reduce gateway name
reduce parameters size
correct issue when using advanced config network
comment simple receiving per default (it is set in platformio.ini when necessary)
* Replace fixed allocation of json buffer
by a dynamic one, and simplify trace function of json objects
* differentiate the change depending on board memory size
to make it works with UNO
Rename set commands to config
correct json buffer size and gateway name
replace state to cmd
replace set by config
add restart and erase command
add unicity to gateway command switches
BLE devices shouldn't be child of the gateway
make the BTtoMQTT topic consistent with other definitions
* cleargrass temperature, humidity and air pressure sensor add
* new method of data retrieving for standard cleargrass (enable more frequent data reading)
* update irremoteesp8266
* add new protocols, simplify API and publish protocol name
-added the following protocols:
#define IR_LEGOPF
#define IR_MITSUBISHI_HEAVY_88
#define IR_MITSUBISHI_HEAVY_152
#define IR_DAIKIN216
#define IR_SHARP_AC
#define IR_GOODWEATHER
#define IR_INAX
#define IR_DAIKIN160
#define IR_NEOCLIMA
#define IR_DAIKIN176
#define IR_DAIKIN128
#define IR_AMCOR
#define IR_DAIKIN152
#define IR_MITSUBISHI136
#define IR_MITSUBISHI112
#define IR_HITACHI_AC424
-changed the send API, now you can use the protocol name directly exemple NEC instead of IR_NEC
-publish the protocol name to MQTT added to the number
-replace long by long long
* missing repeat definitions
and set default repeat value to 0
* move protocol name retrieving outside arduino scope
* put all protocols with capital letters
* modify doc
* add long long activation for arduino json on test_config file
report detected mouvement through a "presence" set to true (will never be false for info) & a darkness attribute:
{"presence":true,"darkness":46}
the ble interval must be set to 0 if you want to scan permanently for movements
-avoid issues with WIFI automatic reconnection on ESP32
-avoid reset of ESP32 when wifi is disconnected
-enable to erase the wifi/mqtt settings if; the mqtt broker wasn't connected once or if the TRIGGER_PIN is pushed for a long time >10s
Relay ok
Button press ok
RF reception 433toMQTT ok
To have the RF reception you need to connect D0 of SYN470 to GPIO4 of ESP8285. Instruction to follow. Do not do that if you are not confortable with soldering and don't have an electrical background.
Florian