From e47b32b1f69d6d16bda33a37860fa06769df5edf Mon Sep 17 00:00:00 2001
From: 1technophile <florian.robert@gmail.com>
Date: Sun, 30 Apr 2017 23:34:58 +0200
Subject: [PATCH] add of ZgatewayBT

---
 OpenMQTTGateway.ino | 10 +++++-
 ZgatewayBT.ino      | 85 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 94 insertions(+), 1 deletion(-)
 create mode 100644 ZgatewayBT.ino

diff --git a/OpenMQTTGateway.ino b/OpenMQTTGateway.ino
index d26102f..3c5e97b 100644
--- a/OpenMQTTGateway.ino
+++ b/OpenMQTTGateway.ino
@@ -126,6 +126,9 @@ void setup()
   #ifdef ZgatewayRF
     setupRF();
   #endif
+  #ifdef ZgatewayBT
+    setupBT();
+  #endif
 
 }
 
@@ -191,9 +194,14 @@ void loop()
       if(resultIR)
       trc(F("IR successfully sent by MQTT"));
     #endif
+    #ifdef ZgatewayBT
+      boolean resultBT = BTtoMQTT();
+      if(resultBT)
+      trc(F("BT successfully sent by MQTT"));
+    #endif
     
   }
-  delay(100);
+  //delay(100);
 }
 
 void storeValue(long MQTTvalue){
diff --git a/ZgatewayBT.ino b/ZgatewayBT.ino
new file mode 100644
index 0000000..c362aac
--- /dev/null
+++ b/ZgatewayBT.ino
@@ -0,0 +1,85 @@
+/*  
+  OpenMQTTGateway  - ESP8266 or Arduino program for home automation 
+
+   Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal  and a MQTT broker 
+   Send and receiving command by MQTT
+ 
+  This program enables to:
+ - receive MQTT data from a topic and send IR signal corresponding to the received MQTT data
+ - publish MQTT data to a different topic related to received IR signal
+
+  Copyright: (c)1technophile
+
+IMPORTANT NOTE: On arduino connect IR emitter pin to D9 , comment #define IR_USE_TIMER2 and uncomment #define IR_USE_TIMER1 on library <library>IRremote/IRremoteInt.h so as to free pin D3 for RF RECEIVER PIN
+  
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software 
+and associated documentation files (the "Software"), to deal in the Software without restriction, 
+including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, 
+and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, 
+subject to the following conditions:
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED 
+TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 
+THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF 
+CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+#ifdef ZgatewayBT
+#include <SoftwareSerial.h>
+
+#define STRING_MSG "OK+DISC"
+#define QUESTION_MSG "AT+DISI?"
+#define RESPONSE_MSG "OK+DISIS"
+
+//SoftwareSerial softserial(D7, D6);
+SoftwareSerial softserial(10, 11);
+unsigned long time1 = 0;
+
+void setupBT() {
+  Serial.begin(57600);
+  softserial.begin(9600);
+  softserial.print(F("AT+ROLE1"));
+  delay(100);
+  softserial.print(F("AT+IMME1"));
+  delay(100);
+  softserial.print(F("AT+RESET"));
+  delay(100);
+}
+
+boolean BTtoMQTT() {
+  while (softserial.available() > 0) {
+    #ifdef ESP8266
+      yield();
+    #endif
+
+    String response = softserial.readString();
+    Serial.println(response);
+    if (response.indexOf(STRING_MSG)>=0)
+    {
+      response.replace(RESPONSE_MSG,"");
+      int device_number = response.length()/78;
+      Serial.println(device_number);
+      
+      for (int i=0;i<device_number;i++){
+           String onedevice = response.substring(0,78);
+           onedevice.replace(STRING_MSG,"");
+           Serial.println(onedevice);
+           String company = onedevice.substring(1,9);
+           Serial.println(company);
+           String uuid = onedevice.substring(10,42);
+           Serial.println(uuid);
+           String others = onedevice.substring(43,53);
+           Serial.println(others);
+           String mac = onedevice.substring(54,66);
+           Serial.println(mac);
+           String rssi = onedevice.substring(67,71);
+           Serial.println(rssi);
+           response = response.substring(78);
+        }
+      }
+  }
+  if (millis() > (time1 + 10000)) {//retriving value of adresses and rssi
+       time1 = millis();
+       softserial.print(F(QUESTION_MSG));
+  }
+}
+#endif