transceiver module ( I used the 433 Mhz version of this Heltec module for development ).
3 - Added automatic calibration of the RSSI Signal detection Threshold
4 - Removed dependency on loop for start and end of signal detection, and moved to a ESP32 Task
5 - Moved received signal decoding to a ESP32 Task
6 - Identified Blueline PowerCost Monitor decoder as source of significant memory overhead and disabled.
7 - Multi Receiver support has been validated with RF, RF2 and PiLight
* Update to SmartRC-CC1101-Driver-Lib@^2.5.4 and removal of workaround from #847
Tks to @LSatan workaround no longer needed
https://github.com/LSatan/SmartRC-CC1101-Driver-Lib/issues/65
* Default to value as subject for rtl_433 and receiver switching
* Default to not publishing unparsed signals
* Fix for missing String for uint64_t
* Fix is only required when value a subject is defined and not PiLight
Co-authored-by: Northern Man <sgracey@Heisenberg.local>
* PR #934
* Active Receiver Switching
Switching of the active receiver module is available between the RF,
RF2, RTL_433 and Pilight Gateway modules, allowing for changing of
signal decoders without redploying the openMQTTGateway package.
Sending a JSON message to the command topic of the desired receiver
will change the active receiver module.
Other minor adjustments/improvements
1 - Improved startup serial logging that includes
- OpenMQTTGateway Version
- OpenMQTTGateway Modules
2 - Trace logging of full Gateway module command topic
- Enabled in RF, RF2, PiLight and RTL_433
3 - Updated RTL_433 Documentation to only include enabled ASK/OOK
device decoders
4 - Trace logging of MQTT Callback topic
* Regression testing
* Adding valueAsASubject support to rtl_433_ESP
- model and id keys are appended to message topic
* Increased memory size for receiver switching in blocking build all
Co-authored-by: Northern Man <sgracey@Heisenberg.local>
DigiH