chriz/OpenMQTT-Gateway
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 5 Wiki Activity

Update IRRemoteESP8266 version to 2.5.5

Browse Source 
factorize IR send signal function between the 2 types of receiving
Add new IRRemoteESP8266 protocols
replace pins on mega according schema
remove unecessaries spaces
This commit is contained in:
Florian committed 2019-02-08 16:50:37 +01:00
1 parent 0180a0dbd5
commit f0305236db
149 files changed
+20957 -7850
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

lib/IRremoteESP8266/examples/IRsendDemo/IRsendDemo.ino
+13 -12
View File
@@ -1,11 +1,11 @@
/* IRremoteESP8266: IRsendDemo - demonstrates sending IR codes with IRsend.
*
* Version 1.0 April, 2017
* Version 1.1 January, 2019
* Based on Ken Shirriff's IrsendDemo Version 0.1 July, 2009,
* Copyright 2009 Ken Shirriff, http://arcfn.com
*
* An IR LED circuit *MUST* be connected to the ESP8266 on a pin
* as specified by IR_LED below.
* as specified by kIrLed below.
*
* TL;DR: The IR LED needs to be driven by a transistor for a good result.
*
@@ -34,9 +34,9 @@
#include <IRremoteESP8266.h>
#include <IRsend.h>
#define IR_LED 4 // ESP8266 GPIO pin to use. Recommended: 4 (D2).
const uint16_t kIrLed = 4; // ESP8266 GPIO pin to use. Recommended: 4 (D2).
IRsend irsend(IR_LED); // Set the GPIO to be used to sending the message.
IRsend irsend(kIrLed); // Set the GPIO to be used to sending the message.
// Example of data captured by IRrecvDumpV2.ino
uint16_t rawData[67] = {9000, 4500, 650, 550, 650, 1650, 600, 550, 650, 550,
@@ -46,6 +46,10 @@ uint16_t rawData[67] = {9000, 4500, 650, 550, 650, 1650, 600, 550, 650, 550,
650, 550, 650, 550, 600, 550, 650, 550, 650, 550,
650, 1650, 600, 550, 650, 1650, 650, 1650, 650, 1650,
650, 1650, 650, 1650, 650, 1650, 600};
// Example Samsung A/C state captured from IRrecvDumpV2.ino
uint8_t samsungState[kSamsungAcStateLength] = {
0x02, 0x92, 0x0F, 0x00, 0x00, 0x00, 0xF0,
0x01, 0xE2, 0xFE, 0x71, 0x40, 0x11, 0xF0};
void setup() {
irsend.begin();
@@ -53,19 +57,16 @@ void setup() {
}
void loop() {
#if SEND_NEC
Serial.println("NEC");
irsend.sendNEC(0x00FFE01FUL, 32);
#endif // SEND_NEC
irsend.sendNEC(0x00FFE01FUL);
delay(2000);
#if SEND_SONY
Serial.println("Sony");
irsend.sendSony(0xa90, 12, 2);
#endif // SEND_SONY
irsend.sendSony(0xa90, 12, 2); // 12 bits & 2 repeats
delay(2000);
#if SEND_RAW
Serial.println("a rawData capture from IRrecvDumpV2");
irsend.sendRaw(rawData, 67, 38); // Send a raw data capture at 38kHz.
#endif // SEND_RAW
delay(2000);
Serial.println("a Samsung A/C state from IRrecvDumpV2");
irsend.sendSamsungAC(samsungState);
delay(2000);
}