chriz/OpenMQTT-Gateway
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 5 Wiki Activity

add wifi advanced setup into user_config.h (#506)

Browse Source 
* add wifi advanced setup into user_config.h

#496

* add advanced network config for wifi
This commit is contained in:
Florian authored and GitHub committed 2019-12-14 18:18:30 +01:00
1 parent 7f9d8d18da
commit e44717bac7
3 files changed
+54 -38
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

main/User_config.h
+20 -15
View File
@@ -50,18 +50,29 @@
#ifndef Gateway_Name
#define Gateway_Name "OpenMQTTGateway"
#endif
#define Base_Topic "home/"
/*-------------DEFINE YOUR NETWORK PARAMETERS BELOW----------------*/
//#define NetworkAdvancedSetup true //uncomment if you want to set advanced network parameters for arduino boards, not uncommented you can set the IP and mac only
#ifdef NetworkAdvancedSetup // for arduino boards advanced config
// these values are only used if no dhcp configuration is available
const byte ip[] = { 192, 168, 1, 99 }; //ip adress
const byte gateway[] = { 0, 0, 0, 0 }; //ip adress, if first value is different from 0 advanced config network will be used and you should fill gateway & dns
const byte Dns[] = { 0, 0, 0, 0 }; //ip adress, if first value is different from 0 advanced config network will be used and you should fill gateway & dns
const byte subnet[] = { 255, 255, 255, 0 }; //ip adress
#endif
#if defined(ESP8266)||defined(ESP32) // for nodemcu, weemos and esp8266
//#define ESPWifiManualSetup true //uncomment you don't want to use wifimanager for your credential settings on ESP
#else // for arduino boards
const byte ip[] = { 192, 168, 1, 99 }; //ip adress
const byte mac[] = { 0xDE, 0xED, 0xBA, 0xFE, 0x54, 0x95 }; //W5100 ethernet shield mac adress
#endif
#if defined(ESPWifiManualSetup) // for nodemcu, weemos and esp8266
#define wifi_ssid "wifi ssid"
#define wifi_password "wifi password"
#else // for arduino + W5100
const byte mac[] = { 0xDE, 0xED, 0xBA, 0xFE, 0x54, 0x95 }; //W5100 ethernet shield mac adress
#endif
#define WifiManager_password "your_password" //this is going to be the WPA2-PSK password for the initial setup access point
@@ -69,6 +80,13 @@
#define WifiManager_ConfigPortalTimeOut 120
#define WifiManager_TimeOut 5
/*-------------DEFINE YOUR ADVANCED NETWORK PARAMETERS BELOW----------------*/
//#define MDNS_SD //uncomment if you want to use mdns for discovering automatically your ip server, please note that MDNS with ESP32 can cause the BLE to not work
#define maxMQTTretry 10 //maximum MQTT connection attempts before going to wifimanager setup if never connected once
//set minimum quality of signal so it ignores AP's under that quality
#define MinimumWifiSignalQuality 8
/*-------------DEFINE YOUR MQTT PARAMETERS BELOW----------------*/
//MQTT Parameters definition
//#define mqtt_server_name "www.mqtt_broker.com" // instead of defining the server by its IP you can define it by its name, uncomment this line and set the correct MQTT server host name
@@ -109,19 +127,6 @@ char gateway_name[parameters_size * 2] = Gateway_Name;
//#define ZmqttDiscovery "HADiscovery"//ESP8266, Arduino, ESP32, Sonoff RF Bridge
//#define ZactuatorFASTLED "FASTLED" //ESP8266, Arduino, ESP32, Sonoff RF Bridge
/*-------------DEFINE YOUR ADVANCED NETWORK PARAMETERS BELOW----------------*/
//#define MDNS_SD //uncomment if you want to use mdns for discovering automatically your ip server, please note that MDNS with ESP32 can cause the BLE to not work
#define maxMQTTretry 10 //maximum MQTT connection attempts before going to wifimanager setup if never connected once
//set minimum quality of signal so it ignores AP's under that quality
#define MinimumWifiSignalQuality 8
// these values are only used if no dhcp configuration is available
const byte ip[] = { 192, 168, 1, 99 }; //ip adress
const byte gateway[] = { 0, 0, 0, 0 }; //ip adress, if first value is different from 0 advanced config network will be used and you should fill gateway & dns
const byte Dns[] = { 0, 0, 0, 0 }; //ip adress, if first value is different from 0 advanced config network will be used and you should fill gateway & dns
const byte subnet[] = { 255, 255, 255, 0 }; //ip adress
/*-------------DEFINE YOUR MQTT ADVANCED PARAMETERS BELOW----------------*/
#define version_Topic "/version"
#define will_Topic "/LWT"