* Move minRssi in config_BT.h
Move var definitions next to compilation var definitions
* Introduce UseExtDecoder when is def MQTTDecodeTopic
Replace #ifdef MQTTDecodeTopic by #if UseExtDecoder
* Rename AttemptBLECOnnect to AttemptBLEConnect
* Create a struct (BTConfig_s) for BT configuration data
Create a default config for BTConfig_s (BTConfig_default) based on defines
Create a global variable (BTConfig) to hold live BT configuration data and initialize it
Move bleConnect to BTConfig
* Move BLEscanBeforeConnect in BTConfig
* Move BLEinterval in BTConfig
* Move PublishOnlySensors in BTConfig
* Move hassPresence in BTConfig
* Move minRssi into BTConfig
* Introduce presenceTopic into BTConfig
* Move MQTTDecodeTopic as extDecoderTopic into BTConfig
* Mutate UseExtDecoder as runtime var BTConfig.extDecoderTopic
* Remove ServicedataMinLength (unused)
Always declare AttemptBLEConnect & BLE_FILTER_CONNECTABLE
* Mutate BLE_FILTER_CONNECTABLE as runtime parameter BTConfig.filterConnectable
* Mutate pubKnownBLEServiceData as runtime var in BTConfig
Mutate pubUnknownBLEServiceData as runtime var in BTConfig
Mutate pubBLEManufacturerData as runtime var in BTConfig
Mutate pubUnknownBLEManufacturerData as runtime var in BTConfig
Mutate pubBLEServiceUUID as runtime var in BTConfig
* Mutate useBeaconUuidForTopic as runtime var in BTConfig
Mutate useBeaconUuidForPresence as runtime var in BTConfig
* Small optimization
* Formatting of config_BT
Co-authored-by: Florian <1technophile@users.noreply.github.com>
* Add OpenHAB3 tutorial and BLE binary
* Small text changes
Just a few small text changes, also writing out OMG as OpenMQTTGateway, probably clearer for new to OMG users.
Co-authored-by: DigiH <github@digih.net>
* Bump Theengs Decoder to v0.6.1
* Differentiate a FASTLed environment
* remove BT from the nodemcuv2-all-test env as it is already tested into nodemcuv2-ble
* Decoder 0.6.2
Co-authored-by: DigiH <github@digih.net>
* Publishing/receiving inconsistencies
* General platformio.ini changes
General platformio.ini changes to allow for publishing/receiving settings to be defined in User_cofig.h instead of them only working if defined in the environments. Kept separate so far for discussion.
* Use a task to process immediate BLE actions to prevent MQTT disconnection if the action takes too long to complete.
* Add state_on and state_off parameters to createDiscovery
New IBT-2X version
XMTZX04HM extension
XMTZX05HM extension
Add temperature decoding to JQJCY01M
Fix IBT 6XS
Replace lbs by lb
Add SOLIS 6 Probes BBQ
Add temp to JQJCY01M
Update XMTZC05HM to include XMTZC02HM
Just some minor code cleanup
* Rework OOK Receiver sample and rename directory to OOK_Receiver
* Cleaned up diagnostic logging
* Added logging of device decoder return codes ( DEMOD_DEBUG & RTL_DEBUG=4 )
* Fixed some compiler warnings
* Remove std::string as the model id and use decoder enum.
* Update decoder version
* Check model id is in decoder range when launching discovery.
* Add BLEconnect enum MIN/MAX
Includes the following updates to rtl_433_ESP:
1 - Workaround for cc1101 module going deaf after 24 hours, issue #16.
- By default the workaround is enabled, define NO_DEAF_WORKAROUND to remove the workaround
2 - Improved process for updating from rtl_433 for GitHub, almost totally automated.
- FYI - Their is a shell script in the tools subdirectory which does most of the heavy lifting required
3 - Updated device decoders to latest release of rtl_433
- They are now in align with rtl_433 release 21.12
4 - Updated r_api.c to prioritize ook demodulators - feature from rtl_433
5 - Created contrib directory for other device decoders to be merged into code base as part of the rtl_433 update process
6 - Bump library version to 0.0.3
7 - Tuned signal receiver logic and now throw away the first received byte. On testing this appears to dramatically reduce the number of unparsed signals.
8 - Fixed README feedback from @DigiH and updated the wording for 'PUBLISH_UNPARSED'. Also removed serial logging of unparsed messages unless 'PUBLISH_UNPARSED' is set
9 - Fixed gitignore so that the clone of rtl_433 is no longer part of the repository.
10 - Added new DEFINITION to enable rtl_433 verbose mode for a single device decoder. RTL_VERBOSE=##
* add script to compress firmware before ota upload
* add examples for OTA flashing/updating Sonoff RF Bridge
- use compress script to save space uploading firmware
- use "board_build.ldscript = eagle.flash.1m64.ld" to free some additional space for OTA flashing.
* Support for BME280 Temperature Correction
The Spark Fun BME 280 library has support for Temperature correction, and this pull request implements the ability to apply a correction via a compiler directive ( BME280Correction ).
* Disable MQTTsetMQTT and MQTT_HTTPS_FW_UPDATE to allow OTA for Avatto Bakery IR
Trying to update my Avattos with the currently released 0.9.8 I found that OTA wasn't possible any longer as the build was now to large
0.9.8
Checking size .pio/build/avatto-bakeey-ir/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [==== ] 42.4% (used 34772 bytes from 81920 bytes)
Flash: [====== ] 55.2% (used 528716 bytes from 958448 bytes)
this goes back to 0.9.7, where WiFi, MQTT and firmware update was introduced over MQTT commands
0.9.7
Checking size .pio/build/avatto-bakeey-ir/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [==== ] 42.4% (used 34772 bytes from 81920 bytes)
Flash: [====== ] 55.2% (used 528716 bytes from 958448 bytes)
Going back to building 0.9.6 I was able to OTA update again with the much smaller build
0.9.6
Checking size .pio/build/avatto-bakeey-ir/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [==== ] 39.7% (used 32512 bytes from 81920 bytes)
Flash: [==== ] 41.4% (used 396804 bytes from 958448 bytes)
Building 0.9.8 with the flags brings the build back to OTAable size
0.9.8 with
'-UMQTTsetMQTT'
'-UMQTT_HTTPS_FW_UPDATE'
Checking size .pio/build/avatto-bakeey-ir/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [==== ] 39.9% (used 32684 bytes from 81920 bytes)
Flash: [==== ] 42.3% (used 405024 bytes from 958448 bytes)
Similar to the flag setting in [env:rfbridge]
I'm not even sure if MQTT_HTTPS_FW_UPDATE would even work on the Avatto, with the limited flash memory.
Should we also add
board_build.ldscript = eagle.flash.1m64.ld
as a default, as it's required for OTA updates on the Avattos as discussed in https://github.com/1technophile/OpenMQTTGateway/issues/763#issuecomment-698864712 ?
* Doc addition for restricted MQTT options
Doc addition for https://github.com/1technophile/OpenMQTTGateway/pull/1046 and https://github.com/1technophile/OpenMQTTGateway/pull/986
Florian