This commit avoid transmitting the saved MQTT user password to the web page for security reasons.
Instead we send the init password and check if it has been modified prior saving
* [FSK] Add Lilygo Heltec environment with FSK modulation
Enable RTL_433 frequency and active receiver change with WebUI
Add FSK environment for Heltec and Lilygo
* [SYS] Improve central queue stability
Improve central queue stability and add metrics
* Change partition for esp32dev-pilight-somfy-cc1101
to avoid program size too big error message with esp32dev-pilight-somfy-cc1101
* Only check for gateway updates at the start
to avoid consuming extra memory during operations
Publish the information about the available release with the retain flag
* Use one single password for Access point, OTA and WebUI access
* Enable to change the password during WM onboarding, with the WebUI, and MQTT command
* Remove the default password during the first configuration to connect to the AP
* When using the last 8 digits of the MAC as the password, it can now be changed
* Remove gateway password sending to client
* [SYS] Configuration portal for Ethernet board
Enable Wifi Manager as a configuration portal for Ethernet boards, also leverage the Wifi Access point as a fallback connectivity method
Add link to the WebUI from HA and reduce key length
* Remove unnecessary environment
Now that one environment cans support wifi and ethernet, merge the 2
* [LORA] Capability to change LORA frequency and Add OLED
Merge of the 2 environments for TTGO V1
* Merge messages keys with upper level json
* Id as a sub topic
* Add display and state measures
* Add frequency configuration through WebUI
* Add parameters
* Add auto discovery
* Add node example for ttgo lora32 v1
* Add environments and fix scope
* Support for sync word as a byte
* Fix TX Power setting
* Add LoRa gateway description
* Add onlyknown filter
* User friendly manual network configuration
* Add manual network config to the docs
* Add manual network config to the test env
Co-authored-by: DigiH <github@digih.net>
• renamed command displaymetric to displayMetric for consistency with reported displayMetric
• added WebUI to receivingMQTT to be able to receive commands
Add a macro to enable removal of update checks
Separate certificates from user_config.h
Consider latest version as the default
Do not use a cert if the url is not
Simplify AWS macro scope
* [DISC] Add runtime configuration for OpenHAB
Add an MQTT configurable system key "ohdiscovery" for OpenHAB auto discovery
* Docs and environments update
Add WDT and reduce update as we now have a change based pub mechanism
Base the change detection on current rather than power and simplify it
Round the result to 2 digits after comma
Add docs
Description:
1 - Fix nextDisplayPage/nextWebUIPage sync with SSD1306
2 - Discovery message name is SS1306
3 - Stack size tuning - ARDUINO_LOOP_STACK_SIZE=9600
With this change, in your personal ESP32 platformio environments you need to change ${com-esp.build_flags} to ${com-esp32.build_flags} and ${com-esp.lib_deps} to ${com-esp32.lib_deps}
4 - On information page, fix module display
5 - Set OTA URL to String systemUrl = RELEASE_LINK + latestVersion + "/" + ENV_NAME + "-firmware.bin";
6 - Allow back level espressif32 framework support
Add support for the ESP8266 deep sleep and required change for DS1820 sensor used in my project.
Allow defining DS1820_RESOLUTION and DS1820_INTERVAL_SEC in ENVIRON without editing config file.
Allow DTimeBetweenReadingmq2 Env. MACRO change without editing source config file.
Added some an example ENVIRONMENTS
Add ESP8266_DEEP_SLEEP_IN_US to nodemcuv2-all-test
Florian