OpenMQTTGateway refactoring of 433toMQTTto433 and 433nIRtoMQTTtoIRn433

User_config.h

@@ -0,0 +1,108 @@
+/*  
+  OpenMQTTGateway  - ESP8266 or Arduino program for home automation 
+
+   Act as a wifi or ethernet gateway between your 433mhz/infrared IR signal  and a MQTT broker 
+   Send and receiving command by MQTT
+ 
+  This program enables to:
+ - receive MQTT data from a topic and send RF 433Mhz signal corresponding to the received MQTT data
+ - publish MQTT data to a different topic related to received 433Mhz signal
+ - receive MQTT data from a topic and send IR signal corresponding to the received MQTT data
+ - publish MQTT data to a different topic related to received IR signal
+ 
+  Copyright: (c)1technophile
+
+  Contributors:
+  - crankyoldgit
+  - Spudtater
+  
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software 
+and associated documentation files (the "Software"), to deal in the Software without restriction, 
+including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, 
+and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, 
+subject to the following conditions:
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED 
+TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 
+THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF 
+CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+/*----------------------------USER PARAMETERS-----------------------------*/
+/*-------------DEFINE YOUR MQTT & NETWORK PARAMETERS BELOW----------------*/
+//MQTT Parameters definition
+#define mqtt_server "192.168.1.17"
+#define mqtt_user "your_username" // not compulsory only if your broker needs authentication
+#define mqtt_password "your_password" // not compulsory only if your broker needs authentication
+
+// Update these with values suitable for your network.
+#ifdef ESP8266 // for nodemcu, weemos and esp8266
+  #define wifi_ssid "wifi ssid"
+  #define wifi_password "wifi password"
+#else // for arduino + W5100
+  const byte mac[] = {  0xDE, 0xED, 0xBA, 0xFE, 0x54, 0x95 }; //W5100 ethernet shield mac adress
+  const byte ip[] = { 192, 168, 1, 95 }; //W5100 ethernet shield ip adress
+#endif
+
+//Addons management, comment the line if you don't use
+//#define ZaddonDHT true
+
+/*----------------------------OTHER PARAMETERS-----------------------------*/
+/*-------------------CHANGING THEM IS NOT COMPULSORY-----------------------*/
+//variables to avoid duplicates for RF
+#define time_avoid_duplicate 3000 // if you want to avoid duplicate mqtt message received set this to > 0, the value is the time in milliseconds during which we don't publish duplicates
+
+//MQTT definitions
+//RF MQTT Subjects
+#define GatewayName "OpenMQTTGateway"
+#define GatewayAnnouncementTopic "OpenMQTTGateway connected"
+#define GatewayAnnouncementMsg "hello broker!"
+// global MQTT subject listened by the gateway to execute commands (send RF, IR or others)
+#define subjectMQTTtoX "home/commands/#"
+#define subjectAck "/ack"
+
+//433Mhz MQTT Subjects and keys
+#define subjectMQTTto433 "home/commands/MQTTto433"
+#define subject433toMQTT "home/433toMQTT"
+#define RFprotocolKey "433_" // protocol will be defined if a subject contains RFprotocolKey followed by a value of 1 digit
+#define RFpulselengthKey "PLSL_" // pulselength will be defined if a subject contains RFprotocolKey followed by a value of 3 digits
+//IR MQTT Subjects
+#define subjectIRtoMQTT "home/sensors/ir"
+#define subjectMQTTtoIR "home/commands/MQTTtoIR"
+/*
+RF supported protocols
+433_1
+433_2
+433_3
+433_4
+433_5
+433_6
+IR supported protocols
+IR_NEC
+IR_LG
+IR_Sony
+IR_DISH
+IR_Sharp
+IR_SAMSUNG
+IR_COOLIX
+IR_Whynter
+*/
+
+//IR PIN definition
+#define IR_RECEIVER_PIN 2 // put 2 = D4 on nodemcu, 2 = D2 on arduino
+#define RF_EMITTER_PIN 4 //put 4 = D2 on nodemcu, 4 = D4 on arduino
+
+#ifdef ESP8266
+  #define IR_EMITTER_PIN 14 // 14 = D5 on nodemcu #define only usefull for ESP8266
+  //RF PIN definition
+  #define RF_RECEIVER_PIN 5 //  5 = D1 on nodemcu
+#else
+  //IMPORTANT NOTE: On arduino UNO connect IR emitter pin to D9 , comment #define IR_USE_TIMER2 and uncomment #define IR_USE_TIMER1 on library <library>IRremote/IRremoteInt.h so as to free pin D3 for RF RECEIVER PIN
+  //RF PIN definition
+  #define RF_RECEIVER_PIN 1 //  1 = D3 on arduino
+#endif
+//RF number of signal repetition
+#define RF_EMITTER_REPEAT 20
+
+//Do we want to see trace for debugging purposes
+#define TRACE 1  // 0= trace off 1 = trace on