publish libraries to avoid users to have to download them one by one

lib/NewRemoteSwitch/examples/LightShow/LightShow.ino

@@ -0,0 +1,55 @@
+/**
+ * Demo for RF remote switch receiver.
+ * For details, see NewRemoteReceiver.h!
+ *
+ * Connect the transmitter to digital pin 11.
+ *
+ * This sketch demonstrates the use of the NewRemoteTransmitter class.
+ *
+ * When run, this sketch switches some pre-defined devices on and off in a loop.
+ *
+ * NOTE: the actual receivers have the address and group numbers in this example
+ * are only for demonstration! If you want to duplicate an existing remote, please
+ * try the "retransmitter"-example instead.
+ * 
+ * To use this actual example, you'd need to "learn" the used code in the receivers
+ * This sketch is unsuited for that.
+ * 
+ */
+
+#include <NewRemoteTransmitter.h>
+
+// Create a transmitter on address 123, using digital pin 11 to transmit, 
+// with a period duration of 260ms (default), repeating the transmitted
+// code 2^3=8 times.
+NewRemoteTransmitter transmitter(123, 11, 260, 3);
+
+void setup() {
+}
+
+void loop() {  
+  // Switch unit 2 off
+  transmitter.sendUnit(2, false);
+
+  // Switch all devices in the group off
+  transmitter.sendGroup(false);
+
+  // Set unit 1 to dim-level 3 (range 0-15)
+  transmitter.sendDim(1, 3);  
+
+  // Wait 5 seconds
+  delay(5000);
+  
+
+  // Switch unit 2 on
+  transmitter.sendUnit(2, true);
+
+  // Switch all devices in the group on
+  transmitter.sendGroup(true);
+
+  // Set unit 1 to dim-level 15, full brightness.
+  transmitter.sendDim(1, 15);
+
+  // Wait 5 seconds
+  delay(5000);
+}