publish libraries to avoid users to have to download them one by one

lib/SparkFun_BME280/examples/CSV_Output/CSV_Output.ino

@@ -0,0 +1,116 @@
+/******************************************************************************
+CSV_Output.ino
+BME280 Arduino and Teensy example
+Marshall Taylor @ SparkFun Electronics
+May 20, 2015
+https://github.com/sparkfun/SparkFun_BME280_Arduino_Library
+
+This sketch configures two BME280 to produce comma separated values for use
+in generating spreadsheet graphs.
+in 10 being used for chip select.
+
+Resources:
+Uses Wire.h for I2C operation
+Uses SPI.h for SPI operation
+
+Development environment specifics:
+Arduino IDE 1.6.4
+Teensy loader 1.23
+
+This code is released under the [MIT License](http://opensource.org/licenses/MIT).
+Please review the LICENSE.md file included with this example. If you have any questions 
+or concerns with licensing, please contact techsupport@sparkfun.com.
+Distributed as-is; no warranty is given.
+******************************************************************************/
+
+#include <stdint.h>
+#include "SparkFunBME280.h"
+
+#include "Wire.h"
+#include "SPI.h"
+
+//Global sensor object
+BME280 mySensor;
+
+unsigned int sampleNumber = 0; //For counting number of CSV rows
+
+void setup()
+{
+	//***Driver settings********************************//
+	//commInterface can be I2C_MODE or SPI_MODE
+	//specify chipSelectPin using arduino pin names
+	//specify I2C address.  Can be 0x77(default) or 0x76
+	
+	//For I2C, enable the following and disable the SPI section
+	mySensor.settings.commInterface = I2C_MODE;
+	mySensor.settings.I2CAddress = 0x77;
+	
+	//For SPI enable the following and dissable the I2C section
+	//mySensor.settings.commInterface = SPI_MODE;
+	//mySensor.settings.chipSelectPin = 10;
+
+
+	//***Operation settings*****************************//
+	mySensor.settings.runMode = 3; //  3, Normal mode
+	mySensor.settings.tStandby = 0; //  0, 0.5ms
+	mySensor.settings.filter = 0; //  0, filter off
+	//tempOverSample can be:
+	//  0, skipped
+	//  1 through 5, oversampling *1, *2, *4, *8, *16 respectively
+	mySensor.settings.tempOverSample = 1;
+	//pressOverSample can be:
+	//  0, skipped
+	//  1 through 5, oversampling *1, *2, *4, *8, *16 respectively
+    mySensor.settings.pressOverSample = 1;
+	//humidOverSample can be:
+	//  0, skipped
+	//  1 through 5, oversampling *1, *2, *4, *8, *16 respectively
+	mySensor.settings.humidOverSample = 1;
+	
+	Serial.begin(57600);
+	Serial.print("Program Started\n");
+	Serial.print("Starting BME280... result of .begin(): 0x");
+	delay(10);  //Make sure sensor had enough time to turn on. BME280 requires 2ms to start up.
+	//Calling .begin() causes the settings to be loaded
+	Serial.println(mySensor.begin(), HEX);
+
+	//Build a first-row of column headers
+	Serial.print("\n\n");
+	Serial.print("Sample,");
+	Serial.print("T(deg C),");
+	Serial.print("T(deg F),");
+	Serial.print("P(Pa),");
+	Serial.print("Alt(m),");
+	Serial.print("Alt(ft),");
+	Serial.print("%RH");
+	Serial.println("");
+	
+}
+
+void loop()
+{
+
+	//Print each row in the loop
+	//Start with temperature, as that data is needed for accurate compensation.
+	//Reading the temperature updates the compensators of the other functions
+	//in the background.
+	Serial.print(sampleNumber);
+	Serial.print(",");
+	Serial.print(mySensor.readTempC(), 2);
+	Serial.print(",");
+	Serial.print(mySensor.readTempF(), 3);
+	Serial.print(",");
+	Serial.print(mySensor.readFloatPressure(), 0);
+	Serial.print(",");
+	Serial.print(mySensor.readFloatAltitudeMeters(), 3);
+	Serial.print(",");
+	Serial.print(mySensor.readFloatAltitudeFeet(), 3);
+	Serial.print(",");
+	Serial.print(mySensor.readFloatHumidity(), 0);
+	Serial.println();
+	
+	sampleNumber++;
+	
+	delay(50);
+
+}